Epson Projector Emp 7100 User Manual
Here you can view all the pages of manual Epson Projector Emp 7100 User Manual. The Epson manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 21
3 All of the above items may not be required for your particular computer system uWarning: Keep the plastic bags for the projector, accessories and optional parts out of the reach of small children. A plastic bag over the head of a small child can result in death by suffocation. Save all packaging materials in case you need to ship the projector in the future. It should always be transported in its original packaging or the equivalent. Additional Items The following items may also be required, depending...
Page 22
41 ¥ Installation ¥Special connector, cable or components for connecting the mouse cable to your computer These items should be available from your computer dealer. Note that the mouse cable cannot be used with a computer that does not have a mouse connector. uNote: The hole on the right side of the projector accepts the connection of the Kensington MicroSaver anti-theft device, which can be pur chased at your local computer dealer.
Page 23
5Setting Up the Projector Setting Up the Projector 1. Place the projector on a stur dy, level surface within five feet of the computer or video source. 2. Place the projector the correct distance from the screen. The distance between the projector and the screen deter mines the actual image size. Use the general guidelines below to determine the correct distance. Screen size 300 inches (610x460cm) 10.0 m (393.7 inches) 200 inches (410x300cm) 6.7 m (263.8 inches) ~ 8.7 m (342.5 inches) 100 inches...
Page 24
61 ¥ Installation 4. Connect one end of the power cable to the projectorÕs power connector. Connect the other end to an earthed electrical socket. The projector should be in sleep mode, indicated by an orange power indicator. uWarning: Never look into the lens when the pr ojector is on. There is a risk that the projector might come on suddenly even though it is not in use. The light from the lamp can damage your eyes. It is especially important that children should not be allowed to look into the lens....
Page 25
7 When replacing batteries, take the following precautions: ¥Do not mix old and new batteries. ¥Do not recharge used batteries or expose batteries to fire or water. ¥Replace batteries as soon as they run out. If the batteries leak, wipe away the fluid with a soft cloth. If batter y fluid gets onto your hands wash them immediately. ¥Remove the batteries if you will not be using the projector for a long period. Connecting to a Computer You can connect the projector to a computer capable of SVGA, VGA, SXGA...
Page 26
81 ¥ Installation Connecting to a PC desktop computer Before beginning, make sure that the projector and computer are both turned of f. 1. Connect either end of the computer cable to the projectorÕs Computer In 1 port. The Computer In 2 por t is used when connecting a second computer. 2. Disconnect the computerÕs monitor cable from the computerÕs monitor port and connect the other end of the computer cable to this port. 3. If necessary, connect the monitor cable of the computer monitor to the projectorÕs...
Page 27
9Connecting to a Computer ¥If your system uses a serial mouse, perfor m steps 6 and 7 using the serial mouse cable instead of the PS/2 mouse cable. Computer In 1 Computer In 2 Monitor Audio In 1 Audio In 2 Audio Out S-Video Video InAudio In LR Remote 1-Mouse/ Com-2 Connecting to a PC laptop computer Before beginning, make sure that the projector and computer are both turned of f. 1. Connect either end of the computer cable to the projectors Computer In 1 port. The Computer In 2 por t is used when...
Page 28
101 ¥ Installation 6.Disconnect the computerÕs mouse cable from the mouse port on the back of the computer and connect the mouse connector of the PS/2 mouse cable (6-pin) to the mouse port on the back of your laptop. ¥ If your system uses a serial mouse, perform steps 6 and 7 using the serial mouse cable instead of the PS/2 mouse cable. 7. If you are planning to use the ELP Link II software, connect either end of a PC serial cable to the PC SERIAL terminal on the large end of the main cable. 8. Connect...
Page 29
11 Connecting to a Macintosh desktop computer Before beginning, make sure that the projector and computer are both turned of f. 1. Set the DIP switches of the MAC desktop adapter in accordance with the resolutions you want to use (i.e. 16Ó mode). 2. Disconnect the monitor cable from the computer and connect it to the large terminal (D-sub 15 pin) of the desktop adapter. 3. Tighten fixed screws for the desktop adapter. 4. Connect either end of the computer cable to the small terminal of the desktop...
Page 30
121 ¥ Installation 11. Connect the other end of the MAC serial cable to the printer port or modem port on the back of your Macintosh. 12. Tighten all connector screws to ensure secure connections. Computer In 1 Computer In 2 Monitor Audio In 1 Audio In 2 Audio Out S-Video Video InAudio In LR Remote 1-Mouse/ Com-2 Connecting to a Macintosh PowerBook Remember that you can only use a PowerBook model that have video-out capability. See page 7 for more information. Before beginning, make sure that the...