Epson Projector BrightLink 1430Wi User Manual

You see the Quick Corner adjustment screen:
6. Use the arrow buttons on the projector or the remote control to select the corner of the image you want to adjust. Then press Enter.
7. Press the arrow buttons to adjust the image shape as necessary.
8. When you are finished, press Esc.
Note: Using Quick Corner can affect the accuracy of the interactive pens.
Parent topic: Image Shape
Resizing the Image with the Wide and Tele Buttons 1. Turn on the projector and display an image.
2. To enlarge the image...

3. To reduce the image size, press the
Telebutton.
After you adjust the image size, the Image Shift screen is displayed automatically for adjusting the
image position.
Note: If the projector is installed out of reach, you can also adjust the image size with the remote
control using the Zoomsetting in the projector menus.
Parent topic: Using Basic Projector Features
Related references
Projector Feature Settings - Settings Menu
Adjusting the Image Position You can use the Image Shift feature to adjust the...

1. Turn on the projector and display an image.
2. Adjust the image size using the
WideandTele buttons.
After you adjust the image size, the Image Shift screen is displayed automatically.
3. Use the arrow buttons on the projector or remote control to adjust the image position. Note: You can also use the Settings menu to adjust the Image Shiftsetting.
Parent topic: Using Basic Projector Features
Related references
Projector Feature Settings - Settings Menu
Focusing the Image 1. Turn on the projector and...

3. Raise or lower the focus lever to sharpen the image.
Parent topic:
Using Basic Projector Features
Related references
Projector Feature Settings - Settings Menu
Remote Control Operation The remote control lets you control the projector from almost anywhere in the room, up to 19.7 feet (6 m)
away. You can point it at the screen or board, or the front or back of the projector.
124  

Make sure that you aim the remote control at the projectors receivers within the angles listed here.
1 19.7 feet (6 m)
2 ± 30°
3 ± 55°
4 60°
5 75°
6 15°
Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or
the projector may not respond to commands. If you will not use the remote control for a long time,
remove the batteries.
Using the Remote Control as a Wireless Mouse
Using the Remote Control as a Pointer
Parent topic: Using Basic Projector...

Using the Remote Control as a Wireless Mouse
You can use the projectors remote control as a wireless mouse so you can control projection at a
distance from the computer.
Note:This feature cannot be used at the same time as the interactive pens. If you want to use the
remote control as a wireless mouse, you need to change the USB Type Bsetting in the projectors
Extended menu.
1. Connect the projector to a computer using the projectors USB-B,Computer, or HDMIport to
display video.
Note: You cannot use the...

Parent topic:
Remote Control Operation
Using the Remote Control as a Pointer You can use the projectors remote control as a pointer to help you call out important information on the
screen. The default pointer shape is an arrow, but you can select an alternative shape using the Settings
menu.
1. Press thePointerbutton on the remote control.
2. Use the arrow buttons on the remote control to move the pointer on the screen.
3. Press Escto clear the pointer from the screen.
Parent topic: Remote Control...

3. Press the
Source Search button on the projector, remote control, or control pad, then select the
source you want.
Parent topic: Using Basic Projector Features
Related tasks
Selecting a Networked Device Source
Projection Modes Depending on how you positioned the projector, you may need to change the projection mode so your
images project correctly.
•Front lets you project from a table in front of the screen.
128   

•
Front/Upside Down (default setting) flips the image over top-to-bottom to project upside-down from a
wall or ceiling mount. This mode should also be used when you mount the projector vertically on a
table to create an interactive work surface.
• Rear flips the image horizontally to project from behind a translucent screen.
• Rear/Upside Down flips the image over top-to-bottom and horizontally to project from the wall or
ceiling and behind a translucent screen.
Note: The two Rear modes cannot be used...

Parent topic:
Projection Modes
Changing the Projection Mode Using the Menus You can change the projection mode to flip the image over top-to-bottom and/or left-to-right using the
projector menus.
1. Turn on the projector and display an image.
2. Press theMenubutton.
3. Select the Extendedmenu and press Enter.
4. Select the Projectionsetting and press Enter.
5. Select a projection mode and press Enter.
6. Press MenuorEsc to exit the menus.
Parent topic: Projection Modes
Related references
Projector Setup...