Epson Projector Emp 5100 User Manual

33
Changing Menu Settings
Use the remote controlÕs pointing button to select the menu you
want and then press the Click 1 or Click 2 button to display the
submenu.
You can also select a menu using the operation panelÕs the  and
  buttons and then pressing the  button to display
the submenu.
You cannot select video submenus when the input source is a
computer, or computer submenus when the input source is video.
Changing Menu Settings 

343 ¥ Using the Menus
When a submenu is displayed on the screen, use the pointing button
or the  and  button to select the menu item you want.
Next, use the pointing button or the  and  buttons to
make adjustments to the settings of the item.
To return to the main menu from the submenu, select the Return
item in the submenu and then press a Click button or the 
button.
You may also close the menu by pressing the Menu button.
The following describes the items you may set in the submenus. 

35
Video Menu (Computer)
With the Computer Menu allows you to may adjust settings related
to computer video signals and the wireless mouse.
POSITION
Select this item and then press a Click button or the  button
to enter the screen position adjustment mode. While in the screen
position adjustment mode, use the pointing button or the ,
,  and  buttons to move the screen position in
the corresponding direction.
After you are finished, press a Click button or the  button to
retur n to the Computer Menu....

363 ¥ Using the Menus
COLOR
Adjusts the color balance of the input source.
Select this item and then press a Click button or the  button
to enter the color adjustment mode. While in the color adjustment
mode, use the pointing button or the  and  button to
select a color. Next, use the pointing button or  and 
buttons to adjust the selected color. Increasing a colorÕs setting makes
that color more intense on the screen, while a lower setting makes the
color less intense.
After you are finished, press a...

37
If you change your mind, select No and then press a Click button or
the  button to clear the confirmation screen without chang-
ing any settings.
Video Menu (Video)
The Video Menu allows you to make adjustments related to video
signals from video equipment.
BRIGHTNESS
Lightens or darkens the overall image. Increase brightness to make
the image lighter, or decrease it to make the image darker.
CONTRAST
Adjusts the relative difference between light and dark areas. Increase
contrast to make light areas...

383 ¥ Using the Menus
VIDEO RESET
Returns all Video Menu items to their factor y defaults.
Select this item and then press a Click button or the  button
to display the confirmation screen.
Next, select Yes and then press a Click button or the  button
to reset the Video Menu items.
If you change your mind, select No and then press a Click button or
the  button to clear the confirmation screen without chang-
ing any settings.
Audio Menu
The Audio Menu allows you to make adjustments related to audio....

39
SOUND RESET
Returns all Audio Menu items to their factory defaults.
Select this item and then press a Click button or the  button
to display the confirmation screen.
Next, select Yes and then press a Click button or the  button
to reset the Audio Menu items.
If you change your mind, select No and then press a Click button or
the  button to clear the confirmation screen without chang-
ing any settings.
Option Menu
The Option Menu allows you to create basic settings that normally
do not need changing....

403 ¥ Using the Menus
Press a Click button or the  button to clear the setting screen
and retur n to the Option Menu.
REAR PROJ.
Mirrors the projected images horizontally (left-right). Selecting ON
turns mirroring on, while OFF turns it of f (for a normal image). Turn
this option on when projecting from behind onto a transparent
screen being viewed from the opposite side.
CEILING
Mirrors the projected images vertically (top-bottom) and horizontally
(left-right). Selecting ON turns mir roring on, while...

41
LANGUAGE
Selects the menu language in the sequence: Japanese, English,
German, French, Italian, Spanish and Portuguese.
LAMP
Displays the number of hours the current projector lamp has been
used. The color of this display turns r ed when the projector lamp is
near the end of its normal life. When this happens, replace the
projector lamp with a new one as soon as possible.
Changing Menu Settings 

423 ¥ Using the Menus
Using Custom Functions
You can use the Custom Menu to assign the Zoom, Preview or
Strobe function to the remote controlÕs Custom button.
You can assign the following functions:
1. Zoom
Zooms in or out on the center of the displayed image.
2. Preview
Displays the projection images currently being entered by each of
the input sources. The screen is divided into four quadrants.
3. Strobe
Displays images on the screen in sequence. You can preset the
number of images to be displayed and...