Epson Projector EH TW9300 User Manual

Using the Projector on a Network
70
d
Select Basic, and then set the following as necessary.
•Projector Name: Enter a name up to 16 alphanumeric characters long to identify the projector over the
network.
•PJLink Password: Set a password to use when you control the projector using compatible PJLink software.
You can enter up to 32 single-byte alphanumeric characters.
•Remote Password: Set a password to use when you operate the projector from a smartphone or a tablet. You
can enter up to single-byte 8...

Using the Projector on a Network
71
h
Assign an IP address to the projector as necessary.
•If your network uses DHCP, select IP Settings to set the DHCP setting to On.
•If you are not using DHCP, select IP Settings to set the DHCP setting to Off, and then enter the projector's IP
Address, Subnet Mask, and Gateway Address.
i
When you have finished selecting settings, select Complete and then follow the on-screen
instructions to save your settings and exit the menus.
j
Press the  button on the remote...

Using the Projector on a Network
72
b
When connecting in Advanced connection mode, make sure AirPort is turned on and select
the network name (SSID) of the network the projector is connecting to.
Setting Up Wireless Network Security
You can set up security for your projector to use on a wireless network. Set up one of the following security
options to match the settings used on your network:
•WPA2 security
•WPA/WPA2 security
a
Press the  button to display menus in the order Network - Network...

Using the Projector on a Network
73
d
Use the  buttons to select Text & QR Code, and then press the  button.
e
Press the  button on the remote control or select Display the QR Code in the
projector's Network menu to display the QR code.
c
•If you press the  button, you can also display the QR code from the Home screen. s  p.26
•If the projector is already receiving an image signal over the network, the QR code is not
displayed even if you press the 
 button. Select Display the QR Code from the...

Using the Projector on a Network
74
c
When Remote Password is set, you need to enter the password. Once the password has been
recognized, you do not need to enter it from the second time.
Button Function
aDisplays the menu. 
bTurns the projector on or off. 
cChanges to the image from each input port. s  p.26
dSets the image quality using the on-screen instructions.
eSaves, loads, erases, or rename a memory. s  p.41
fTurns HDMI Link on or off. s  p.63
gWhen HDMI Link is On, you can perform operations such...

Using the Projector on a Network
75
Button Function
nOpens the touch pad screen.
You can operate the Configuration menu by touching your touch
pad.
oSelects the projector you want to control. 

Configuration Menu
76
Configuration Menu Functions
Configuration Menu Operations
On the Configuration menu, you can make adjustments and settings for Signal, Image, Input Signal, and so on.
a
Press the  button.
Remote control Control panel
The Configuration menu is displayed.
b
Use the  buttons to
select the top menu on the left, and
then press the 
 button to confirm
the selection.
When you select the top menu on the left,
the sub menu on the right changes.
The line at the bottom is a guide for...

Configuration Menu
77
c
For items adjusted using an adjustment bar, such as the brightness level, you can press the 
button while the adjustment screen is displayed to return the adjustment value to its default value.
Configuration Menu Table
If there is no image signal being input, you cannot adjust items related to the Image or Signal in the
Configuration menu. Note that the items displayed for the Image, Signal, and Info vary depending on the
image signal being projected.
Image menu
Function...

Configuration Menu
78
Function Menu/Settings Explanation
Advanced
Gamma 2, 1, 0, -1, -2, Custom-
ized
*3, ResetPerforms gamma adjustments. You can
select a raw value or adjust using a custom
value. 
s  p.39
RGBCMY R/G/B/C/M/Y Hue, Satura-
tion, Bright-
nessAdjusts the hue, saturation, and bright-
ness for each R, G, B, C, M, and Y color.
s  p.37
Deinterlacing Off, Video, Film/Auto
(This can only be set when Image Pro‐
cessing is set to Fine or when receiving
480i, 576i, or 1080i signal input from the...

Configuration Menu
79
Function Menu/Settings Explanation
3D Setup
*13D Display Auto, 3D, 2D
To view 3D images, set this to Auto or 3D.
s  p.43
3D Format Side by Side, Top
and BottomSets the 3D format for the input signal.
2D-to-3D Conver-
sionOff, Weak, Medium,
StrongConverts 2D images to 3D images.
3D Depth -10 - 10 Sets the depth for the 3D image.
Diagonal Screen
Size60 - 300 Sets the projection size for the 3D image. By
matching this to the actual size, you can achieve
the optimum 3D effect.
3D...