Epson Gt15000 User Guide

 
Home > Scanning Special Projects 
Assigning a Program to a Scanner Button
Assigning a Project Program in Epson Event Manager to a Scanner Button 
Each scanner button opens a pre-selected program when you press it. The \
default programs they open and the default 
actions they perform are described in the table below.
Button Default action
 Start Epson Scan starts.
 CopyEpson Copy Utility starts. 
 E-mail
Epson Scan starts. After you scan, the Send File Via E-mail window appea\
rs.
 PDF The Scan to PDF...

Click the arrow in the list next to the button name, then select the act\
ion you want to 
assign. 
Click Close to close the Epson Event Manager window.
Now whenever you press the button you assigned, the action you selected \
opens.
Note:
If you need help using Epson Event Manager, click the 
 icon in the upper right corner of the screen.
Top
  

 
Home > Maintenance 
Cleaning the Scanner
To keep your scanner operating at its best, clean it periodically using \
the following procedure.
Caution:Do not press the glass surface of the document table with any force.
Be careful not to scratch or damage the glass surface of the document ta\
ble, and do not use a 
hard or abrasive brush to clean it. A damaged glass surface can decrease\
 the scan quality.
Never use alcohol, thinner, or corrosive solvent to clean the scanner. T\
hese chemicals can...

a. underside of ADF 
b. left side of document table 

 
Home > Maintenance 
Replacing the Scanner Light Source
The luminosity of the scanner light source declines over time. If the li\
ght source breaks or becomes too dim to operate 
normally, the scanner stops working and both the Ready and Error lights \
rapidly flash. When this happens, the light 
source assembly must be replaced by a professional. For details, contact\
 Epson. See Contacting Epson Support for 
more information.
Caution:
Never open the scanner case. If you think repairs or adjustments...

 
Home > Maintenance 
Transporting the Scanner
Before you transport the scanner for a long distance or store it for an \
extended period of time, you need to lock the 
scanner’s carriage to prevent damage.
Make sure the carriage is in the home position on the left side of the s\
canner. If the carriage is not in the home 
position, turn on the scanner and wait until the carriage moves to the h\
ome position.
Turn off the scanner, then unplug the AC adapter cord.
Disconnect all the cables from the...

 
Home > Solving Problems 
Scanner Problems
The Lights Are Flashing 
The Scanner Does Not Turn On 
The Scanner Does Not Turn Off 
The Scanner Turns Off 
You Cannot Start Epson Scan 
Pressing the Start Button Does Not Start the Correct Program 
The Lights Are Flashing
When an error occurs, the scanner cancels operating and the Error and Re\
ady lights indicate the error type.Error light 
(Orange) Ready light 
(Green)Meaning
Flashing  OffAn error has occurred. 
Make sure the transportation lock is...

Top 
The Scanner Turns Off
This behavior is expected. This product will enter sleep mode after a pe\
riod of time. This setting can not be changed.Top
 
You Cannot Start Epson Scan
Make sure the scanner is turned on.
Turn off the scanner and computer, then check the interface cable connec\
tion between them to make sure it is 
secure.
Use the USB cable that came with your scanner or that is indicated in USB Interface.
Note:
A USB cable is not bundled with the scanner in some areas.
Connect the scanner...

 
Home > Solving Problems 
Automatic Document Feeder Problems
You Cannot Scan Using the ADF 
Paper Jams in the Automatic Document Feeder 
You Cannot Scan Using the ADF
Make sure you have selected either Office Mode or Professional Mode in Epson Scan. See Changing the Scan 
Mode for instructions.
Make sure Auto Detect (Office Mode only) or ADF is selected as the Document Source setting in Epson Scan. 
See Scanning in Office Mode Using the ADF or Scanning in Professional Mode Using the ADF for...

Remove the jammed paper.
Note:
Remove any pages remaining in the input tray.
If more of the paper extends into the output tray, gently pull the paper\
 out in the direction 
shown.