Epson Gt2500 User Manual

							
To scan your document, see Starting a Scan With the Start Button. 
Document Specifications
The table below listed the sizes of paper you can load in the ADF. 
Paper name Size 
Letter 8.5 × 11 inches (215.9 × 279.4 mm) 
A4 8.3 × 11.7 inches (210 × 297 mm) 
Legal 8.5 × 14 inches (215.9 × 355.6 mm) 
B5 7.2 × 10.1 inches (182 × 257 mm) 
A5 5.9 × 8.3 inches (148.5 × 210 mm) 
Load only documents that meet the following specifications in the ADF:  
						

							
Size Width: 5.9 to 8.5 inches (148.5 to 215.9 mm) 
Length: 5.9 to 14 inches (148.5 to 355.6 mm)
 
Weight 60 to 105 g/m2 
Paper type High-quality bond paper 
Make sure your documents meet the following conditions before loading th\
em into the ADF: 
l     The ink is dry. 
l     The document has no holes and is not ripped or wrinkled. 
l     The document has no staples, paper clips, or other objects attached to i\
t; these may 
damage the feeder mechanism.
 
l     The document has no folds. 
l     The document has no cut-out areas. 
l     The document is not a multipart form or bound. 
l     The document has no rear carbon coating. 
Top  
						

							
Home > Placing Originals on the Scanner 
Placing Originals on the Document Table
Placing Large or Thick Documents  
Before scanning a document, remember to respect the rights of copyright \
owners. Do not scan 
published text or images without first checking their copyright status.
 
 
Caution:
Do not place heavy objects on the document table glass and do not press \
the glass with 
too much force.
 
 
Note:
If you want to scan a multiple page document with the Automatic Document\
 Feeder, 
see Loading Documents in the Automatic Document Feeder instead.
 
Open the 
ADF.
  
						

							
Place your document or photo on the document table, face down on the gla\
ss. Make 
sure the top of the document or photo is against the upper left corner o\
f the document 
table.
  
						

							
If you are scanning multiple documents or photos at once, position each \
one at least 
0.8 inches (20 mm) away from the others.  
						

							
 
Note:
If you are scanning large or thick documents, see Placing Large or Thick 
Documents for instructions.
 
Close the ADF gently so that your original does not 
move.
  
						

							
 
Note:
l     Always keep the document table and the underside of the ADF clean. See 
Cleaning the Scanner for instructions.
 
l     Do not leave photos on the document table for an extended period of time\
 
as they may stick to the glass.
 
To scan your document or photo, see Starting a Scan With the Start Button. 
Placing Large or Thick Documents
Follow these steps to scan a large or thick document on the document tab\
le:  
						

							
Place a large or thick document on the document 
table.
 
Close the ADF and hold it down firmly as you 
scan.
  
						

							
Top  
						

							
Home > Scanning Using the Automatic Document Feeder 
Starting a Scan With the Start Button
Place your document in the ADF input tray. See Loading Documents in the Automatic 
Document Feeder for instructions.
 
 
Note:
Do not open the ADF while you are scanning or you will see an ADF error \
message 
and paper feeding will stop.
 
Press the  Start button on the scanner. Your computer automatically starts EPSON 
Scan in Office Mode the first time.
 
From EPSON Scan, you can select scan settings, preview, scan, and save y\
our image to 
a file on your computer. See Selecting EPSON Scan Office Mode Settings for 
instructions.