Epson Powerlite 755c Multimedia Projector Users Guide

Managing Projectors131
10. If you want to send e-mail alerts to other computers, enter 
addresses for those computers in the 
Destination address 2 and 
Destination address 3 boxes.
11. Select the conditions under which an e-mail alert will be sent.
12. When you’re done, highlight the 
OK button at the top of the 
screen (you can either use the  pointer button on the remote 
control or press 
Esc) and press Enter. Highlight the OK button 
again and press 
Enter to return to the main EasyMP Network...

132Managing Projectors
Using a Browser to Monitor Projectors
If your projectors are connected to a network (802.11g or 802.11b 
wireless or wired LAN), you can use a standard web browser to 
monitor and control each one. 
1. Make sure the Epson 802.11g wireless card is inserted in the 
projector’s card slot and the projector is configured for Access 
Point mode, as described on page 59.
2. Open the web browser and enter the IP address of the projector 
you want to monitor in the browser window. 
If...

Managing Projectors133
If you’re connected over an 802.11g wireless network, start 
NS Connection (see page 74) and connect to the projector you 
want to monitor. Then click   on the control bar that appears 
on the screen. The projector’s web screen opens in the browser 
window.
4. Select one of the menu options listed on the left, then change any 
settings as needed in the main part of the screen. These settings 
correspond to those found in the projector’s menu system; for 
details, see page 108.
5....

134Managing Projectors
Using Projector Groups
You can register projectors as a group if you want to provide quick and 
easy access to other computers. You can also export or import group 
information as a file to another computer. Projectors must be 
connected to the network in Access Point mode, and must be on the 
same network segment as the computer used to create the group, or 
the computers that import or export group information.
Creating a Group
You can register up to 16 projectors as a group, and...

Managing Projectors135
4. Click the Advanced button. You see this screen:
5. Enter a name for the group in the 
Connection Group box. 
Then enter the IP address of the projector you want to register in 
the
IP address box:
note
You cannot use the addresses 
0.0.0.0 or 255.255.255.255. 

136Managing Projectors6. Click 
Add. The IP address appears in the list of registered 
projectors and the  searching icon appears beside it. If the 
projector is found, its name appears in the projector list.
7. Repeat steps 5 and 6 for each projector you want to add to the 
group.
8. Click
 OK to save the projectors as a group. When you see a 
confirmation message, click 
Yes.
9. Click 
Close to close the Advanced screen.
10. Click 
OK to close the Extension screen, then close 
NS Connection.
note
To...

Managing Projectors137
Connecting to a Projector in a Group
Follow these steps to connect to a projector in a group:
1. Start NS Connection. (See page 74.)
2. Click the 
Extension button on the EMP NS Connection screen. 
You see this screen:
3. Select 
Use IP connect mode and Use Group List. 
Select these 
two boxes 

138Managing Projectors4. From the Connection Group list, choose the group you want to 
connect to and click 
OK.
5. When you see the next screen, click 
IP connection. (If the upper 
left button on the screen says 
IP connect mode rather than 
Automatic search mode, skip this step.) 

Managing Projectors139
You see this screen:
 
6. Select the projector you want to connect to and click Connect.
7. If you want, repeat step 5 to connect to additional projectors.
The computer’s image appears on the projector screen.
Exporting a Projector Group
You can export group information as a file to another computer on 
the wireless network. This is useful if you want to share group access 
with multiple users.
1. Start NS Connection. (See page 74.)
2. Click the 
Extension button on the EMP NS...

140Managing ProjectorsYou see this screen:
3. Select 
Use IP connect mode and Use Group List. 
4. Click the 
Advanced button. You see this screen.
5. Click 
Export to export a file for all groups in the Connection 
Group list.
Select these 
two boxes
note
If you haven’t created any 
groups, the 
Export button 
will be grayed out. You must 
create at least one group 
before the 
Export button 
is active.