Epson Gt2500 User Manual

							
l     Adjust the Auto Exposure setting in EPSON Scan’s Office or Professional Mode. Also 
try selecting a different Tone Correction setting.
 
If you are scanning with the ADF, see Adjusting the Color and Other Image Settings for 
instructions.
 
If you are scanning from the document table, see Adjusting the Color and Other Image 
Settings for instructions.
 
l     Try selecting the following settings in the Configuration window: Color Control, 
Continuous auto exposure, and Recommended Value on the Color tab. Also try 
turning off the Fast Preview setting. See EPSON Scan Help for details.
 
l     Check the color matching and color management capabilities of your compu\
ter, display 
adapter, and software. Some computers can change the palette of colors o\
n your 
screen. See your software and hardware manuals for details.
 
l     Use the color management system for your computer: ICM for Windows or Co\
lorSync® 
for Mac OS X. With Windows, add a color profile that matches your monito\
r to improve 
on-screen color matching. (Exact color matching is very difficult. Chec\
k your software 
and monitor documentation for information on color matching and calibrat\
ion.)
 
l     Printed colors can never exactly match the colors on your monitor becaus\
e printers and 
monitors use different color systems: monitors use RGB (red, green, and\
 blue) and 
printers typically use CMYK (cyan, magenta, yellow, and black).
 
Top  
						

							
Home > Solving Problems 
Automatic Document Feeder Problems
You Cannot Scan Using the Automatic Document Feeder  
Paper Jams in the Automatic Document Feeder  
You Cannot Scan Using the Automatic Document Feeder
l     Make sure you have selected either Office or Professional Mode in EPSON \
Scan. See 
Changing the Scan Mode for instructions.
 
l     Make sure ADF - Single-sided, ADF - Double-sided, or Auto Detect is selected as 
Document Source in EPSON Scan. See Selecting EPSON Scan Office Mode Settings for 
instructions.
 
l     If the ADF is open, close it and try scanning again. 
l     If you are scanning from Adobe Acrobat 7 on a Macintosh system, you may \
not be able 
to use the ADF to scan multiple pages. Use the document table to scan yo\
ur pages 
individually, or scan multiple pages using EPSON Scan as described on Scanning to a 
PDF File.
 
Top 
Paper Jams in the Automatic Document Feeder
If paper jams inside the ADF, open the ADF and remove any paper from the\
 document table. 
Then look to see if paper is extending from either end of the feeder.
 
If paper is still jammed, follow these steps: 
Turn off the scanner using its power 
button.
  
						

							
If the ADF is open, close 
it.
 
Open the top cover of the 
ADF.
 
Flip open the paper guide and remove the jammed 
paper.
 
Do not pull the paper too hard or it may tear, making it more difficult \
to remove. If you 
cannot remove the paper easily, go to step 5.
  
						

							
If more of the paper extends up out of the feeder, rotate the ejecting r\
oller as shown 
below to release the paper, then gently remove it.
 
If more of the paper extends into the output tray, gently pull the paper\
 out in the 
direction shown. If necessary, rotate the ejecting roller as shown below\
 to release the 
paper.
  
						

							
After you have removed the paper, close the top cover of the 
ADF.
  
						

							
Home > Solving Problems 
Network Image Express Card Problems
You Cannot Scan Using the Network Image Express Card  
You Cannot Scan Using the Network Image Express Card
Make sure you have set the IP address for your Network Image Express Car\
d. See the 
documentation that came with your card.
 
Top  
						

							
Home > Solving Problems 
Uninstalling Your Scanning Software
Uninstalling EPSON Scan  
You may need to uninstall and then reinstall your scanner software to so\
lve certain problems 
or if you upgrade your operating system. 
Uninstalling EPSON Scan
Follow the instructions in the section for your operating system to unin\
stall EPSON Scan. 
Windows
 
Note:
l     The illustrations in this section show Windows XP screens. They may be d\
ifferent 
from the screens for your operating system.
 
l     To uninstall programs in Windows XP or 2000, you need to log on as a use\
r with 
a Computer Administrator account (Windows XP) or as a user who belongs\
 to 
the Administrators group (Windows 2000).
 
Turn off the scanner using its power 
button.
 
Disconnect the scanner’s USB cable from your 
computer.
  
						

							
Open the Windows Control Panel and double-click the Add or Remove Programs 
icon (Windows XP) or the Add/Remove Programs icon (Windows Me, 98SE, or 
2000).
 
Click EPSON Scan in the list of currently installed programs and click Change/
Remove (Windows XP or 2000) or Add/Remove (Windows Me or 98SE).
 
When the confirmation window appears, click 
Yes.
 
Follow the on-screen instructions to uninstall EPSON 
Scan.
 
In some cases, a message may appear to prompt you to restart the compute\
r. If so, 
make sure Yes, I want to restart my computer now is selected and click Finish.
 
Mac OS X 
						

							
Insert the scanner software CD-ROM in your CD-ROM or DVD 
drive.
 
Double-click the EPSON CD-ROM icon on your 
desktop.
 
Open the COMMON\EPSON Scan 
folder.
 
Double-click the EPSON Scan Installer 
icon.
 
 
Note:
If the Authorization window opens, click the key icon, enter the adminis\
trators 
name and password, click OK, and click Continue.
 
When you see the license agreement, click Accept. The Installer window 
appears.
 
Select Uninstall from the pull-down menu at the top and click the Uninstall 
button.
  
						

							
Top