Epson Projector Eb 825 User Manual

Removing  USB  Devices
After  finishing  projecting,  follow  the  procedure  below  to  remove  USB
devices  from  the  projector.ProcedureRemove  the  optional  Document  Camera  from  the  projector's  USB
Port  (TypeA).
For  digital  cameras,  hard  disks,  and  so  on,  turn  off  the  power  to  the
device  and  then  remove.
Connecting and Removing USB Devices (EB-826W/825/824/85 only)
81 

By  using  the  supplied  USB  cable  to  connect  the  projector  to  a  Windows
computer  you  can  project  images  from  the  computer.This  function  is
called  USB  Display.  Simply  by  connecting  via  a  USB  cable,  images  from
the  computer  can  be  displayed.
Connecting
ProcedureA
Turn  the  computer  on.
B
Connect  to  the  power  cable  (supplied).
C
Turn  the  computer  on.
D
Open  the  A/V  mute  slide  knob.
E
Connect  to  the  USB  cable.
When  audio  is  output  from  the...

Connecting  for  the  first  time
ProcedureA
Driver  installation  starts  automatically.
When  you  are  using  a  Windows  2000  computer,  click  Computer  -
All  Programs  -  EPSON  Projector  -  EPSON  USB  Display  -  EPSON
USB  Display  Vx.x.When  using  a  computer  running  Windows  2000  under  user
authority,  a  Windows  error  message  is  displayed  during
installation  and  you  may  not  be  able  to  install  the  software.  In
this  case,  try  updating  Windows  to  the  latest...

C
Computer  images  are  projected.
It  may  take  a  while  before  computer  images  are  projected.  Until
computer  images  are  projected,  leave  the  equipment  as  it  is  and
do  not  disconnect  the  USB  cable  or  turn  off  the  power  to  the
projector.
q
•If  nothing  is  projected  for  some  reason,  click  All  Programs -
EPSON  Projector - EPSON USB  Display - EPSON USB
Display Vx.x,  on  your  computer.
•If  it  is  not  installed  automatically,  double-click  My  Computer -...

Connect  with  a  commercially  available  100BASE-TX  or  10BASE-T  LAN
cable.  Depending  on  the  model,  the  following  diagrams  and  interfaces
may  differ.
A
To LAN port
B
LAN cable (commercially available)
C
To LAN port
AttentionTo  prevent  malfunctions,  use  a  category  5  shielded  LAN  cable.
Connecting a LAN Cable (EB-826W/825/85/84 only)
85 

ProcedureA
Open  the  air  filter  cover.
Slide  the  air  filter  cover  open/close  switch,  and  open  the  air  filter
cover.
B
Install  the  Wireless  LAN  unit.
C
Secure  the  Wireless  LAN  unit  using  the  screw  included  to
avoid  losing  the  unit.A
Screw hole to fix wireless LAN unit
Installing the Wireless LAN Unit (EB-826W/825/85 only)
86 

Connecting  to  an  external  monitor  (EB-826W/
825/85/84  only)
You  can  display  computer  images  input  from  Computer1/2  Input  Port
on  an  external  monitor  and  the  screen  connected  to  the  projector  at
the  same  time.  This  means  that  you  can  check  projected  images  on  an
external  monitor  when  giving  presentations  even  if  you  cannot  see  the
screen. Connect using the cable supplied  with  the  external  monitor.
A
To Monitor port
B
Cable supplied with monitor
C
To...

Connecting  to  an  external  speaker  (EB-826W/
825/85/84  only)
You  can  connect  speakers  with  built-in  amplifiers  to  the  projector's
Audio  Out  port  to  enjoy  a  fuller  quality  of  sound.  Connect  with  a
commercially  available  audio  cable  (such  as  pin  plug  
W
 3.5  mm  stereo
mini  plug).  Use  an  audio  cable  compatible  with  the  connector  on  the
external  speakers.
A
To external audio equipment
B
Audio cable (commercially available)
C
To Audio Out Port
q
•When  the...

When  the  Mail  Notification  function  is  set  to  On and  a  problem/
warning  occurs  in  the  projector,  the  following  e-mail  will  be  sent.
Subject:  EPSON  Projector
Line  1:  The  Projector  Name  where  the  problem  has  occurred
Line  2:  The  IP  Address  set  for  the  projector  where  the  problem  has
occurred.
Line  3  and  on:  Details  of  the  problem
The  details  of  the  problem  are  listed  line  by  line.  The  following  table
shows  the  details  that  are  given  in...

Command  List
When  the  power  ON  command  is  transmitted  to  the  projector,  the
power  turns  on  and  it  enters  warm-up  mode.  When  the  projector's
power  has  turned  on,  a  colon  ":" (3Ah)  is  returned.
When  a  command  is  input,  the  projector  executes  the  command  and
returns  a  ":",  and  then  accepts  the  next  command.
If  the  command  being  processed  terminates  abnormally,  an  error
message  is  output  and  a  ":"  is  returned.
Item...