Epson Powerlite 755c Multimedia Projector Users Guide

Presenting from a Memory Card, Digital Camera, or External Drive101
Transferring Your Scenario to a 
Memory Card
Once your scenario is saved, you can transfer it to a memory card or 
USB storage device. You can use any of the following standard cards. 
Most require a PC card adapter to allow insertion into the projector 
(check with your computer dealer to purchase a PC card adapter). 
Be sure to use the transfer process described below to ensure that the 
scenario plays properly: 
1. Insert the memory...

102Presenting from a Memory Card, Digital Camera, or External DriveOnce the scenario is transferred, you see this message about your 
scenario’s autorun setting:
 
The autorun setting means that the scenario will start playing 
whenever the projector is turned on (with the memory card in the 
projector).
7. Do one of the following:
■If you don’t want the scenario to run automatically, click 
Cancel
. Skip to step 11 to remove the card and insert it in 
the projector.
■If you want it to run automatically,...

Presenting from a Memory Card, Digital Camera, or External Drive103
10. When done, click OK.
11. Remove the card from your computer or disconnect the USB 
device. See your computer’s documentation if you need 
instructions on removing the card. If you’re using Windows 2000 
or Me, you may first need to click an icon to stop or disconnect 
the card
. 
Presenting Scenarios
Before you begin, insert the memory card containing the scenario into 
your projector, as described on page 86. 
The follow these steps...

104Presenting from a Memory Card, Digital Camera, or External Drive3. Use the  pointer button on the remote control to highlight 
your   scenario file and press 
Enter. A drop-down menu 
appears under the scenario.
4. Use the  pointer button to select 
Play Scenario and press 
Enter. In a moment, your scenario begins playing. 
5. When you’re done with your presentation, use the  pointer 
button to highlight 
EJECT in the upper right corner of the screen, 
and press 
Enter on the remote control. When you...

Presenting from a Memory Card, Digital Camera, or External Drive105
Editing Your Scenario on the Projector
You can modify your scenario using EasyMP on the projector. This 
lets you make last-minute changes, such as changing the order of your 
slides or hiding individual slides. These changes are not permanently 
saved with the scenario, but remain in effect only as long as the card is 
in the projector and the projector is turned on. 
1. Highlight the   scenario you want to edit, then press 
Enter. 
2....

106Presenting from a Memory Card, Digital Camera, or External Drive
Supported File Formats
The following file types may be projected from a memory card, digital 
camera, external hard drive, or flash memory drive: 
JPEG files with the extension “.jpeg” and “.mpeg” can’t be projected. 
Rename or save files as “.jpg” or “.mpg.” JPEG files with high 
compression will not look good. Movie files may not look as good 
from media with a slow access speed. 
File Type Extension Notes
Scenario .sit These are...

107
1
Fine-Tuning the Projector
You can use the projector’s on-screen menus to adjust the image, 
sound, and other features. This chapter covers the following 
information: 
■Using the menu system
■Adjusting the image
■Adjusting signal settings
■Customizing projector features
■Using the projector security features
■Customizing power and operation 

108Fine-Tuning the Projector
Using the Menu System
You can use the remote control or the projector’s control panel to 
access the menus and change settings. Follow these steps:
1. To display the menu screen, press the 
Menu button on the 
remote control or on the projector.  
You see a menu screen similar to the one below:
The menus are listed on the left and the options available for the 
highlighted menu are shown on the right.
2. Use the  pointer button on the remote control (or the arrow 
buttons on...

Fine-Tuning the Projector109
4. After highlighting the option you want to adjust, use the 
pointer button to change the setting. In some cases, you may 
have to press the 
Enter button to view a sub-screen for changing 
the setting. 
■Press the left or right side of the  pointer button to adjust
a slider bar.
■To select from two or more settings, use the  pointer 
button to highlight the desired setting and press 
Enter. 
5. After changing the settings, press the 
Esc button to save your 
changes and...

110Fine-Tuning the Projector
Adjusting the Image 
You can use the Image menu to adjust the brightness, sharpness, color, 
tint, and contrast. 
1. Press the 
Menu button on the projector or remote control and 
select the 
Image menu. You see the Image menu screen. 
2. Use the  pointer button to highlight the desired option, then 
adjust it as needed:
■Color Mode
Lets you quickly adjust the color and brightness for various 
environments. Use either the remote control or the 
Color 
Mode
 setting in the...