Home > Epson > Projector > Epson Projector Emp 8150nl User Manual

Epson Projector Emp 8150nl User Manual

Here you can view all the pages of manual Epson Projector Emp 8150nl User Manual. The Epson manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 71

 Menu Operations - 69
Video Smooth Motion Images, etc., will move smoothly when seen after this has 
been set at [ON]. Set this at [OFF] if the colors appear to 
flicker.ON
Video Signal Sets the video signal method.
Press the [Enter] button and select the required setting from 
the video signal method selection menu displayed.
·The video signal method will be automatically set up in the 
[Auto] mode, but do not use the [Auto] mode for the PAL 
system (60Hz).Auto
Reset Returns all image menu adjustment...

Page 72

70 - Menu Operations
Effect Bar Sets the color, direction and width of the bar allocated to the 
[4] button.
Press the [Enter] button and select the required item from the 
bar setup menu. The color, direction and width can be 
selected independently for each of the settings between 1 
and 3.
·The [4] button executes the bar function. The bar types will 
be switched between 1 and 3 sequentially for each time the 
[4] button is pressed. (see page 61
)Individual
settings 
between types 1 
to 3
Cursor Speed...

Page 73

 Menu Operations - 71
Setting Sleep Mode Sets the energy-saving function for when no image signals 
are being input. When this is set at [ON], projection will be 
automatically ended and the projector will enter the sleep 
mode if no image signals are input and no operations are 
performed for a period of thirty minutes (the operation indi-
cator will be illuminated in orange).
Press the [Power] button to restart projection.ON
Reset Returns all setting menu adjustment values to the default 
values.
Press...

Page 74

72 - Menu Operations
· The image menu and information displayed will differ in accordance with the projected input 
source, and Menus other than that belonging to the projected input source cannot be adjusted.
·The information menu displays the status of the input source settings being projected.
·If a message stating [Image capture failed] is displayed on the screen, there is a possibility that a 
system error occurred with EasyMP.net. Switch the projected image across to EasyMP.net and 
resolve the...

Page 75

 Menu Operations - 73
Image capture
The image currently being displayed will be saved onto the memory card.
1Displays the images that are to be captured.
2Press the [Menu] button and then select [Capture] - [Image Capture].
A confirmation screen will be displayed.
3Select [Yes] and then press the [Enter].
A screen to reconfirm the image to be registered will be displayed.
4Select [Yes] and then press the [Enter].
The image will be saved. Wait for a moment until the saving completion screen is dis-...

Page 76

74 - Menu Operations
5Press the [Enter] button or the [Esc] button.
The capture function will be ended and the screen will return to the menu.
Point
·A certain amount of time is required for the saving process. Do not operate the projector 
or connected equipment while saving is in progress. Failure to observe this may result in 
defects.
·Images cannot be saved if the memory card has not been inserted.
·Do not remove the memory card while images are being saved.
·A [Capture] folder will be created on...

Page 77

 Menu Operations - 75
User logo registration
Registers the images currently displayed as the user logo.
1Displays the image that is to be registered as the user logo.
2Press the [Menu] button and select [Capture] - [User Logo Capture].
The confirmation screen will be displayed.
3Select [Yes] and then press the [  (Enter)] button on the main unit (the [Enter] button 
on the remote control).
The image to be registered will be displayed.
4Adjust the position of the image and then press the [  (Enter)]...

Page 78

76 - Menu Operations
5Select [Yes] and then press the [ (Enter)] button on the main unit (the [Enter] button 
on the remote control).
The enlargement setup screen will be displayed.
6Select the enlargement rate and then press the [ (Enter)] button on the main unit (the 
[Enter] button on the remote control).
The screen to confirm saving will be displayed.
7Select [Yes] and then press the [ (Enter)] button on the main unit (the [Enter] button 
on the remote control).
The image will be saved. Wait until...

Page 79

 Introduction of EasyMP.net Software - 77
Using the EasyMP.net Software
This section provides explanations on the operations required for installing the optional EasyMP.net Software and EMP link V.

 Introduction of EasyMP.net Software
The EasyMP.net PC applications and EMP Link V presentation support software is stored on 
the [EasyMP.net Software] CD-ROM.
Presentation support software
 EMP Link V 
Enables the projector settings to be amended from the computer. This allows functions to be...

Page 80

78 - Introduction of EasyMP.net Software
EasyMP.net PC applications
 EMP File
It is possible to control the files saved onto the projectors memory card remotely from a com-
puter.
 EMP Tablet
It is possible to operate the cursor and execute functions remotely with the computer mouse 
when EasyMP.net images are being projected.
 EMP Scenario
It is possible to create image scenarios for projection purposes.
Point
·Refer to the EasyMP.net Users Guide for details on using EasyMP.net and the 
EasyMP.net...
Start reading Epson Projector Emp 8150nl User Manual

Related Manuals for Epson Projector Emp 8150nl User Manual

All Epson manuals