Epson Projector Eb 825 User Manual
Have a look at the manual Epson Projector Eb 825 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Network Menu (EB-826W/825/85/84 only) When Network Protect is set to On in Password Protect, a message is displayed and the settings cannot be changed. You can make changes after setting Network Protect to Off. s p.29 EB-826W/825/85/84 EB-84 Sub MenuFunction Network InformationYou can confirm the setting status for each network as follows. Network ConfigurationThe following menus are available for setting Network items. Basic Menu, Wireless LAN Menu, Security Menu, Wired LAN Menu, Mail Menu, Others Menu, Reset Menu, Setup complete Menuq By using the Web browser of a computer connected to the projector on a network, you can set the functions and control the projector. This function is called Web Control. You can easily enter text using a keyboard to make settings for Web Control such as Security settings. s Projector Operation Guide "Changing Settings Using a Web Browser (Web Control)" List of Functions 41
Notes on operating the Network menu Selecting from the top menu and sub menus, and changing of selected items are the same as operations in the Configuration Menu. When done, make sure you go to the Setup complete menu, and select one of Yes, No, or Cancel. When you select Yes or No, you return to the Configuration Menu.Yes: Saves the settings and exits the Network menu. No: Does not save the settings and exits the Network menu. Cancel: Continues displaying the Network menu. Soft keyboard operations The Network menu contains items that require input of alphanumerics during setup.In this case, the following software keyboard is displayed. Use the [ ][ ][ ][ ] buttons on the Remote Control or the [ w ], [ v ], [ a], and [ b] buttons on the Control panel to move the cursor to the desired key, and then press the [Enter] button to enter the alphanumeric. Enter figures by holding down the [Num] button on the Remote Control, and pressing the numeric buttons. After inputting, press [Finish] on the keyboard to confirm your input. Press [Cancel] on the keyboard to cancel your input. Each time the [CAPS] key is selected, it sets and changes between upper case and lower case letters. Each time the [SYM1/2] key is selected, it sets and changes the symbol keys for the section enclosed by the frame. List of Functions 42
Basic Menu EB-826W/825/85EB-84 Sub MenuFunction Projector NameDisplays the projector name used to identify the projector when connected to a Network. When editing, you can enter up to 16 single-byte alphanumeric characters. PJLink Password Set a Password to use when you access the projector using compatible PJLink software. s p.92 You can enter up to 32 single-byte alphanumeric characters. Web Control PasswordSet a password to use when making settings and controlling the projector using Web Control. You can enter up to 8 single-byte alphanumeric characters. Web Control is a computer function that allows you to set up and control the projector by using the Web browser on a computer connected on a Network. s Projector Operation Guide "Changing Settings Using a Web Browser (Web Control)" Projector keyword (EB-826W/825/85 only)When set to On, you have to enter the Keyword when you try to connect the projector to a computer on a Network. As a result, EMP NS Connection can prevent presentations from being interrupted by unscheduled connections from a computer during projection. Normally this should be set to On. s Projector Operation Guide "Connecting to a Projector on a Network and Projecting" List of Functions 43
Wireless LAN Menu (EB-826W/825/85 only) Settings are enabled when the optional Wireless LAN unit is installed. Sub MenuFunction Connection modeUse EMP NS Connection to set the mode, how the computer connect to the projector. Set to Quick Connection Mode when you want to make a quick wireless connection. Set to Advanced Connection Mode when you want to connect to a network system via an access point. Wireless LAN systemSets the Wireless LAN system. SSID g Enter an SSID. When an SSID is provided for the Wireless LAN system in which the projector participates, enter the SSID. You can enter up to 32 single-byte alphanumeric characters. IP SettingsYou can make settings related to the following addresses.DHCP g: Select whether or not (On/Off) to use DHCP. If this is set to On you cannot set any more addresses. IP Address g: You can input the IP Address assigned to the projector. You can input a number from 0 to 255 in each field of the address. However, the following IP Addresses cannot be used. 0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255) Subnet Mask g: You can input the Subnet Mask for the projector. You can input a number from 0 to 255 in each field of the address. However, the following Subnet Masks cannot be used. 0.0.0.0, 255.255.255.255 Gateway Address g: You can input the IP Address for the gateway for the projector. You can input a number from 0 to 255 in each field of the address. However, the following Gateway Addresses cannot be used. 0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255) SSID Display To prevent the SSID from being displayed on Network Info in the Network Menu and on the LAN Standby screen, set this to Off. List of Functions 44
Sub MenuFunction IP Address Display To prevent the IP Address from being displayed on Network Info in the Network Menu and on the LAN Standby screen, set this to Off. Security Menu (EB-826W/825/85 only) Settings are enabled when the optional Wireless LAN unit is installed. Sub MenuFunction SecuritySelect one type of security from the following items. When setting up Security, follow the instructions from the administrator of the network system you are about to access. When using Advanced Connection Mode, it is essential that you make security settings. WEP: Data is encrypted with a code key (WEP key). This mechanism prevents communication unless the encrypted keys for the access point and the projector match. WPA/WPA2: This is an encryption standard that improves security which is a weak point of WEP. Although there are multiple kinds of WPA encryption methods, this projector uses "TKIP" and "AES". WPA also includes user authentication functions. WPA authentication provides two methods: Using an authentication server, or authenticating between a computer and an access point without a server. This projector supports the latter method, without a server. List of Functions 45
When WEP is selected You can set the following items. Sub MenuFunction WEP encryptionYou can set the encryption for WEP encryption. 128bit: Uses 128 (104) bit encoding 64bit: Uses 64 (40) bit encoding FormatYou can set the input method for the WEP encryption key. ASCII: Input text. HEX: Input in HEX (hexadecimal). Key IDSelects the WEP encryption ID key. Encryption key 1 Encryption key 2 Encryption key 3 Encryption key 4You can enter the key used for WEP encryption. Enter the key in single-byte characters following instructions from the network administrator for the network in which the projector participates. The type of character and the number that can be entered differ according to the WEP encryption and Format settings. If the number of characters you enter is shorter than the required character length, or if the number of characters you enter is longer than the required character length, it does not connect. 128bit - ASCII: Single-byte alphanumerics, 13 characters. 64bit - ASCII: Single-byte alphanumerics, 5 characters. 128bit - HEX: 0 to 9 and A to F, 26 characters 64 bit - HEX: 0 to 9 and A to F, 10 characters When WPA-PSK (TKIP) or WPA2-PSK (AES) is selected You can set the following items. Sub MenuFunction PSK You can enter a PreSharedKey (encrypted key) in single-byte alphanumeric characters. Enter at least 8 and up to 63 characters. When the PreSharedKey is entered and the [Enter] button is pressed, the value is set and displayed as an asterisk (*). You cannot enter more than 32 characters on the Configuration Menu. When setting from Web Control, you can enter more than 32 characters. s Projector Operation Guide "Changing Settings Using a Web Browser (Web Control)" List of Functions 46
Wired LAN Menu Sub MenuFunction IP SettingsYou can make settings related to the following addresses. DHCP g: Select whether or not (On/Off) to use DHCP. If this is set to On you cannot set any more addresses. IP Address g: You can input the IP Address assigned to the projector. You can input a number from 0 to 255 in each field of the address. However, the following IP Addresses cannot be used. 0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255) Subnet Mask g: You can input the Subnet Mask for the projector. You can input a number from 0 to 255 in each field of the address. However, the following Subnet Masks cannot be used. 0.0.0.0, 255.255.255.255 Gateway Address g: You can input the IP Address for the gateway for the projector. You can input a number from 0 to 255 in each field of the address. However, the following Gateway Addresses cannot be used. 0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255) IP Address Display To prevent the IP Address from being displayed on Network Info in the Network Menu and on the LAN Standby screen, set this to Off. List of Functions 47
Mail Menu When this is set, you receive an e-mail notification if a problem or warning occurs in the projector. For information on the contents of the sent Mail, see "Reading Problem Mail Notification Function (EB-826W/825/85/84 only)" s p.89 Sub MenuFunction Mail NotificationYou can set whether or not (On/Off) to be notified by e-mail. SMTP ServerYou can input the IP Address g for the SMTP Server for the projector. You can input a number from 0 to 255 in each field of the address. However, the following IP Addresses cannot be used. 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255) Port Number You can input the Port Number for the SMTP Server. The default value is 25. You can input numbers between 1 to 65535. Address 1 Setting Address 2 Setting Address 3 SettingInput the Email Address and the contents of the Mail to receive notification when an abnormality or warning occurs in the projector. You can enter up to 32 single-byte alphanumeric characters for the Email Address. You can select multiple problems or warnings to be notified about by Mail. You can also change each Email Address. List of Functions 48
Others Menu EB-826W/825/85 EB-84 Sub MenuFunction Trap IP Address 1 Trap IP Address 2You can register up to two for the SNMP g trap notification destination. You can input a number from 0 to 255 in each field of the address. However, the following IP Addresses cannot be used. 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255) To use SNMP to monitor the projector, you need to install the SNMP manager program on your computer. SNMP should be managed by a network administrator. Priority gateway (EB-826W/825/85 only)For the priority gateway, select either wireless or wired. AMX Device Discovery g When the projector is connected to a network, set this to On to allow the projector to be detected by AMX Device Discovery. Set this to Off if you are not connected to an environment controlled with a controller from AMX or AMX Device Discovery. List of Functions 49
Reset Menu Resets all of the Network settings. Sub MenuFunction Reset network settings.To reset all of the Network settings, select Yes. After you Reset all the settings, the Basic menu appears. List of Functions 50