Home > Epson > Projector > Epson Projector Emp 7100 User Manual

Epson Projector Emp 7100 User Manual

Here you can view all the pages of manual Epson Projector Emp 7100 User Manual. The Epson manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 11

vii
Introduction
The compact, lightweight EPSON EMP-7100/5100 Projector allows you to
project XGA (EMP-7100), SVGA (EMP-5100) full-color images and video
onto a large screen for presentations. The projector can connect simultaneously
to three image sources: two PC or Apple
¨ Macintosh¨ computer image sources
plus on video source such as a video tape deck, camcorder, or digital camera.
Audio can also be connected for each image source.
Images are displayed in XGA (EMP-7100) and SVGA (EMP-5100) compat-...

Page 12

viiiIntroduction
Getting the Most Out of Your Projector
The projector comes with a full set of features that allow you to
control the settings for the image display, video and audio. To get the
most out of your projector read this section for a quick summary of
the important features.
Remote control
The buttons on the remote control allow you to turn the projector
on and off, an provide direct access to auto set-up, blank, freeze,
volume, mute and image source switching. Remote control buttons
can also...

Page 13

ix
Optional Accessories
To enhance your use of the projector, EPSON provides the following
accessories:
¥Carrying cases designed especially for the projector and its cables.
Both a soft and a hard case are available.
¥An ELP Link II cable set, a computer cable and a MAC adapter
set etc. to connect to another computer.
¥A remote control receiver which may be used when the projector
cannot be controlled directly with the remote control.
¥Replacement lamps.
You can purchase these accessories fr om your...

Page 14

xIntroduction
Safety Instructions
These graphics are used throughout the manual to draw your
attention to important information about the EMP-7100/5100.
uNote: Additional useful details or tips.
uCaution: Steps to avoid damage to your equipment.
uWarning: Steps to avoid personal injury.
Always follow these safety instructions when setting up and using the
projector:
1. Do not place the projector on an unstable trolley, stand or table.
2. Do not use the projector near water or sources of heat.
3. Use...

Page 15

xi
8. Do not place the projector where the cord can be stepped on as
this may result in fraying or damage to the lead or the plug.
9. Unplug the projector from the wall socket before cleaning. Use a
damp cloth for cleaning. Do not use liquid or aerosol cleaners.
10. Do not block the slots and openings in the projector case. They
provide ventilation and prevent the projector from overheating.
Do not place the projector on a sofa, rug or other soft sur face or
in a built-in installation unless proper...

Page 16

xiiIntroduction
Where to Get Help
SEIKO EPSON CORPORATION provides local customer support
and service through a nationwide network of authorized EPSON
dealers and Service Centres.
For inquiries please contact the appropriate representative listed in
the section entitled ÒAfter sales service contact addressesÓ at the end
of this manual.
When you call for technical assistance, be ready to identify your
system and its configuration.
If you need help with any software program you are using, please
refer to...

Page 17

xiiiTransporting your projector
Transporting your projector
The projector contains many glass par ts and precision parts. To
prevent shock damages while transporting, handle as the followings.
lwhen transport to a maker due to troubleshooting
¥ Use the original packing.
¥ If you dont have the original packaging, use the equivalent,
put cushioning around the pr ojector.
lwhen frequently transport for business use
¥ First, put the projector in a hard carrying case(ELPKS06), then
pack it in a firm box,...

Page 18

xivIntroduction
Remote control information
The EMP-7100/5100 can be operated by remote control via infrared
(IR) receivers located at the front of the projector. The projector may
not respond to remote control commands under the following
conditions:
¥ The ambient light is too bright.
¥ Cer tain types of fluorescent lighting are used.
¥ A strong light source shines into the IR receiver.
¥ Other equipment that emits infrared energy, such as a radiant
room heater, is in the r oom.
These conditions commonly...

Page 19

1
Installation
This chapter tells you how to unpack and set up your projector and
connect it to other equipment. The projector must be connected to a
computer or a video source such as a video tape deck, camcorder, digital
camera or laser disk player.
1 

Page 20

21 ¥ Installation
Unpacking the Projector
Make sure all of the following components are present when you
unpack the projector.
¥Projector
¥Lens cover
¥Remote control
¥2 AA batteries
¥Power cord
¥Computer cable
¥Audio cable
¥Video/audio cable
¥MAC adapter set
MAC Desktop adapter
MAC Monitor adapter
¥ELP Link II Kit
Main cable
PS/2 mouse cable
Serial mouse cable
MAC mouse cable
PC serial cable
MAC serial cable
ELP Link II for Windows
ELP Link II for Macintosh 
Start reading Epson Projector Emp 7100 User Manual

Related Manuals for Epson Projector Emp 7100 User Manual

All Epson manuals