Epson Powerlite 755c Multimedia Projector Users Guide

Presenting Through a Wireless Network81
3. Select Use IP connect mode and click OK. You see this screen:
 
4. Click IP connection. You see this screen:
 
5. Enter the projector’s IP address and click Search. 
Click here
Enter the IP 
address and 
click Search
note
You can add up to 16 
projectors to the list. If you 
add more, NS Connection 
begins to delete projectors 
from the list, starting with 
the first projector added. 

82Presenting Through a Wireless NetworkThe IP address appears in the Projector list and a  searching 
icon displays. When the projector is found, its name appears in 
the list:
 
If the search fails to find a projector with the specified IP address, 
the searching icon turns into a question mark. If this happens, run 
EasyMP on your projector (see page 50) to check the projector’s 
IP address, then repeat this step.
6. Click the projector you want to connect to and click the 
Connect 
button. If more...

Presenting Through a Wireless Network83
Switching Between Users 
To connect to the projector while another person is already using it 
(Access Point mode only), follow these steps. 
1. Start NS Connection (see page 74). You see this screen:
2. Select the projector you want to use and click 
Connect. 
You see this message:
3. Click 
Yes to connect. 
The other user is automatically disconnected and notified about 
the interruption: 
note
If a projector is in use and is 
“locked,” you won’t be able to...

84Presenting Through a Wireless Network
Removing the Wireless 802.11g Card
Follow these steps to remove the card from your projector. 
1. If you’re running NS Connection, click 
Disconnect on the 
control bar.
 
2. Check the card access light to make sure it isn’t flashing. Then 
press the eject button. The button pops out. 
3. Press the eject button again. The wireless card partially ejects.
4. Pull the card straight out. Then press the eject button back in to 
prevent it from being damaged. 
Click...

85
1
Presenting from a Memory 
Card, Digital Camera, or 
External Drive
The projector’s EasyMP feature lets you give presentations from a 
memory card or a digital camera connected to the projector with a 
USB cable. You can play movies, display graphics, or play a scenario, a 
format that lets you create your own slideshow using PowerPoint files, 
JPG image files, and BMP graphics files. 
This chapter covers the following:
■Inserting the memory card in the projector and removing it 
■Creating a...

86Presenting from a Memory Card, Digital Camera, or External Drive
Inserting a Memory Card in the 
Projector
Follow these steps to insert the memory card in the projector:
1. If necessary, insert the card into a PC card 
adapter. (ATA flash cards don’t require an 
adapter.)
2. Insert the card (with the adapter) into the projector with the label 
facing up. The projector does not have to be turned off before 
inserting the card.
Removing a Memory Card
When you’re done using the projector and want to...

Presenting from a Memory Card, Digital Camera, or External Drive87
Creating a Slideshow on the Fly
If you have a folder on your memory card containing an assortment of 
images, you can display them as a slideshow. 
Displaying the Slideshow
First make sure the images are stored in a folder on the memory card. 
Then follow these steps:
1. Use the  pointer button on the remote control to highlight the 
folder containing your images and press 
Enter. 
2. From the drop-down menu, use the pointer to select...

88Presenting from a Memory Card, Digital Camera, or External Drive
■Press the appropriate side of the  pointer button to rotate a 
slide or image on the screen.
■To exit the slideshow at any point, press the Esc button. Press the 
Enter button to confirm that you want to exit. 
Changing Timing and Other Settings
For each folder on the memory card, you can set the display timing for 
your slides and change several other display settings. 
1. Select the  folder containing the images for the slideshow...

Presenting from a Memory Card, Digital Camera, or External Drive89
■Display order
Lets you choose between displaying alphabetically by file 
name or by image file date. 
■Effect
Lets you choose from various transitions between slides, such 
as Dissolve or Wipe.
■Mode switching
Lets you choose the mode to use when presenting slideshows, 
movies, or images, or editing a scenario on the projector.
In 
Guide mode, a drop-down menu appears whenever you 
select an item and press 
Enter. 
In 
Quick mode,...

90Presenting from a Memory Card, Digital Camera, or External Drive4. Select EasyMP as the source by pressing the 
EasyMP button on 
the remote control. If your camera complies with the DCIM 
standard, you’ll see a 
DCIM folder appear on the EasyMP 
CardPlayer screen.
5. Use the  pointer button on the remote control to position the 
cursor on the folder and press 
Enter. 
6. Select 
Open Folder in the drop-down menu. When the folder 
opens, you see another folder with your manufacturer’s name.
7. Position...