Epson Projector Eb 825 User Manual

Network  Menu  (EB-826W/825/85/84  only)
When  Network  Protect is  set  to  On in  Password  Protect,  a  message  is  displayed  and  the  settings  cannot  be  changed.  You  can  make  changes  after
setting  Network  Protect to  Off. 
s
 p.29
EB-826W/825/85/84 EB-84
Sub MenuFunction
Network InformationYou can confirm the setting status for each network as follows.
Network ConfigurationThe following menus are available for setting Network items.
Basic Menu, Wireless LAN Menu, Security Menu, Wired LAN...

Notes  on  operating  the  Network  menu
Selecting  from  the  top  menu  and  sub  menus,  and  changing  of  selected
items  are  the  same  as  operations  in  the  Configuration  Menu.
When  done,  make  sure  you  go  to  the  Setup  complete menu,  and  select
one  of  Yes, No, or Cancel. When you select Yes or  No,  you  return  to
the  Configuration  Menu.Yes:  Saves  the  settings  and  exits  the  Network  menu.
No:  Does  not  save  the  settings  and  exits  the  Network  menu.
Cancel:...

Basic  Menu
EB-826W/825/85EB-84
Sub MenuFunction
Projector NameDisplays the projector name used to identify the projector when connected to a Network.
When editing, you can enter up to 16 single-byte alphanumeric characters.
PJLink Password
Set a Password to use when you access the projector using compatible PJLink software. s p.92
You can enter up to 32 single-byte alphanumeric characters.
Web Control PasswordSet a password to use when making settings and controlling the projector using Web Control. You...

Wireless  LAN  Menu  (EB-826W/825/85  only)
Settings  are  enabled  when  the  optional  Wireless  LAN  unit  is  installed.
Sub MenuFunction
Connection modeUse EMP NS Connection to set the mode, how the computer connect to the projector.
Set to Quick Connection Mode when you want to make a quick wireless connection. Set to Advanced Connection Mode when you want to
connect to a network system via an access point.
Wireless LAN systemSets the Wireless LAN system.
SSID
g
Enter an SSID. When an SSID is...

Sub MenuFunction
IP Address Display
To prevent the IP Address from being displayed on Network Info in the Network Menu and on the LAN Standby screen, set this to Off.
Security  Menu  (EB-826W/825/85  only)
Settings  are  enabled  when  the  optional  Wireless  LAN  unit  is  installed.
Sub MenuFunction
SecuritySelect one type of security from the following items.
When setting up Security, follow the instructions from the administrator of the network system you are about to access. When using Advanced...

When  WEP  is  selected
You  can  set  the  following  items.
Sub MenuFunction
WEP encryptionYou can set the encryption for WEP encryption.
128bit: Uses 128 (104) bit encoding
64bit: Uses 64 (40) bit encoding
FormatYou can set the input method for the WEP encryption key.
ASCII: Input text.
HEX: Input in HEX (hexadecimal).
Key IDSelects the WEP encryption ID key.
Encryption key 1
Encryption key 2
Encryption key 3
Encryption key 4You can enter the key used for WEP encryption. Enter the key in single-byte...

Wired  LAN  Menu
Sub MenuFunction
IP SettingsYou can make settings related to the following addresses.
DHCP
g: Select whether or not (On/Off) to use DHCP. If this is set to On you cannot set any more addresses.
IP Address
g: You can input the IP Address assigned to the projector. You can input a number from 0 to 255 in each field of the address. However,
the following IP Addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
Subnet
 Mask
g: You can...

Mail  Menu
When  this  is  set,  you  receive  an  e-mail  notification  if  a  problem  or  warning  occurs  in  the  projector.  For  information  on  the  contents  of  the  sent  Mail,
see  "Reading  Problem  Mail  Notification  Function  (EB-826W/825/85/84  only)" 
s
 p.89
Sub MenuFunction
Mail NotificationYou can set whether or not (On/Off) to be notified by e-mail.
SMTP ServerYou can input the 
IP Address
g for the SMTP Server for the projector.
You can input a number from 0 to 255 in each...

Others  Menu
EB-826W/825/85 EB-84
Sub MenuFunction
Trap IP Address 1
Trap IP Address 2You can register up to two for the 
SNMP
g trap notification destination.
You can input a number from 0 to 255 in each field of the address.
However, the following IP Addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
To use SNMP to monitor the projector, you need to install the SNMP manager program on your computer. SNMP should be managed by a
network administrator....

Reset  Menu
Resets  all  of  the  Network  settings.
Sub MenuFunction
Reset network settings.To reset all of the Network settings, select Yes.
After you Reset all the settings, the Basic menu appears.
List of Functions
50