Epson Projector Emp 8150nl User Manual

 Installation - 79




 
Installation
This section explains how to install the EasyMP.net Software. Four types of software (EMP 
Scenario, EMP Tablet, EMP File Utility and EMP Link V) and the PDF users guide for EMP 
Link V will be installed simultaneously when the installation procedure is executed.
Operating Environment
Check the following to ensure that the software can operate on the computer in use.
 Windows Operating Environment
*20MByte or more is required for the Chinese and Korean languages.
...

80 - Installation
Installation
This section explains how to install the software using the Windows 98 screens. Software instal-
lation into the Windows 95 platform follows the same procedure.
Point
The EMP Link V users guide will be installed onto the personal computer together with the 
software in the PDF format. Acrobat reader is required to read this. If Acrobat Reader is not 
available on the personal computer in use, it is recommended that it is installed at the same 
time as EMP Link V.
 In the...

 Installation - 81
 In the case of the Macintosh
1Start up the Macintosh and then set the CD-ROM in place.
2Double-click on the EMP Link Installer icon.
The set-up program will start up automatically.
3Select the language and click on the [OK] button.
Proceed with all subsequent screens in accordance with the instructions provided.
Point
Drag the [EMP LinkV] folder and [EMP LinkV] contained in [System] – [Default Settings] 
into the trash can to un-install the program.
Reading the User’s Guide
 In the...

82 - Computer Connections




 
Computer Connections
Establish a serial connection between the computer and projector when EMP Link V is being 
used. The computer and projector can be connected together with serial.
Serial Connections
Point
·Depending on the shape of the computer port, an adapter may be required for connection 
purposes. Refer to the computer’s instruction manual for further details.
·The connected computer is used to amend the projector settings and to perform opera-
tions. Connect the...

 Computer Connections - 83
 Macintosh Computers
Connect the projector’s Mouse/Com Port to the computer’s printer port or modem port with 
the use of the Mac Serial Cable and main cable supplied.
MAC SERIAL
Mouse/Com Port
Main Cable
 (supplied with the projector) Mac Serial Cable 
(supplied with the projector) Printer Port or 
Modem Port 

84 - Troubleshooting
Troubleshooting
This section provides explanations on potential problems and the methods of taking care of them.




 
Troubleshooting
When you think you have a problem, first of all check the Indicators on the projector.
The projector is fitted with Operation Indicator, Lamp Indicator and Temperature Indicator to 
advise the user of the projector’s status.
Operation Indicator
Indicator StatusCauseRecovery or StatusReference 
Page
Illuminated in 
OrangeStand-by status (Not an error)...

 Troubleshooting - 85
Lamp Indicator
Blinking in 
GreenWarm-up in 
progress(Not an error)
·Wait for a moment.
·The amount of time required for the warm-up 
procedure is approximately 30 seconds.
·The green lamp will stop blinking and 
become illuminated once the warm-up 
procedure has been completed.42
Illuminated in 
RedInternal  error Cease operations, remove the Power Plug from 
the socket and contact your dealer or nearest 
address provided at page 107 and request 
repairs.
Extinguished The power is...

86 - Troubleshooting
Temperature Indicator
Point
·Refer to the section on [When the Indicators Provide No Help] on the following page if the 
Indicators appear normal but the projected image is defective.
·Contact your dealer if an Indicator status not covered by the above table is apparent.
Indicator StatusCauseRecovery and StatusReference 
Page
Illuminated in 
RedExcessive internal 
temperature
(overheating)·Use the projector within the permissible 
temperature range of between 5 degrees 
Celsius and...

 When the Indicators Provide No Help - 87




 
When the Indicators Provide No Help
Refer to each relevant item if the following situations arise but the indicators provide no help.
·The image is not projected page 87
·No sound page 92
·The image is out of focus page 89
·The remote control won’t work page 92
·The image is distorted page 90
·The projecter will not switch off page 93
·The image color is bad page 91
·The EMP Link V will not function page 93
·The image is dark page 91
The image is not...

88 - When the Indicators Provide No Help Messages
[Not Supported] 
will be displayed
[No Signal]
will be displayed
Is the resolution of the image signal output from the computer 
higher than UXGA (1,600 x 1,200)?
see page 27
Check to ensure that the mode supports the frequency of the image 
signals output from the computer.
Refer to the computer’s instruction manual to discover how to amend 
the resolution and frequency of the image signals output from the 
computer.
see page 27
Have the cables been...