Epson Projector EH TW9300 User Manual

Useful Functions
60
Operating the Remote Control
Name Function
aTurns the power for the WirelessHD Transmitter on or off.
bSwitches the output image between a monitor device, such as a television, connected to
the HDMI Out port on the WirelessHD Transmitter and the projector. 
s  p.61
cSwitches the image source for the AV device connected to the WirelessHD Transmitter.
s  p.62
c
Point the remote control towards the WirelessHD Transmitter.
Remote Control Operating Range
The following shows the operating...

Useful Functions
61
Switching the target image
You can switch between a monitor device, such as a television, connected to the HDMI Out port on the
WirelessHD Transmitter and the projector.
a
Turn on the projector or the monitor device, such as a television.
b
Turn on the WirelessHD Transmitter.
The On/Standby indicator on the WirelessHD Transmitter turns on.
c
Point the remote control at the WirelessHD Transmitter, and then press the  button
on the remote control or the 
 button on the WirelessHD...

Useful Functions
62
c
You can switch to the other monitor device even when the projector is off.
Switching the image source
Use the  button on the remote control to switch the image source for the AV device connected to the
WirelessHD Transmitter. 

Useful Functions
63
Using the HDMI Link Function
HDMI Link Function
When an AV device that meets the HDMI CEC standards is connected to the projector's HDMI port, you can
perform linked operations such as linked power on and volume adjustment for the AV system from one
remote control. Also, when projecting images in WirelessHD, you can use the HDMI link function (EH-
TW9300W/EH-TW8300W only).
c
•As long as the AV device meets the HDMI CEC standards, you can use the HDMI link function even if
the AV...

Useful Functions
64
Function Explanation
Power Off Link
When Power Off Link is set to On, when the projector is turned off, the connected
devices are also turned off.
•This only works when the connected device's CEC power link function is enabled.
•Note that depending on the status of the connected device (for example, if it is record-
ing), the device may not power off.
Link Buffer If HDMI Link is not working correctly, you may be able to improve it by changing the
settings.
*EH-TW9300W/EH-TW8300W...

Useful Functions
65
Projecting Two Different Images Using Picture
in Picture
Types of Screen that can be Displayed Simultaneously
Two different image sources can be projected, one in the main
screen (large screen) and the other in the sub screen (small screen).
You can view the sub screen while viewing the main screen.
Combinations of input sources for Picture in Picture projection
HDMI1 HDMI2 WirelessHD*PC LAN
HDMI1
---
HDMI2---
WirelessHD*---
PC-- - --
LAN-- - --
*EH-TW9300W/EH-TW8300W only.
Projecting...

Useful Functions
66
Changing the Picture in Picture settings
Use the Picture in Picture menu to change the size or position of the sub screen.
a
Press the  button on the remote
control while the projector is
projecting.
The Picture in Picture menu is displayed.
b
Make settings for each of the
displayed functions.
Available functions on the Picture in Picture menu
Function Explanation
Subscreen Size
Selects the sub screen size using Small and Large.
Subscreen Position
Changes the sub screen position using...

Using the Projector on a Network
67
Projecting Using Wired LAN
You can send images to your projector through a wired network.
To do this, connect the projector to your network, and then set up your projector and computer for network
projection.
When using EasyMP Multi PC Projection, you can display up to four separate screens from the projector from
up to 50 computers connected to the network. 
Download EasyMP Multi PC Projection from the following Web site.
http://www.epson.com
Selecting Wired Network...

Using the Projector on a Network
68
d
Select the basic options as necessary.
•If your network uses DHCP, set DHCP to On.
•If you are not using DHCP, set DHCP to Off, and then enter the projector's IP Address, Subnet Mask, and
Gateway Address.
e
When you have finished making settings, select Complete and follow the on-screen
instructions to save your settings and exit the menus.
f
Press the  button on the remote control.
The settings are complete when you see the correct IP address on the LAN standby...

Using the Projector on a Network
69
Projecting Using Wireless LAN
You can project images from smartphones, tablets, and computers over wireless LAN.
To project over wireless LAN, you need to make wireless network settings for the projector and the connected
device in advance.
You can use one of the following methods to project over wireless LAN.
•When using EasyMP Multi PC Projection, you can display up to four separate screens from the projector from up to
50 computers connected to the network....