Epson Projector Emp 5100 User Manual

							33
Changing Menu Settings
Use the remote controlÕs pointing button to select the menu you
want and then press the Click 1 or Click 2 button to display the
submenu.
You can also select a menu using the operation panelÕs the  and
  buttons and then pressing the  button to display
the submenu.
You cannot select video submenus when the input source is a
computer, or computer submenus when the input source is video.
Changing Menu Settings 
						

							343 ¥ Using the Menus
When a submenu is displayed on the screen, use the pointing button
or the  and  button to select the menu item you want.
Next, use the pointing button or the  and  buttons to
make adjustments to the settings of the item.
To return to the main menu from the submenu, select the Return
item in the submenu and then press a Click button or the 
button.
You may also close the menu by pressing the Menu button.
The following describes the items you may set in the submenus. 
						

							35
Video Menu (Computer)
With the Computer Menu allows you to may adjust settings related
to computer video signals and the wireless mouse.
POSITION
Select this item and then press a Click button or the  button
to enter the screen position adjustment mode. While in the screen
position adjustment mode, use the pointing button or the ,
,  and  buttons to move the screen position in
the corresponding direction.
After you are finished, press a Click button or the  button to
retur n to the Computer Menu.
TRACKING
Matches the projectorÕs internal clock to various computer graphic
signals. Adjust this setting to remove vertical fuzzy lines from the
image.
SYNC
Synchronizes with the tracking signal sent from the computer. Adjust
this setting whenever the overall image is fuzzy or to remove streaks
from the image.
BRIGHTNESS
Lightens or darkens the overall image. Increase brightness to make
the image lighter, or decrease it to make the image darker.
CONTRAST
Adjusts the relative difference between light and dark areas. Increase
contrast to make light areas lighter and dark areas darker, or decrease
it to lessen the difference between the light areas and dark areas of
the image.
Changing Menu Settings 
						

							363 ¥ Using the Menus
COLOR
Adjusts the color balance of the input source.
Select this item and then press a Click button or the  button
to enter the color adjustment mode. While in the color adjustment
mode, use the pointing button or the  and  button to
select a color. Next, use the pointing button or  and 
buttons to adjust the selected color. Increasing a colorÕs setting makes
that color more intense on the screen, while a lower setting makes the
color less intense.
After you are finished, press a Click button or the  button to
retur n to the Computer Menu.
MOUSE/COM
Locks and unlocks the Mouse/Com port.
Selecting 1 locks wireless mouse control to the computer connected
to the Mouse/Com 1 port. Even if the input source is switched to
Computer 2, the wireless mouse controls the computer connected to
Mouse/Com 1 only.
Selecting 2 locks wireless mouse control to the computer connected
to the Mouse/Com 2 port.
Selecting 1«2 tells the projector to automatically switch wireless
mouse control whenever the input source computer is changed.
RESET
Returns all Computer Menu items to their factor y defaults.
Select this item and then press a Click button or the  button
to display the confirmation screen.
Next, select Yes and then press a Click button or the  button
to reset the Computer Menu items. 
						

							37
If you change your mind, select No and then press a Click button or
the  button to clear the confirmation screen without chang-
ing any settings.
Video Menu (Video)
The Video Menu allows you to make adjustments related to video
signals from video equipment.
BRIGHTNESS
Lightens or darkens the overall image. Increase brightness to make
the image lighter, or decrease it to make the image darker.
CONTRAST
Adjusts the relative difference between light and dark areas. Increase
contrast to make light areas lighter and dark areas darker, or decrease
it to lessen the difference between the light areas and dark areas of
the image.
SATURATION
Adjusts color density. Increase color density to make colors darker
and more opaque, or decrease it to make colors lighter and less
opaque.
TINT (NTSC only)
Adjust the red-green balance of the screen. Increase tint to add more
green, or decrease it to add more red.
MODE
Specifies the video signal system. Normally this signal system setting
should be left at AUTO for automatic detection of the video signal
system. If automatic selection is not possible for some reason, use this
menu to manually specify NTSC, PAL or SECAM .
Changing Menu Settings 
						

							383 ¥ Using the Menus
VIDEO RESET
Returns all Video Menu items to their factor y defaults.
Select this item and then press a Click button or the  button
to display the confirmation screen.
Next, select Yes and then press a Click button or the  button
to reset the Video Menu items.
If you change your mind, select No and then press a Click button or
the  button to clear the confirmation screen without chang-
ing any settings.
Audio Menu
The Audio Menu allows you to make adjustments related to audio.
VOLUME
Adjusts the volume level for the speakers and audio-out terminal.
Increase the audio volume to raise the volume, or decrease it to lower
the volume.
TONE
Adjusts the tone of the speakers and audio-out terminal. Increase the
tone to raise the treble, or decrease it to raise the bass.
SPATIALIZER
Adjusts audio effects provided by the Spatializer.
Off: Normal sound for stereo input.
Normal: Expansive sound for stereo input.
Wide: More expansive sound for stereo input. 
						

							39
SOUND RESET
Returns all Audio Menu items to their factory defaults.
Select this item and then press a Click button or the  button
to display the confirmation screen.
Next, select Yes and then press a Click button or the  button
to reset the Audio Menu items.
If you change your mind, select No and then press a Click button or
the  button to clear the confirmation screen without chang-
ing any settings.
Option Menu
The Option Menu allows you to create basic settings that normally
do not need changing.
PROMPT
Temporarily displays a prompt on the projector screen to identify
which source (computer or video) is providing the image.
COLOR TEMP.
Adjusts the whiteness of the screen. The H setting provides a cold
white, M standard white, and L a warm white.
Selecting the User item and pressing a Click button or the 
button displays a screen for more precise color temperature setting.
Use the pointing button or the  and  buttons to select
the color you want to adjust, and then use the pointing button of the
 and  buttons to change the selected value. A high
color temperature value enhances the selected color within the overall
image, while a lower value weakens the color.
Changing Menu Settings 
						

							403 ¥ Using the Menus
Press a Click button or the  button to clear the setting screen
and retur n to the Option Menu.
REAR PROJ.
Mirrors the projected images horizontally (left-right). Selecting ON
turns mirroring on, while OFF turns it of f (for a normal image). Turn
this option on when projecting from behind onto a transparent
screen being viewed from the opposite side.
CEILING
Mirrors the projected images vertically (top-bottom) and horizontally
(left-right). Selecting ON turns mir roring on, while OFF turns it of f
(for a normal image). Turn this option on when hanging the projec-
tor upside-down from the ceiling.
BLANK
Selects what should be projected when the projectorÕs Blank button is
pressed to blank the screen. You can select either a black screen or a
user logo. A user logo can be created using the ELP Link II software
that comes with the projector.
VIEW CHANGE
Specifies the view change to use when the input source is changed.
OFF: No visual effects, simply cut to new source.
Diagonal: Original source screen shrinks from upper left to lower
right, and new source screen expands from upper left to lower
right.
Left ® Right: Original source screen shrinks from left to right, and
new source screen expands from left to right.
Fade: Original source screen shrinks from outside in, and new source
screen expands from inside out. 
						

							41
LANGUAGE
Selects the menu language in the sequence: Japanese, English,
German, French, Italian, Spanish and Portuguese.
LAMP
Displays the number of hours the current projector lamp has been
used. The color of this display turns r ed when the projector lamp is
near the end of its normal life. When this happens, replace the
projector lamp with a new one as soon as possible.
Changing Menu Settings 
						

							423 ¥ Using the Menus
Using Custom Functions
You can use the Custom Menu to assign the Zoom, Preview or
Strobe function to the remote controlÕs Custom button.
You can assign the following functions:
1. Zoom
Zooms in or out on the center of the displayed image.
2. Preview
Displays the projection images currently being entered by each of
the input sources. The screen is divided into four quadrants.
3. Strobe
Displays images on the screen in sequence. You can preset the
number of images to be displayed and the amount of time each
image is displayed.
To customize the functions:
1. Press the [Menu] button on the projector or remote control.
2. The main menu appears.
3. Select [Custom] by using the Sync+/Ð buttons on the projector
or the Pointer on the remote control.
4. Press [
 (Enter)] or the Left/Right Click buttons on the
remote control to call the Custom menu.
5. The Custom menu appears.
6. Select the function you want to assign to the [Custom] button on
the remote control.
7. Press [
 (Enter)] or the Left/Right Click buttons on the
remote control to enter your selection.