Epson Projector BrightLink 1430Wi User Manual

4. Replace the cable cover and tighten the screws.
5. Plug in and turn on the projector.
Parent topic:
Wireless Network Projection
Using Quick Wireless Connection (Windows Only) You can use the Quick Wireless Connection USB Key to quickly connect the projector to a Windows
computer wirelessly. Then you can project your presentation and remove the key when you are done.
Note:The Quick Wireless Connection USB Key is not included with your projector.
1. Turn on the projector.
2. Connect the USB key to the...

5. Follow the on-screen instructions to install the Quick Wireless Connection driver.
Note: If you see a Windows Firewall message, click Yesto disable the firewall.
After a few minutes, your computer image is displayed by the projector. If it does not appear, press
the Source Search button on your remote control and select the LANsource, or restart your
computer.
6. Run your presentation as necessary.
7. When you finish projecting wirelessly, select the Safely Remove Hardwareoption in the Windows...

4. Select
Network Configuration and pressEnter.
5. Select the Basicmenu and press Enter.
6. Select the following basic options as necessary: •Projector Name lets you enter a name up to 16 alphanumeric characters long to identify the
projector over the network.
• Web Remote Password lets you enter a password up to 8 alphanumeric characters long for
accessing the projector over the web.
• Projector Keyword lets you turn on a security password to prevent access to the projector by
anyone not in the room...

7. Select the
Wireless LAN menu and press Enter.
8. Select the settings on the Wireless LANmenu as necessary for your network.
9. When you finish selecting settings, select Setup completeand follow the on-screen instructions to
save your settings and exit the menus.
After you complete the wireless settings for your projector, you need to select the wireless network on
your computer.
Wireless LAN Menu Settings
Parent topic: Wireless Network Projection
Wireless LAN Menu Settings
Setting OptionsDescription...

Setting
OptionsDescription
Wireless LAN System 802.11b/gSets the type of wireless LAN
system the projector is
802.11b/g/n
connecting to
Connection Mode QuickSelects the type of wireless
connection:
Advanced
Quick: lets you quickly connect
to one computer or use the
optional Quick Wireless
Connection USB key to connect.
If theSSID Auto Setting is set to
On, the projector becomes an
easy access point. If SSID Auto
Setting is set toOff, the network
is created in Ad hoc mode.
Advanced: lets you connect to...

Setting
OptionsDescription
SSID Display OnSelects whether to display the
SSID on the network standby
Off
screen
DHCP OnTurns on DHCP if your network
assigns addresses automatically;
Off
set toOffto manually enter the
networks IP Address, Subnet
Mask, and Gateway Address
DNS Server IP addressSets the IP address for the DNS
server. The DNS server resolves
the host name entered during
email configuration
WINS server IP addressSets the IP address for the
network folder where images are
saved; this setting is...

Parent topic:
Wireless Network Projection
Selecting Wireless Network Settings in OS X Before connecting to the projector, select the correct wireless network in OS X.
1. Click the AirPort icon on the menu bar at the top of the screen.
2. Make sure AirPort is turned on, then do one of the following:• If your projector is set up on an existing network (Advanced mode), select the network name(SSID).
• If your projector is configured for Quick mode, select the projectors SSID.
Parent topic: Wireless Network...

3. When you finish selecting settings, select
Setup completeand follow the on-screen instructions to
save your settings and exit the menus.
Wireless Security Menu Settings
Parent topic: Wireless Network Projection
Wireless Security Menu Settings Settings on the Security menu let you select the type of security and security settings that match the
network you are connecting the projector to.
Setting OptionsDescription
Security OpenSelects the type of security used
on the wireless network
WPA/WPA2-PSK...

Setting
OptionsDescription
User name Various user names up to 64 For WPA/WPA2-EAP security,
charactersselects the user name;
automatically detected when
using thePEAP-TLS orEAP-
TLS EAP methods
Note: You can enter up to 32
characters in the projector menu.
To input more than 32
characters, use your Web
browser.
Password Various passwords up to 64 For WPA/WPA2-EAP security,
charactersselects the password for EAP
authentication
Note:You can enter up to 32
characters in the projector menu.
To input more...

Setting
OptionsDescription
Setting RADIUS Server Name On For WPA/WPA2-EAP security,
selects whether to verify the
Off
authentication server name
during certificate verification
RADIUS Server Name Various server names up to 32 For WPA/WPA2-EAP security,
charactersselects the server name to verify
Verify Exp. date of Server Cert. On For WPA/WPA2-EAP security,
selects whether to verify the
Off
server certificates validity period
during certificate verification
Parent topic: Enabling WPA or EAP Security...