Epson Projector BrightLink 1430Wi User Manual

Parent topic:
Using Finger Touch Interactivity
Calibrating for Finger Touch Interactivity Finger touch calibration coordinates the positioning of your finger with the location of the cursor
(BrightLink Pro 1430Wi).
Note:Make sure you have calibrated the pens before calibrating for finger touch interactivity.
1. Press the Menubutton, select the Extendedmenu, and press Enter.
171 

2. Select the
Easy Interactive Function setting and pressEnter.
3. Select Touch Unit Setup and pressEnter.
4. Select Touch Calibration and pressEnter.
172 

The following screen appears:
5. Adjust the image focus, if necessary.
6. Press Enterto select Yes.
A flashing green circle appears in the upper left corner of your projected image.
7. Touch and hold the center of the circle with your finger until the circle disappears and another circle appears, then release it.
The circle disappears, and you see another circle below the first one.
173  

Note:
For the most accurate calibration, make sure you touch the center of the circle with the tip of
your finger.
Note: Make sure you are not blocking the signal between your finger and the interactive receiver
(next to the projection window on the projector).
8. Touch the center of the next circle with your finger and continue until all of the circles disappear. When you get to the bottom of a column, the next circle appears at the top of a new column.
Note: If you make a mistake, press the Escbutton...

Parent topic:
Using Finger Touch Interactivity
Related tasks
Adjusting the Angle of the Touch Unit
Using Finger Touch Operations
Using Finger Touch Operations You can use your finger to interact with the projected screen, just as you would use an interactive pen
(BrightLink Pro 1430Wi). You can use either a pen or your finger, or use both at the same time.
When performing touch operations with your finger, you can use two fingers in annotation and
whiteboard modes.
1. Calibrate the pens.
2. Install the...

6. To write or draw on the projection surface in annotation mode or whiteboard mode, do the following:
• To select a projected item, such as an icon, tap the projection surface with your finger.
• To draw on the projected screen, tap the projection surface with your finger and drag it asnecessary.
7. To use your finger as a mouse in PC Interactive mode, do the following:
• To left-click, tap the board with your finger.
• To double-click, tap twice with your finger.
• To right-click, press the board with...

• To drag up or down on a page, or move backward or forward in a browser window, use swiping
gestures or flicks.
Note: Finger touch operations may not work correctly with long or artificial nails, or fingers wearing
bandages. If your fingers are too close together or crossed, or your sleeve touches the screen, finger
touch may not be recognized. Some operating systems may not support gestures.
Parent topic: Using Finger Touch Interactivity
Related tasks
Calibrating for Finger Touch Interactivity
Using...

Note:
Easy Interactive Driver must be installed and running to use Easy Interactive Tools on a Mac.
Requirement Windows Mac
Operating system Windows XP Professional SP2 or later, OS X 10.5.x, 10.6.x, OS X 10.7.x, Home Edition 10.8.x, 10.9.x (32-bit)
OS X 10.6.x, OS X 10.7.x, 10.8.x,
Windows Vista Ultimate, Enterprise,
10.9.x (64-bit)
Business, Home Premium, and Home
Basic (32-bit)
Windows 8.x Pro, Enterprise, Windows 7
Ultimate, Enterprise, Professional, Home
Premium, and Home Basic (32- and 64-
bit)
CPU...

Controlling Computer Features from a Projected Screen (PC Interactive Mode)
You can navigate, select, and interact with your computer programs from the projected screen using the
interactive pens or your finger (BrightLink Pro 1430Wi) just as you would a mouse.
Note:OS X users need to install the Easy Interactive Driver before using PC Interactive mode. Go to
epson.com/support (U.S.) orepson.ca/support (Canada) and select your projector.
1. Connect the projector to your computer using a USB cable.
2....

7. Select the
Easy Interactive Function setting and press theEnterbutton.
8. Select one of the following as the Pen Operation Modedepending on your projector model and
computer operating system (BrightLink Pro 1430Wi):
BrightLink Pro 1420Wi:
• Two Users/Mouse: Lets you use both interactive pens as a mouse
• One User/Mouse: Lets you use one interactive pen as a mouse
• One User/Pen: Uses the Windows pen and ink feature (Windows 8.x, Windows 7, and Windows
Vista)
BrightLink Pro 1430Wi:
• Mode 1: Windows XP...