Epson Projector EH-TW5350 User Manual

							Using the Projector on a Network (EH-TW5350 Only)
60
d
Select the Screen Mirroring settings as necessary.
•Display Name: Lets you enter a name up to 32 alphanumeric characters long to identify the projector from a
list of available devices.
•Adjust Image Quality: Lets you adjust the Screen Mirroring speed/quality. Select a small number to improve
the quality and select large number to increase the speed.
e
When you finish selecting settings, select Set and follow the on-screen instructions to save
your settings and exit the menus.
Projecting in Windows 8.1
You can set up your computer for wireless projection from Charms in Windows 8.1. You can play audio through
the projector's speaker system by connecting using Screen Mirroring.
a
Select Screen Mirroring Settings on your projector as necessary.
s  p.59
b
Press the  button on the remote control to switch to the Screen Mirroring source.
You see the Screen Mirroring standby screen.
c
On your computer, select Devices from Charms, and then select Project. 
						

							Using the Projector on a Network (EH-TW5350 Only)
61
d
Select Add a wireless display.
You see a list of available devices.
e
Select the projector's Display Name from the list.
f
If you see the PIN entry screen on your computer, enter the PIN code displayed on the
Screen Mirroring standby screen or at the bottom right of the projected image.
The projector displays the image from your computer.
c
It may take some time until the connection is established. While connecting, do not disconnect
the projector's power cord. Doing so may cause your device to freeze or malfunction.
Projecting Using Intel WiDi Software
If you are using Windows 7 or Windows 8 with the Intel WiDi software installed, you can connect to the
projector wirelessly and project images.
You can play audio through the projector's speaker system by connecting using Screen Mirroring.
a
Select Screen Mirroring Settings on your projector as necessary.
s  p.59
b
Press the  button on the remote control to switch to the Screen Mirroring source.
You see the Screen Mirroring standby screen. 
						

							Using the Projector on a Network (EH-TW5350 Only)
62
c
On your mobile device, start the Intel WiDi software.
You see a list of available devices.
d
Select the projector's Display Name from the list.
e
If you see the PIN entry screen on your mobile device, enter the PIN code displayed on the
Screen Mirroring standby screen or at the bottom right of the projected image.
The projector displays the image from your mobile device.
c
It may take some time until the connection is established. While connecting, do not disconnect
the projector's power cord. Doing so may cause your device to freeze or malfunction.
Projecting Using the Miracast Function
If your mobile device such as a smartphone supports Miracast, you can connect it to the projector wirelessly
and project images.
You can play audio through the projector's speaker system by connecting using Screen Mirroring.
a
Select Screen Mirroring Settings on your projector as necessary.
s  p.59
b
Press the  button on the remote control to switch to the Screen Mirroring source.
You see the Screen Mirroring standby screen.
c
On your mobile device, use your Miracast function to search for the projector.
You see a list of available devices.
d
Select the projector's Display Name from the list. 
						

							Using the Projector on a Network (EH-TW5350 Only)
63
e
If you see the PIN entry screen on your mobile device, enter the PIN code displayed on the
Screen Mirroring standby screen or at the bottom right of the projected image.
The projector displays the image from your mobile device.
c
It may take some time until the connection is established. While connecting, do not disconnect
the projector's power cord. Doing so may cause your device to freeze or malfunction.
Depending on the mobile device, you may need to delete a device when connecting. Follow
the on-screen instructions on your device. 
						

							Configuration Menu
64
Configuration Menu Functions
Configuration Menu Operations
On the Configuration menu, you can make adjustments and settings for Signal, Image, Input Signal, and so on.
a
Press the  button.
Remote control Control panel
The Configuration menu is displayed.
b
Use the  buttons to
select the top menu on the left, and
then press the 
 button to confirm
the selection.
When you select the top menu on the left,
the sub menu on the right changes.
The line at the bottom is a guide for
operations.
c
Use the  buttons to
select the sub menu on the right, and
then press the 
 button to confirm
the selection.
The adjustment screen for the selected
function is displayed.
d
Use the  buttons to
adjust the settings.
Ex.) Adjustment bar
Ex.) Choices
Press the  button on an item displaying
this 
 icon to change to the selection
screen for that item.
Press the 
 button to return to the
previous level.
e
Press the  button to exit the menu. 
						

							Configuration Menu
65
c
For items adjusted using an adjustment bar, such as the brightness level, you can press the 
button while the adjustment screen is displayed to return the adjustment value to its default value.
Configuration Menu Table
If there is no image signal being input, you cannot adjust items related to the Image or Signal in the
Configuration menu. Note that the items displayed for the Image, Signal, and Info vary depending on the
image signal being projected.
Image menu
Function Menu/Settings Explanation
Color Mode
Dynamic, BrightCinema, Natural, Cinema, 3D Dy-
namic, 3D CinemaSelect a color mode based on your sur-
roundings and the image you are projec-
ting. 
s  p.33
BrightnessAdjusts the brightness when the image
appears too dark.
ContrastAdjusts the contrast between light and
shade in the images. By increasing the
contrast, the images become vivid.
Color Satura-
tionAdjusts the color saturation for the im-
ages.
TintAdjusts the tint for the images.
SharpnessAdjusts the image sharpness.  
Color Temp.Color Temp.Adjusts the tint for the images. The image
is tinted blue for high values, and tinted
red for low values.
Customized
Adjusts the offset and gain for each R, G,
and B color.
Frame Interpo-
lation
*1
Off, Weak, Normal, Strong
(This can only be set when Image Pro‐
cessing is set to Fine.)
Adjusts the smoothness of movement of
the image.
Image En-
hancement
*2
Image Preset Mode Off, Preset 1 to Preset 5 Select the settings prepared in advance as
the settings for Noise Reduction, MPEG
Noise Reduction, and Detail Enhance‐
ment.
Noise Reduction
(This can only be set when Image Pro‐
cessing is set to Fine.)
Adjusts the roughness of the image.
MPEG Noise Reduction
Smoothes out rough images in MPEG for-
mat.
Detail Enhancement
Creates a more emphatic texture and ma-
terial feel of the image. 
						

							Configuration Menu
66
Function Menu/Settings Explanation
Advanced
RGBCMY R/G/B/C/M/Y Hue, Satura-
tion, Bright-
nessAdjusts the hue, saturation, and bright-
ness for each R, G, B, C, M, and Y color.
s  p.37
EPSON Super White On, Off (This is only available when receiving sig-
nal input from the HDMI1 or HDMI2 port.)
Set this to On if you are experiencing
bright over exposure of whites in your im-
age. When set to On, HDMI Video Range
settings are disabled.
Power Con-
sumptionNormal, ECO You can set the lamp brightness to one of
two settings.
Select ECO if the images being projected
are too bright. When ECO is selected, pow-
er consumption during projection decrea-
ses, and fan rotation noise is reduced.
Auto IrisOff, Normal, High Speed You can change the luminance adjust-
ment tracking for changes in brightness in
the displayed image. 
s  p.36
ResetYes, No
Resets the adjustment values of Image set
in the current Color Mode to the default
settings.
*1This is only displayed when a Video, HDMI1, or HDMI2 image signal is being input.
*2This is only displayed when a Video, HDMI1, HDMI2, PC, or Screen Mirroring image signal is being input.
Signal menu
The Signal menu cannot be set when a USB or LAN image signal is being input.
Function Menu/Settings Explanation
3D Setup
*13D Display Auto, 3D, 2D
To view 3D images, set this to Auto or 3D.
s  p.42
3D Format Side by Side, Top
and BottomSets the 3D format for the input signal.
2D-to-3D Conver-
sionOff, Weak, Medium,
StrongConverts 2D images to 3D images.
3D Depth -10 - 10 Sets the depth for the 3D image.
Diagonal Screen
Size60 - 300 Sets the projection size for the 3D image. By
matching this to the actual size, you can achieve
the optimum 3D effect.
3D Brightness Low, Medium, High Sets the brightness for the 3D image.
Inverse 3D Glasses Yes, NoReverses the synchronization timing for the left/
right shutters on the 3D Glasses and the left/right
images. Enable this function i f  t h e  3 D  e f f e c t  i s  n o t
displayed correctly.
3D Viewing Notice On, Off Turns the notice that appears when viewing 3D
content on or off.
Aspect*2 *4Auto*1, Normal, Full, Zoom Selects the aspect mode. s  p.34
Tracking*2 *3Varies depending on the input signal. Adjusts computer images when vertical stripes
appear in the images. 
						

							Configuration Menu
67
Function Menu/Settings Explanation
Sync.
*2 *30 - 31 Adjusts computer images when flickering, fuzzi-
ness, or interference appear in the images.
•Adjusting the Brightness, Contrast, or Sharp‐
ness may cause flickering or fuzziness.
•When adjusting Sync. after adjusting the Track‐
ing, you can create a more vivid image.
Position*2 *4   Adjusts the display position up, down, left, and
right when a part of the image is missing so that
the whole image is projected.
Auto Setup*3On, Off Sets whether or not to automatically adjust the
image whenever the input signal is changed.
When enabled, the Tracking, Position, and
Sync. are automatically configured.
Overscan *2Auto *1, Off, 4%, 8% Changes the output image ratio (the range of the
projected image).
•Off, 4%, 8%: Sets the range of the image. Off
projects all ranges. Depending on the image sig-
nal, you may notice noise at the top and bottom
of the image.
•Auto: Automatically sets to Off or 8% depend-
ing on the input signal.
AdvancedHDMI Video
Range
*1 *2
Auto, Normal, Ex-
panded(This can only be set when EPSON Super
White is set to Off.)
When set to Auto, the video level for the DVD
input signal to the HDMI1 or HDMI2 ports is au-
tomatically detected and set.
If you experience under or overexposure when
set to Auto, set the video level of the projector
to match that of the DVD player's video level.
Your DVD player may be set to Normal or Expand.
Image Processing
*1
*4
 *5
Fine, Fast Improves the response speed for images projec-
ted at high-speed, such as games.
ResetYes, No
Resets all Signal settings except for Diagonal
Screen Size, 3D Viewing Notice, and Aspect.
*1This is only displayed when a HDMI1 or HDMI2 image signal is being input.
*2Settings are saved for each type of input source or signal.
*3This is only displayed when a PC image signal is being input.
*4This is only displayed when a PC or Video image signal is being input.
*5This is only displayed when a Screen Mirroring image signal is being input. 
						

							Configuration Menu
68
Settings menu
Function Menu/Settings Explanation
Keystone
V-Keystone -60 - 60 Corrects vertical distortion in an im-
age. 
s  p.31
H-Keystone -60 - 60 Corrects horizontal distortion in an
image. 
s  p.31
Auto V-Keystone
(EH-TW5350/EH-
TW5300 only)On, Off
Enables or disables Auto V-Key‐
stone. 
s  p.30
H-Keystone Adjuster On, Off
Enables or disables H-Keystone
Adjuster. 
s  p.31
Split Screen
(EH-TW5350 on-
ly)- The screen is split in two, and im-
ages from the HDMI source and the
Screen Mirroring source are dis-
played.
Volume0 - 20 Adjusts the volume.
HDMI LinkDevice Connections - Displays a list of devices connected
to the HDMI1 or HDMI2 ports.
HDMI Link On, Off Enables or disables the HDMI Link
function.
Audio Out Device Projector, AV System When an AV system is connected,
you can set whether to output audio
from the projector's speaker, or
from the AV system's speaker.
Power On Link Off, Bidirectional, Device -> PJ,
PJ -> DeviceSets the link function when the
power is turned on.
•When linking operations to the
connected device and turning on
the projector, select Bidirectional
or Device -> PJ.
•When linking power on for the pro-
jector to the connected device, se-
lect Bidirectional or PJ -> Device.
Power Off Link On, Off Sets whether or not to power off
connected devices when the pro-
jector is turned off.
Bluetooth*Search Bluetooth De-
vice- Searches for available Bluetooth de-
vices and displays them as a list.
Bluetooth Audio On, Off Enables or disables audio output
from Bluetooth audio devices.
Setup cannot be performed in the
following cases.
•When the source is LAN
•When Audio Out Device is set to
AV System from the HDMI Link
menu 
						

							Configuration Menu
69
Function Menu/Settings Explanation
Lock Setting
Child Lock On, Off
This locks the  button on the
projector's control panel to prevent
children from turning on the pro-
jector by accident. You can turn on
the power when locked by holding
down the 
 button for approxi-
mately three seconds. You can still
turn off the device using the 
button, or perform operations with
the remote control as usual.
If changed, this setting is enabled
after you power off the projector
and the cool-down process is com-
plete.
Note that even if Child Lock is set to
On, the projector still turns on when
the power cord is connected if Di‐
rect Power On is set to On.
Control Panel Lock Full Lock, Partial Lock, Off
Full Lock: Disables all of the projec-
tor's buttons.
Partial Lock: Disables all of the pro-
jector's buttons except for the 
button.
 is displayed on the screen if but-
tons are pressed while the projector
is locked. To unlock, press and hold
the 
 button on the control panel
for at least 7 seconds.
If changed, this setting is enabled
once you close the Configuration
menu.
User ButtonFine/Fast, 2D-to-3D Conversion, Power Consumption,
Info, Display the QR Code (EH-TW5350 only)Select a Configuration menu item to
assign to the 
 button on the re-
mote control. By pressing the 
button, the assigned menu item se-
lection/adjustment screen is dis-
played, allowing you to make one-
touch settings/adjustments.
MemoryLoad Memory Memory1 to Memory10 Loads the settings saved in Save
Memory to adjust the image.
Save Memory Memory1 to Memory10
Saves the settings made in Image to
a memory.
Erase Memory Memory1 to Memory10 Erases a saved memory.
Rename Memory Memory1 to Memory10, De-
fault, DVD, VCR, SDTV, HDTV,
Cinema, Sports, Music, Anime,
Game, CustomizedChanges the saved memory name.
ResetYes, No
Resets all Settings except for Audio
Out Device, Power On Link, Power
Off Link, User Button, and Memo‐
ry.