Epson Projector EH TW9300 User Manual

Adjusting the Image
40
a
Press the  button to display
menus in the following order.
Image - Advanced - Gamma -
Customized - Adjust it from the
image
b
Move the cursor on the projected
image to the part where you want to
change the brightness, and then press
the 
 button.
c
Use the  buttons for
adjustments, and then press the 
button to confirm the selection.
d
When Do you want to continue
adjusting the setting? is displayed,
select Yes or No.
To adjust another location, select Yes, and
repeat the...

Adjusting the Image
41
Viewing the Image at the Saved Image Quality
(Memory Function)
Saving a Memory
By using the memory function, you can register the following adjustment values, and then load them when
necessary.
•Image setting from the Configuration menu
•Lens Adjustment Function (Focus, Zoom, Lens Shift) adjustment values s  p.28
a
Make the settings or adjustments you
want to register.
b
Press the  button.
c
Use the  buttons to
select Save Memory or Save Lens
Position, and then press the 
button to...

Adjusting the Image
42
Function Explanation
Load Memory
Loads the saved memory. When you select a memory and press the 
button, the settings applied to the current image are replaced with the
settings from the memory.
Erase MemoryErases the registered memory. When you select a memory name and press
the 
 button, a message is displayed. Select Yes, and then press the
 button to erase the selected memory.
Rename MemoryChanges the memory name. Select the memory name you want to
change, and then press the...

Useful Functions
43
Enjoying 3D Images
Preparing to View 3D Images
Check the following before viewing 3D images.
•When the source is HDMI1, HDMI2, or WirelessHD (EH-TW9300W/EH-TW8300W only).
•Set 3D Display to Auto or 3D.
When this is set to 2D, change to Auto or 3D. 
s Signal - 3D Setup - 3D Display  p.78
•Pair 3D Glasses. s  p.45
This projector supports the following 3D formats.
•Frame Packing
•Side by Side
•Top and Bottom
If the 3D image cannot be viewed
The projector automatically projects a 3D image...

Useful Functions
44
Using 3D Glasses
Use the supplied or optional 3D Glasses (ELPGS03) to view 3D images. s  p.117
c
The 3D Glasses come with protective stickers. Remove the protective stickers before use.
Charging the 3D Glasses
The following charging methods are available, depending on the model of 3D Glasses being used.
If you have a WirelessHD Transmitter, you can use it to charge the glasses.
If you do not have a WirelessHD Transmitter, you can charge by using a USB Charging Adapter (ELPAC01)....

Useful Functions
45
Attention
•Only connect to an electrical outlet that uses the voltage displayed on the adapter.
•Note the following points when handling the USB cable.
- You should not bend, twist, or pull the cable with too much force.
- You should not modify the cable.
- You should not perform wiring near an electric heater.
- You should not use the cable if it is damaged.
Pairing 3D Glasses
To view 3D images, you first need to pair the 3D Glasses with the projector.
Press the [Pairing] button for...

Useful Functions
46
Indicators Status
Flashing red quickly twice; repeated 5
timesWeak battery
Lit red Charging
Lit green Charging completed
Flashes green and red in turn Pairing
Lit green for 10 seconds and then turns
offPower on or pairing succeeded
Converting 2D Images to 3D
You can convert 2D images from HDMI1, HDMI2, or WirelessHD (EH-TW9300W/EH-TW8300W only) to 3D.
a
Press the  button to display
menus in the order Signal - 3D Setup.
b
Set 3D Display to Auto.
c
Select 2D-to-3D Conversion, and
then...

Useful Functions
47
Warnings Regarding Viewing 3D Images
Note the following important points when viewing 3D images.
Warning
Disassembling or remodeling
•Do not disassemble or remodel the 3D Glasses.
This could cause a fire to occur or the images to appear abnormal when viewing, causing you to feel unwell.
Storage locations
•Do not leave the 3D Glasses or the supplied parts within reach of children.
They could be accidentally swallowed. If anything is accidentally swallowed, contact a doctor...

Useful Functions
48
Caution
Viewing Time
•When viewing 3D images, always take periodic breaks during extended viewing.
Long periods of viewing 3D images may cause eye fatigue.
The amount of time and frequency of such breaks varies from person to person. If your eyes still feel tired or
uncomfortable even after taking a break from viewing, stop viewing immediately.
Caution
Watching 3D Images
•If your eyes feel fatigued or uncomfortable when viewing 3D images, stop viewing immediately.
Continuing to view...

Useful Functions
49
Connecting with WirelessHD (EH-TW9300W/
EH-TW8300W Only)
Installing the WirelessHD Transmitter
You can use the supplied WirelessHD Transmitter to wirelessly receive image and sound data.
This is useful when the projector cannot be setup near your AV devices as you can connect the devices to the
projector without using cables.
You can use the WirelessHD Transmitter in the following ways.
•You can connect up to four AV devices at the same time, and switch images using the remote...