Epson EPL N3000D User Manual
Have a look at the manual Epson EPL N3000D User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
368Functions of the Control Panel ESCP2 Menu This menu allows you to make settings which affect the printer when it is in the ESC/P 2 emulation mode. Font Selects the font. Item Settings (default in bold) FontCourier, Prestige, Roman, Sans Serif, Roman T, Orator S, Sans H, Script, OCR A, OCR B Pitch10, 12, 15 cpi, Prop. CondensedOff, On T. Margin 0.40 ... 0.50 ... 1.50 inches in 0.05-inch increments Text 1... 66... xxxlines CGTablePcUSA, Italic, PcMultilin, PcPortugue, PcCanFrenc, PcNordic, PcTurkish2, PcIcelandic, PcE.Europe, BpBRASCII, BpAbicomp, Roman-8, PcEur858, ISO Latin1, 8859-15ISO, PcSl437, PcTurkish1, 8859-9 ISO, Mazowia, CodeMJK, PcGk437, PcGk851, PcGk869, 8859-7 ISO, PcCy855, PcCy866, PcUkr866, PcLit771, Bulgarian, Hebrew7, Hebrew8, PcHe862, PcAr864, PcAr864Ara, PcAr720, PcLit774, Estonia, ISO Latin2, PcLat866 CountryUSA, France, Germany, UK, Denmark, Sweden, Italy, Spain1, Japan, Norway, Denmark2, Spain2, LatinAmeric, Korea, Legal Auto CROn, Off Auto LFOff, On Bit ImageDark, Light, BarCode ZeroChar0, (or the zero character with a slash)
Functions of the Control Panel369 B B B B B B B B B B B B Pitch Selects the pitch (the horizontal spacing) of the font in fixed pitch, measured in cpi (characters per inch). You can also choose proportional spacing. Condensed Turns condensed printing on or off. T. Margin Sets the distance from the top of the page to the baseline of the first printable line. The distance is measured in inches. The smaller the value, the closer the printable line is to the top. Text Sets the page length in lines. For this option, a line is assumed to be 1 pica (1/6 inch). If you change the Orientation, Page Size, or T. Margin settings, the page length setting automatically returns to the default for each paper size. CG Table Use the character generator (CG) table option to select the graphics character table or the italics table. The graphics table contains graphic characters for printing lines, corners, shaded areas, international characters, Greek characters, and mathematical symbols. If you select Italic, the upper half of the character table is defined as italic characters. Country Use this option to select one of the fifteen international symbol sets. See “International character sets” on page 413 for samples of the characters in each country’s symbol set.
370Functions of the Control Panel Auto CR Specifies whether the printer performs a carriage-return/line-feed (CR-LF) operation whenever the printing position goes beyond the right margin. If you select Off, the printer does not print any characters beyond the right margin and does not perform any line wrapping until it receives a carriage-return character. This function is handled automatically by most applications. Auto LF If you select Off, the printer does not send an automatic line-feed (LF) command with each carriage-return (CR). If On is selected, a line-feed command is sent with each carriage-return. Select On if your text lines overlap. Bit Image The printer is able to emulate the graphics densities set with the printer commands. If you select Dark, the bit image density is high, and if you select Light, the bit image density is low. If you select BarCode, the printer converts bit images to bar codes by automatically filling in any vertical gaps between dots. This produces unbroken vertical lines that can be read by a bar code reader. This mode will reduce the size of the image being printed, and may also cause some distortion when printing bit image graphics. ZeroChar Specifies whether the printer prints a slashed or unslashed zero.
Functions of the Control Panel371 B B B B B B B B B B B B FX Menu This menu allows you to make settings which affect the printer when it is in the FX emulation mode. Font Selects the font. Pitch Selects the pitch (the horizontal spacing) of the font in fixed pitch, measured in cpi (characters per inch). You can also choose proportional spacing. Item Settings (default in bold) FontCourier, Prestige, Roman, Sans Serif, Script, Orator S, OCR A, OCR B Pitch10, 12, 15 cpi, Prop. CondensedOff, On T. Margin 0.40 ... 0.50 ... 1.50 inches in 0.05-inch increments Text 1... 66... xxxlines CGTablePcUSA, Italic, PcMultilin, PcPortugue, PcCanFrenc, PcNordic, PcTurkish2, PcIcelandic, PcE.Europe, BpBRASCII, BpAbicomp, Roman-8, PcEur858, ISO Latin1, 8859-15ISO CountryUSA, France, Germany, UK, Denmark, Sweden, Italy, Spain1, Japan, Norway, Denmark2, Spain2, LatinAmeric Auto CROn, Off Auto LFOff, On Bit ImageDark, Light, BarCode ZeroChar0, (or the zero character with a slash)
372Functions of the Control Panel Condensed Turns condensed printing on or off. T. Margin Sets the distance from the top of the page to the baseline of the first printable line. The distance is measured in inches. The smaller the value, the closer the printable line is to the top. Text Sets the page length in lines. For this option, a line is assumed to be 1 pica (1/6 inch). If you change the Orientation, Page Size, or T. Margin settings, the page length setting automatically returns to the default for each paper size. CG Table Use the character generator (CG) table option to select the graphics character table or the italics table. The graphics table contains graphic characters for printing lines, corners, shaded areas, international characters, Greek characters, and mathematical symbols. If you select Italic, the upper half of the character table is defined as italic characters. Country Use this option to select one of the fifteen international symbol sets. See “International character sets” on page 413 for samples of the characters in each country’s symbol set.
Functions of the Control Panel373 B B B B B B B B B B B B Auto CR Specifies whether the printer performs a carriage-return/line-feed (CR-LF) operation whenever the printing position goes beyond the right margin. If you select Off, the printer does not print any characters beyond the right margin and does not perform any line wrapping until it receives a carriage-return character. This function is handled automatically by most applications. Auto LF If you select Off, the printer does not send an automatic line-feed (LF) command with each carriage-return (CR). If On is selected, a line-feed command is sent with each carriage-return. Select On if your text lines overlap. Bit Image The printer is able to emulate the graphics densities set with the printer commands. If you select Dark, the bit image density is high, and if you select Light, the bit image density is low. If you select BarCode, the printer converts bit images to bar codes by automatically filling in any vertical gaps between dots. This produces unbroken vertical lines that can be read by a bar code reader. This mode will reduce the size of the image being printed, and may also cause some distortion when printing bit image graphics. ZeroChar Selects whether the printer prints a slashed or unslashed zero. I239X Menu The I239X mode emulates IBM® 2390/2391 Plus commands.
374Functions of the Control Panel These settings are available only when the printer is in the I239X mode. Font Selects the font. Pitch Selects the pitch (the horizontal spacing) of the font in fixed pitch, measured in cpi (characters per inch). You can also choose proportional spacing. Code Page Selects the character tables. Character tables contain the characters and symbols used by different languages. The printer prints text based on the selected character table. Item Settings (default in bold) FontCourier, Prestige, Gothic, Orator, Script, Presentor, Sans Serif Pitch10, 12, 15, 17, 20, 24 cpi, Prop. Code Page437, 850, 858, 860, 863, 865 T. Margin 0.30 ... 0.40 ...1.50 inches in 0.05-inch increments Text 1 ... 67... xxxlines Auto CROff, On Auto LFOff, On Alt. GraphicsOff, On Bit ImageDark, Light ZeroChar0, (or the zero character with a slash) CharacterSet1, 2
Functions of the Control Panel375 B B B B B B B B B B B B T. Margin Sets the distance from the top of the page to the baseline of the first printable line. The distance is measured in inches. The smaller the value, the closer the printable line is to the top. Text Sets the page length in lines. For this option, a line is assumed to be 1 pica (1/6 inch). If you change the Orientation, Page Size, or T. Margin settings, the page length setting automatically returns to the default for each paper size. Auto CR Specifies whether the printer performs a carriage-return/line-feed (CR-LF) operation whenever the printing position goes beyond the right margin. If this setting is off, the printer does not print any characters beyond the right margin and does not perform any line wrapping until it receives a carriage-return character. This function is handled automatically by most applications. Auto LF If you select Off, the printer does not send an automatic line-feed (LF) command with each carriage-return (CR). If On is selected, a line-feed command is sent with each carriage-return. Select On if your text lines overlap. Alt.Graphics Turns the Alternate Graphics option on or off. Bit Image The printer is able to emulate the graphics densities set with the printer commands. If you select Dark, the bit image density is high, and if you select Light, the bit image density is low.
376Functions of the Control Panel If you select BarCode, the printer converts bit images to bar codes by automatically filling in any vertical gaps between dots. This produces unbroken vertical lines that can be read by a bar code reader. This mode will reduce the size of the image being printed, and may also cause some distortion when printing bit image graphics. ZeroChar Selects whether the printer prints a slashed or unslashed zero. CharacterSet Selects character table 1 or 2. Support Menu Enter the Support Mode by pressing the Down button while turning the printer on, to make the Support Menu appears. LCD Backlight Set the LCD control setting. When Auto is selected, the printer controls the backlight of the LCD panel automatically. When the printer is in sleep mode, the backlight is off. When On is selected, the LCD backlight is always on. HDD format Formats the Hard Disk Drive in the printer, if one is installed. PS3 HDD Init Initializes the hard disk drive area where PostScript information is stored, if both PostScript 3 and a hard disk drive are installed.
Working with Fonts377 C C C C C C C C C C C C Appendix C Working with Fonts Available Fonts The following table lists the fonts that are installed in your printer. The names of all the fonts appear in your application software’s font list if you are using the driver provided with the printer. If you are using a different driver, all of these fonts may not be available. The fonts provided with the printer are shown below, according to the emulation mode. LJ4/GL2 mode Font Name Family HP Equivalent Courier Medium, Bold, Italic, Bold Italic Courier ITC Zapf Dingbats - ITC Zapf Dingbats CG Times Medium, Bold, Italic, Bold Italic CG Times CG Omega Medium, Bold, Italic, Bold Italic CG Omega Coronet - Coronet Clarendon Condensed - Clarendon Condensed Univers Medium, Bold, Medium Italic, Bold ItalicUnivers Univers Condensed Medium, Bold, Medium Italic, Bold ItalicUnivers Condensed