Epson Projector Emp 7100 User Manual
Here you can view all the pages of manual Epson Projector Emp 7100 User Manual. The Epson manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 41
23 AUTO Button If you are using image input from a computer, you can press the AUTO button after fitting the image to the screen. Pressing AUTO automatically adjusts the computer input signal to the current projector settings.* * Press the AUTO button while the image fills the entire screen of your computer, like a Windows screen. Cer tain computer input signals may not be totally compatible with AUTO button settings. In such cases, use the menus to make additional adjustments. Resize Button The Resize...
Page 42
242 ¥ Using the Projector Controlling the Projector Normally you control the projector using the remote control. The buttons on the remote control allow you to do the following: ¥ Switch power on and off. ¥ Auto-set-up of the computer image screen. ¥ Switch between input images (Computer 1, Computer 2, video- computer). ¥ Access menu for adjustment of image, audio, video, and display settings. ¥ Control resizing. ¥ Control display freeze. ¥ Control display blanking. ¥ Adjust and mute audio output. ¥...
Page 43
25 The functions of the remote control buttons are summarized on page 27. To be able to use the remote control as a cordless mouse connect the projector to your computer with the cables came with the ELP Communication Kit II . To use the remote control, always point it towards the remote control receivers located at the front of the projector. You can use the remote control up to 10 metres (33 feet) from the projector. In addition to the remote control, you can also control the projector by using the...
Page 45
27Controlling the Projector Remote Control Button/controller Function Menu Displays or closes the menu. AutoAutomatically adjusts the graphic signal being sent from a computer to optimize it for projection. Video Switches from computer to video. Computer Switches between Computer 1 and Computer 2, and from video to computer. Effects 1 ~ 5 Function buttons for add-on functions which can be assigned using the ELP Link II software that comes with the projector. Pointer Moves the computer Õs pointer when the...
Page 46
282 ¥ Using the Projector Operation Panel Button/controller Function Power Turns power on and off. Menu Displays or closes the menu. Video Switches from computer to video. Computer Switches between Computer 1 and Computer 2, and from video to computer. AutoAutomatically adjusts the graphic signal being sent from a computer to optimize it for projection. Resize Switches the display dot mode and resize mode (EMP-7100 : for VGA, SVGA and SXGA input EMP-5100 : for VGA and XGA input). Volume ±Adjusts the...
Page 47
29 Checking the Status of the Projector The projector is equipped with an operation indicator and a projec- tion lamp indicator. These indicate the current status of the projector at a glance. Note that a red indicator is warning you of a serious problem. See page 82 for details on what action is required when a red indicator lights up or flashes. Operation Indicator Colour Status Meaning Orange Lit Sleep mode Green Lit Projection lamp is lit and projector is projecting. Orange Flashing The projector...
Page 48
302 ¥ Using the Projector Projection Lamp Indicator Colour Status Meaning Off Projection lamp is off. Green Lit Projection lamp is lit. Green Flashing The projector is warming up. Orange Flashing Projection lamp is reaching the end of its life and and Red alternately should be replaced with a new one. Orange Flashing The projector is cooling. Red Lit Projection lamp has reached the end of its life and will no longer project images. Replace the projection lamp with a new one. Red Flashing Projection lamp...
Page 49
31 Using the Menus The projector menus allow you to do the following: ¥Adjust the brightness, contrast, synchronization, tracking, vertical and horizontal alignment, and color balance of the computer screen, and mouse/serial locking (Computer Menu) ¥Adjust the brightness, contrast, color saturation, tint, and signal system of the video screen (Video Menu) ¥Adjust the volume level, tone setting, and Spatializer (Audio Menu) ¥Select color temperature, rear projection, ceiling mount, screen blank- ing,...
Page 50
323 ¥ Using the Menus Accessing the Menus Press the Menu button to display the main menu on the screen. Press the Menu button again to close the menu. The currently selected menu item is highlighted on the screen.