Epson Projector Eb 825 User Manual
Have a look at the manual Epson Projector Eb 825 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Removing USB Devices After finishing projecting, follow the procedure below to remove USB devices from the projector.ProcedureRemove the optional Document Camera from the projector's USB Port (TypeA). For digital cameras, hard disks, and so on, turn off the power to the device and then remove. Connecting and Removing USB Devices (EB-826W/825/824/85 only) 81
By using the supplied USB cable to connect the projector to a Windows computer you can project images from the computer.This function is called USB Display. Simply by connecting via a USB cable, images from the computer can be displayed. Connecting ProcedureA Turn the computer on. B Connect to the power cable (supplied). C Turn the computer on. D Open the A/V mute slide knob. E Connect to the USB cable. When audio is output from the projector's speaker, connect an audio cable (commercially available) to the Audio2 Port.s "Connecting for the first time" p.83 s "From the second time" p.84 AttentionConnect the projector directly to the computer and not via a USB hub. Connecting with a USB cable and Projecting (USB Display) 82
Connecting for the first time ProcedureA Driver installation starts automatically. When you are using a Windows 2000 computer, click Computer - All Programs - EPSON Projector - EPSON USB Display - EPSON USB Display Vx.x.When using a computer running Windows 2000 under user authority, a Windows error message is displayed during installation and you may not be able to install the software. In this case, try updating Windows to the latest version, restart, and then try to connect again. For more details, contact the nearest address provided in the Support and Service Guide. s Epson Projector Contact List B Click "Agree". If the driver is not installed, you cannot start USB Display. Select Agree to install the driver. If you want to cancel installation, click Disagree. Connecting with a USB cable and Projecting (USB Display) 83
C Computer images are projected. It may take a while before computer images are projected. Until computer images are projected, leave the equipment as it is and do not disconnect the USB cable or turn off the power to the projector. q •If nothing is projected for some reason, click All Programs - EPSON Projector - EPSON USB Display - EPSON USB Display Vx.x, on your computer. •If it is not installed automatically, double-click My Computer - EPSON_PJ_UD - EMP_UDSE.EXE, on your computer. •If the mouse pointer flickers on the computer screen, click All Programs - EPSON Projector - EPSON USB Display - EPSON USB Display Vx.x, and then clear the Transfer layered window checkbox. •To uninstall the driver, open Control Panel - Add/Remove Programs - and uninstall EPSON USB Display Vx.x. •Disconnecting The projector can be disconnected simply by disconnecting the USB cable. There is no need to use the Safely Remove Hardware feature in Windows. From the second time Computer images are projected. It may take a while before computer images are projected. Please wait.q Applications that use part of DirectX functions may not be displayed correctly. (Windows only) Connecting with a USB cable and Projecting (USB Display) 84
Connect with a commercially available 100BASE-TX or 10BASE-T LAN cable. Depending on the model, the following diagrams and interfaces may differ. A To LAN port B LAN cable (commercially available) C To LAN port AttentionTo prevent malfunctions, use a category 5 shielded LAN cable. Connecting a LAN Cable (EB-826W/825/85/84 only) 85
ProcedureA Open the air filter cover. Slide the air filter cover open/close switch, and open the air filter cover. B Install the Wireless LAN unit. C Secure the Wireless LAN unit using the screw included to avoid losing the unit.A Screw hole to fix wireless LAN unit Installing the Wireless LAN Unit (EB-826W/825/85 only) 86
Connecting to an external monitor (EB-826W/ 825/85/84 only) You can display computer images input from Computer1/2 Input Port on an external monitor and the screen connected to the projector at the same time. This means that you can check projected images on an external monitor when giving presentations even if you cannot see the screen. Connect using the cable supplied with the external monitor. A To Monitor port B Cable supplied with monitor C To Monitor Out Port q •You cannot display images from equipment connected to the Component Video signal, Video input port, or S-Video input port on the external monitor. •Setting gauges, Configuration Menu, or Help screens for functions such as Keystone are not output to the external monitor. Connecting to External Equipment 87
Connecting to an external speaker (EB-826W/ 825/85/84 only) You can connect speakers with built-in amplifiers to the projector's Audio Out port to enjoy a fuller quality of sound. Connect with a commercially available audio cable (such as pin plug W 3.5 mm stereo mini plug). Use an audio cable compatible with the connector on the external speakers. A To external audio equipment B Audio cable (commercially available) C To Audio Out Port q •When the audio cable jack is inserted into the Audio Out Port, audio stops being output from the projector's built-in speakers and switches to external output. •When using a commercially available 2RCA(L/R)/stereo mini-pin audio cable, make sure it is labeled "No resistance". Connecting a microphone You can output microphone audio from the projector's speaker by connecting a dynamic mic to the projector's Mic Input Port. The projector does not support plug-in-power. A To Mic Input Port Connecting to External Equipment 88
When the Mail Notification function is set to On and a problem/ warning occurs in the projector, the following e-mail will be sent. Subject: EPSON Projector Line 1: The Projector Name where the problem has occurred Line 2: The IP Address set for the projector where the problem has occurred. Line 3 and on: Details of the problem The details of the problem are listed line by line. The following table shows the details that are given in the message for each item. To deal with problems/warnings, see "Reading the Indicators". s p.55 Message Cause Internal errorInternal Error Fan related errorFan Error Sensor errorSensor Error Lamp cover is open.Lamp Cover Open Lamp timer failureLamp Failure Lamp outLamp Error Internal temperature errorHigh Temp Error (Overheating) High-speed cooling in progressHigh Temp Warning Lamp replacement notificationReplace Lamp No-signalNo Signal No Signal is input to the projector. Check the connection status or check that the power for the signal source is turned on. Auto Iris ErrorAuto Iris Error Message Cause Power Err. (Ballast)Power Err. (Ballast) A (+) or (-) appears at the start of the message. (+): A projector problem has occurred (-): A projector problem has been dealt with Reading Problem Mail Notification Function (EB-826W/825/85/84 only) 89
Command List When the power ON command is transmitted to the projector, the power turns on and it enters warm-up mode. When the projector's power has turned on, a colon ":" (3Ah) is returned. When a command is input, the projector executes the command and returns a ":", and then accepts the next command. If the command being processed terminates abnormally, an error message is output and a ":" is returned. Item Command Power ON/OFF On PWR ON Off PWR OFF Signal selection Computer1 Auto SOURCE 1F RGB SOURCE 11 Component SOURCE 14 Computer2 Auto SOURCE 2F RGB SOURCE 21 Component SOURCE 24 Video SOURCE 41 S-Video SOURCE 42 USB Display SOURCE 51 USB (EB-826W/825/824/85) SOURCE 52 LAN(EB-826W/825/85) SOURCE 53 A/V Mute On/Off On MUTE ON Off MUTE OFF A/V Mute selection Black MSEL 00 Blue MSEL 01 Item Command Logo MSEL 02 Add a Carriage Return (CR) code (0Dh) to the end of each command and transmit. Cable LayoutsSerial Connection •Connector shape: D-Sub 9-pin (male) ESC/VP21 Commands 90