Epson Projector EH-TW5350 User Manual

							Introduction
10
Buttons/Indicators Function
h•Adjusts the volume.
You cannot control the volume for Bluetooth audio devices.
•Selects menu items or adjustment values while displaying the projector's menu.
s  p.32
•Performs horizontal keystone correction when the Keystone screen is displayed.
s  p.31
i•Adjusts keystone distortion in projected images.
•Selects menu items or adjustment values while displaying the projector's menu.
s  p.31
jReturn to the previous menu level when a menu is displayed. s  p.64
kSelects functions and settings when a menu is displayed. s  p.64
lDisplays and closes the Configuration menu.
On the Configuration menu, you can make adjustments and settings for Sig-
nal, Image, Input Signal, and so on. 
s  p.64
mDisplays and closes the Home screen. s  p.27 
						

							Introduction
11
Remote Control
Button Function
aTurns the projector on or off. s  p.26
bChanges to the image from each input port.
s  p.26
If you press the 
 button when using EH-
TW5350, the source switches between LAN and
Screen Mirroring.
c•When HDMI Link is On
Displays the device connections list.
Press other buttons to control playback, stop, or
adjust the volume of connected devices com-
patible with the HDMI CEC or MHL standards.
s  p.48
•When HDMI Link is Off
Displays the HDMI Link settings menu.
dDisplays and closes the Configuration menu.
On the Configuration menu, you can make ad-
justments and settings for Signal, Image, Input
Signal, and so on. 
s  p.64
eSelects menu items and adjustment values.
s  p.64
fPerforms the function assigned to the User But‐
ton. 
s  p.68
gChanges the Color Mode. s  p.33
hChanges the 3D Display to Auto, 3D, or 2D.
s  p.45
iChanges the 3D format. s  p.42
jChanges to the image from the USB port.
s  p.50
kDisplays the Image Enhancement menu.
s  p.35
lDisplays and closes the test pattern. s  p.29
mDisplays and closes the Home screen.
s  p.27 
						

							Introduction
12
Button Function
nTurns the video and audio on or off temporarily.
s  p.32
oSets the strength for Frame Interpolation.
s  p.36
pRegisters and loads a memory. s  p.39
qThe adjustment value returns to its default value
when pressed while the menu's adjustment
screen is displayed. 
s  p.64
rWhen a menu is displayed, it accepts and enters
the current selection and moves to the next lev-
el. 
s  p.64
sReturns to the previous menu level when a menu
is displayed. 
s  p.64
tAdjusts the volume. s  p.32
You cannot control the volume for Bluetooth
audio devices.
ATemporarily mutes or plays the audio.
s  p.32 
						

							Introduction
13
Rear
Name Function
aPower inletConnect the power cord. s  p.26
bSpeakerThe projector's built-in speaker. Outputs audio.
cRemote receiverReceives signals from the remote control. s  p.25
dAudio Out portOutputs audio during playback to the external speakers. s  p.21
eAudio (L-R) portInputs audio from equipment connected to the Video port or the PC port.
s  p.19
fHDMI2 portConnects HDMI compatible video equipment and computers. s  p.19
gHDMI1/MHL portConnects HDMI compatible video equipment and computers. s  p.19
Also, connects MHL compatible smartphones and tablets. 
s  p.20
hVideo portConnects to the composite video output port on video equipment.
s  p.19
iPC portConnects to the RGB output port on a computer. s  p.19
jService portService port. This is not normally used.
kUSB portConnects USB devices such as a USB memory device or a digital camera, and
projects images as a slideshow. 
s  p.20
Base 
						

							Introduction
14
Name Function
aCeiling mount fixing
points (three points)Attaches the optional ceiling mount here when suspending the projector from a
ceiling. 
s  p.95
bSecurity cable fittingThread a commercially available theft-prevention wire lock through this opening
to secure and lock the projector. 
cRear footWhen set up on a surface such as a table, extend the foot to adjust horizontal tilt.
s  p.30
dFront adjustable footWhen set up on a surface such as a table, extend the foot to adjust the height of
the image. 
s  p.29 
						

							Preparing
15
Installing
Projected Image and Position of Projector
Install the projector as follows.
Installing in parallel with the screen
If the projector is installed at an angle to the screen, keystone distortion occurs in the projected image.
Adjust the projector's position so that it is installed in parallel with the screen.
c
If you cannot install the projector parallel to the screen, correct keystone distortion using the
horizontal keystone adjuster or H/V-Keystone correction. 
s  p.30
Installing the projector horizontally by adjusting the height of either side
If the projector is tilted, the projected image is also tilted.
Install the projector horizontally so that both sides are at the same height.
If the projector cannot be installed horizontally, you can adjust the projector's tilt with the rear foot. 
s  p.30 
						

							Preparing
16
Various Setting Methods
Warning
•A special method of installation is required when suspending the projector from a ceiling (ceiling mount). If
it is not installed correctly, it could fall causing an accident and injury.
•If you use adhesives, lubricants, or oil on the ceiling mount fixing points to prevent screws from loosening,
or if you use things such as lubricants or oils on the projector, the projector case may crack causing it to fall
from its ceiling mount. This could cause serious injury to anyone under the projector and also damage the
projector.
•Do not install it on an unstable shelf or in a place out of load range. Otherwise, it could fall or topple causing
an accident and injury.
•When installing it in a high position such as on a shelf, take measures against falling by using wires to ensure
the safety in an emergency, such as an earthquake, and prevent accidents. If it is not installed correctly, it
could fall causing an accident and injury.
•Do not block the air intake vent and air exhaust vent of the projector. Blocking its air intake vent and air
exhaust vent may trap heat inside causing fire.
Attention
•Try not to setup the projector in locations subject to high humidity and dust, or in locations subject to smoke
from fires or tobacco smoke.
•Do not use the projector installed vertically. Doing so could cause a malfunction.
•Clean the air filter once every three months. Clean it more often if the environment is particularly dusty.
s  p.90
Placing on a table and projecting
You can install the projector on a table in your living room or on a low shelf to project images.
Suspending from the ceiling and projecting
You can suspend the projector from the ceiling with the optional ceiling mount to project images. 
						

							Preparing
17
c
When suspending from the ceiling and projecting, set Projection to Front/Ceiling or Rear/
Ceiling. 
s Extended - Projection  p.70
Adjusting the Projection Size
The size of the projection increases as the projector is moved away from the screen.
Use the table below to setup the projector at the optimum position from the screen. The values given here
are for your reference only.
c
The projected image becomes smaller after correcting distortion. Increase the projection distance
to fit the projected image to the screen size.
B Distance from the center of the lens to the base of the projected image
D The center of the lens
Unit: cm
16:9 Screen Size Projection Distance (C)Distance (B)
A W x H Minimum (Wide) Maximum (Tele)
30" 66 x 37 80 96 -3
40" 89 x 50 107 129 -5
50" 111 x 62 135 162 -6
60" 133 x 75 162 195 -7
80" 177 x 100 217 261 -9
100" 221 x 125 272 327 -11
150" 332 x 187 410 492 -17
200" 443 x 249 547 658 -23
250" 553 x 311 685 823 -28 
						

							Preparing
18
16:9 Screen Size Projection Distance (C)Distance (B)
A W x H Minimum (Wide) Maximum (Tele)
300" 664 x 374 823 988 -34 
						

							Preparing
19
Connecting a Device
Attention
•Make cable connections before connecting to a power outlet.
•Check the shape of the cable's connector and the shape of the port, and then connect. If you force a connector
of a different shape into the port, it could cause damage and a malfunction to occur.
Connecting Video Equipment
To project images from DVD players or VHS video and so on, connect to the projector using one of the
following methods.
When using a commercially available HDMI cable
When using a commercially available video cable
c
•The cable differs depending on the output signal from the connected video equipment.
•Some types of video equipment are capable of outputting different types of signals. Check the user's
guide supplied with the video equipment to confirm what type of signals can be output.
•If audio is not output correctly, check the settings in Audio Out Device. s Settings - HDMI Link -
Audio Out Device  p.68
Connecting a Computer
To project images from a computer, connect the computer using one of the following methods.
When using a commercially available computer cable