Epson Projector Emp 5100 User Manual
Here you can view all the pages of manual Epson Projector Emp 5100 User Manual. The Epson manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 61
![Page 61
43Changing Menu Settings
8. [Presently Selected] will appear right next to the function you
want to customize instead of [Select]. (If the function has been
selected already, [Presently Selected] appears.)
9. You are now finished.
*If you want to change the function you customized, perform the
above steps 1 to 8 again.
Using the functions:
* The [Volume], [Mute] and [Freeze] buttons are always available,
even when you have customized the above functions. However, if you
press any other button, its...](http://img.usermanuals.tech/thumb/23/89187/w300_epson-emp-5100-manual_d-60.png "Page 61
43Changing Menu Settings
8. [Presently Selected] will appear right next to the function you
want to customize instead of [Select]. (If the function has been
selected already, [Presently Selected] appears.)
9. You are now finished.
*If you want to change the function you customized, perform the
above steps 1 to 8 again.
Using the functions:
* The [Volume], [Mute] and [Freeze] buttons are always available,
even when you have customized the above functions. However, if you
press any other button, its...")
43Changing Menu Settings 8. [Presently Selected] will appear right next to the function you want to customize instead of [Select]. (If the function has been selected already, [Presently Selected] appears.) 9. You are now finished. *If you want to change the function you customized, perform the above steps 1 to 8 again. Using the functions: * The [Volume], [Mute] and [Freeze] buttons are always available, even when you have customized the above functions. However, if you press any other button, its...
Page 62
![Page 62
443 ¥ Using the Menus
3. The screen is divided into four quadrants, each of which shows
the projection images currently being entered by each of the
input sources.
4. The projection image is switched each time the [Right Click]
button on the remote control is pressed. (Each input source
name flashes on the screen.)
5. The Preview function is closed by pressing the [Left Click]
button on the remote control. Next the image you selected in
step 4 will be displayed on the screen.
6. The Preview function is...](http://img.usermanuals.tech/thumb/23/89187/w300_epson-emp-5100-manual_d-61.png "Page 62
443 ¥ Using the Menus
3. The screen is divided into four quadrants, each of which shows
the projection images currently being entered by each of the
input sources.
4. The projection image is switched each time the [Right Click]
button on the remote control is pressed. (Each input source
name flashes on the screen.)
5. The Preview function is closed by pressing the [Left Click]
button on the remote control. Next the image you selected in
step 4 will be displayed on the screen.
6. The Preview function is...")
443 ¥ Using the Menus 3. The screen is divided into four quadrants, each of which shows the projection images currently being entered by each of the input sources. 4. The projection image is switched each time the [Right Click] button on the remote control is pressed. (Each input source name flashes on the screen.) 5. The Preview function is closed by pressing the [Left Click] button on the remote control. Next the image you selected in step 4 will be displayed on the screen. 6. The Preview function is...
Page 63
![Page 63
45
3. Press the [Left click] button on the remote control once.
4. The Strobe display is started. (If you set the number of frames to
9, they are displayed in the order of 1 to 9.)
5. By pressing the [Left click] button on the remote control again,
you can go back to the step 2.
6. The Strobe function is cancelled by pressing the [Custom] button
on the remote control. (The screen will revert to the image
shown before the Preview function was used.)
To change the number of frames and the time interval:
1....](http://img.usermanuals.tech/thumb/23/89187/w300_epson-emp-5100-manual_d-62.png "Page 63
45
3. Press the [Left click] button on the remote control once.
4. The Strobe display is started. (If you set the number of frames to
9, they are displayed in the order of 1 to 9.)
5. By pressing the [Left click] button on the remote control again,
you can go back to the step 2.
6. The Strobe function is cancelled by pressing the [Custom] button
on the remote control. (The screen will revert to the image
shown before the Preview function was used.)
To change the number of frames and the time interval:
1....")
45 3. Press the [Left click] button on the remote control once. 4. The Strobe display is started. (If you set the number of frames to 9, they are displayed in the order of 1 to 9.) 5. By pressing the [Left click] button on the remote control again, you can go back to the step 2. 6. The Strobe function is cancelled by pressing the [Custom] button on the remote control. (The screen will revert to the image shown before the Preview function was used.) To change the number of frames and the time interval: 1....
Page 64
463 ¥ Using the Menus Counts of frames, Time Pressing the remote controlÕs Click 1 button while strobe display is being performed displays a screen for specification of the counts frames and the time interval. You can set the frame count to 4, 9 or 16, and the time interval from 0.1 to 1 second in 0.1 second incre- ments. Press the remote controlÕs Click 2 button again to clear the setting screen. RESET ALL Executing this command resets the settings in all menus to their factor y defaults. Select this...
Page 65
47 4 Using ELP Link II
Page 66
484 ¥ Using ELP Link II
Introduction
To use the ELP Link II software, you need one of the following
operational environments.
Windows Ver. 3.1 (English)
Windows 95 (English)
MacOS System (from ver. 7)
This instruction manual tells you how to use ELP Link II.
The application ELP Link II supports two functions related to the
projector.
One is the projector control function which enables you to control
the projector (screen display, sound, etc.) from a computer and to
manipulate the...
Page 67
49 How to connect ¥For IBM PCs and IBM compatible PCs (Windows) Please refer to the section ÒConnecting to a computerÓ in this manual (pages 7~14). ¥For Macintosh Please refer to the section ÒConnecting to a computerÓ in this manual (pages 7~14). How to connect
Page 68
![Page 68
504 ¥ Using ELP Link II
How to install
For IBM PCs and IBM compatible PCs (Windows)
Start Windows.
Insert the floppy disk with the ELP Link II software into floppy disk
drive [A]. (It is assumed your floppy disk drive is drive A.)
The ELP Link II software to be installed depends on the computer
you are installing it on.
Select the Run command from the File menu in the Program
Manager. The Run dialog box appears on the screen.
Type [A: SETUP.EXE] in the [Command Line] box and click the
[OK] button.
The...](http://img.usermanuals.tech/thumb/23/89187/w300_epson-emp-5100-manual_d-67.png "Page 68
504 ¥ Using ELP Link II
How to install
For IBM PCs and IBM compatible PCs (Windows)
Start Windows.
Insert the floppy disk with the ELP Link II software into floppy disk
drive [A]. (It is assumed your floppy disk drive is drive A.)
The ELP Link II software to be installed depends on the computer
you are installing it on.
Select the Run command from the File menu in the Program
Manager. The Run dialog box appears on the screen.
Type [A: SETUP.EXE] in the [Command Line] box and click the
[OK] button.
The...")
504 ¥ Using ELP Link II How to install For IBM PCs and IBM compatible PCs (Windows) Start Windows. Insert the floppy disk with the ELP Link II software into floppy disk drive [A]. (It is assumed your floppy disk drive is drive A.) The ELP Link II software to be installed depends on the computer you are installing it on. Select the Run command from the File menu in the Program Manager. The Run dialog box appears on the screen. Type [A: SETUP.EXE] in the [Command Line] box and click the [OK] button. The...
Page 69
51 For Macintosh Insert the floppy disk with the ELP Link II software into the floppy disk drive. The ELP Link II folder appears on the screen. Double- click the folder, then an ELP Link II icon will appear. Copy the icon to a local hard disk with a drag-and-drop action. To be able to use ELP Link II, restart the system. ¥When you install the ELP Link II software, make a new folder and designate the disk drive to be used. ¥Please refer to your Macintosh Instruction Manual. How to install
Page 70
524 ¥ Using ELP Link II Starting and exiting ELP Link II ¥To start ELP Link II Double-click the ELP Link II icon to start the application. First an opening screen appears, then the main ELP Link II window will appear with a reduced size. ¥For Windows 3.1 Double-click the minimized ELP Link II window. ¥For Windows 95 Click the ELP Link II button on the taskbar. ¥For Macintosh Open the local hard disk that you copied the ELP Link II. When double-click the ELP Link II folder, ELP Link II icon appears on...