Epson Aculaser M2010D User Manual

							About the Printer Software for Windows131
For Windows XP or XP x64, select Browse for a printer.
For Windows Vista or Vista x64, click Select a shared printer by name in the dialog box that 
appears, then click Next.
5. For Windows XP, XP x64, 2000, Server 2003, Server 2003 x64, click the icon of the computer or 
server that is connected to the shared printer, and the name of the shared printer, then click 
Next.
Note for Windows Vista users:
When the dialog box to enter user name and password appears, enter the information about the print 
server, then click the name of the shared printer. When the Add Printer dialog box appears, click Next.
Note:
❏The name of the shared printer may be changed by the computer or server that is connected to the 
shared printer. To make sure of the name of the shared printer, ask the administrator of the network.
 
						

							About the Printer Software for Windows132
❏If the printer driver is installed in the client beforehand, you need to select either the new printer 
driver or the current printer driver. When the prompt to select the printer driver appears, select the 
printer driver according to the message.
❏If the additional driver for the corresponding Windows is installed in the print server, go to the next 
step.
6. Select whether to use the printer as the default printer or not, then click Next.
7. Make sure of the settings, then click Finish.
Installing the printer driver from the CD-ROM
This section describes how to install the printer driver in the clients when setting the network 
system without installing the additional drivers in the print server.
The on-screen displays on the following pages may differ depending on the version of Windows 
OS.
Note:
❏When installing in Windows XP, XP x64, or 2000 clients, you must access Windows XP, XP x64, or 
2000 as the Administrator.
❏For Windows Vista or Vista x64, even if you are not an administrator or power user, you can install the 
printer driver by clicking Continue when the prompt to continue the installation appears.
❏If the additional drivers are installed or the computers of the server and clients use the same OS, you do 
not have to install the printer drivers from the CD-ROM.
1. Access the shared printer and a prompt may appear. Click OK, then follow the on-screen 
instructions to install the printer driver from the CD-ROM.
 
						

							About the Printer Software for Windows133
2. Insert the CD-ROM, type the appropriate drive and folder names in which the printer driver for 
clients is located, then click OK.
When installing drivers, “Digital Signature is not found.” may appear. Click Yes (for Windows 
2000) or Continue Anyway (for Windows Vista, Vista x64, XP, XP x64, Server 2003, or Server 
2003 x64) and continue installing.
The folder name differs depending on the OS being used.
3. Select the name of the printer, click OK, then follow the on-screen instructions.
Client’s OS Folder Name
Windows Vista, XP, or 2000\\WINVISTA_XP_2K
Windows Vista x64 or XP x64 \\VISTA_XP64
 
						

							About the Printer Software for Macintosh134
Chapter 8 
About the Printer Software for Macintosh
Using the Printer Driver
The printer driver is the software that allows you to adjust printer settings to get the best results.
Note:
❏The printer driver’s online help provides details on printer driver settings.
❏You have to re-install the printer driver after major operating system updates such as OSX 10.3 to 10.4, 
but you do not have to re-install it for minor updates such as 10.3.1 to 10.3.2.
Accessing the printer driver
You can access the printer driver directly from any application programs, and from your Windows 
operating system.
Mac OS X
Register your printer in Printer Setup Utility (for Mac OS X 10.3 and 10.4) or Print Center (for Mac 
OS X 10.2), click Print on the File menu of any application, then select your printer.
From an application
❏To open the Paper Setting dialog box, select Page Setup from th e Fil e men u on  a ny appl ica tion.
❏To open the Basic Settings tab, select Print from the File menu on any application.
Changing the Printer Settings
You can change the printer settings, such as paper source, paper type, and print quality.
Open the Print dialog box and select Printer Settings from the drop-down list, then select the 
Basic Settings tab.
Making Extended Settings
You can make various settings in the Extended Settings dialog box, for example Page Protect.
 
						

							About the Printer Software for Macintosh135
Open the Print dialog box and select Printer Settings from the drop-down list, then select the 
Extended Settings tab.
Using EPSON Status Monitor
EPSON Status Monitor is a utility program that monitors your printer and gives you information 
about its current status.
Accessing EPSON Status Monitor
For Mac OS X users
Note:
After installing the EPSON Status Monitor and before doing the procedure below, you need to open the Print 
dialog box so the EPSON Status Monitor can display the current status of the printer.
1. Open the Applications folder on your hard disk drive, then open the Utilities folder.
2. Double-click the Printer Setup Utility (for Mac OS X 10.3 and 10.4) or Print Center (for Mac OS 
X 10.2) icon.
3. Select your printer from the Name list and click the Utility (for Mac OS X 10.3 and 10.4) or 
Configure (for Mac OS X 10.2) icon in the Printer List dialog box.
Note:
You can also access EPSON Status Monitor by clicking the EPSON Status Monitor icon in the Dock.
 
						

							About the Printer Software for Macintosh136
*You can also access any of the menus by clicking the appropriate tab on each information window.
Detailed Status
Simple  Status You can check the type of errors and a possible solution. This window 
appears when an error or warning occurs, and closes automatically 
once the problem is cleared.
Detailed Status
*You can monitor detailed printer status. When a problem occurs, the 
most probable solution is displayed. See “Detailed Status” on page 
136.
Consumables 
Information
*You can obtain information on paper sources and consumable 
products. See “Consumables Information” on page 137.
Job Information
*You can check print job information. See “Job Information” on page 
137.
Notice Settings You can make specific monitoring settings. Access EPSON Status 
Monitor and select Notice Settings from the file menu. See “Notice 
Settings” on page 138.
 
						

							About the Printer Software for Macintosh137
Consumables Information
Note:
The remaining service life of the toner cartridge is displayed only if the genuine EPSON toner cartridge is 
used.
Job Information 
a. Paper: Displays the paper size, the paper type and the approximate amount 
of paper remaining in the paper source.
b. Toner: Indicates the remaining service life of the toner cartridge. The toner 
icon flashes when the toner cartridge has some error or has neared 
the end of its service life.
 
						

							About the Printer Software for Macintosh138
Notice Settings
a. Job Name: Displays the user’s print job names. Other user’s print jobs are displayed 
as --------.
b. Status: Waiting: Indicates the print job is waiting to be printed.
Spooling: Indicates the print job is being spooled on your 
computer.
Deleting: Indicates the print job is being deleted.
Printing: Indicates the print job is printed currently.
Completed: Indicates the print job has been finished.
Canceled: Indicates the print job has been cancelled.
c. User: Displays the user name.
d. Computer: Displays the name of the computer that sent the print job.
e. Cancel Job 
button:Cancels the selected print job. You can only cancel the jobs you send.
f. Refresh button: Refreshes the information on this menu.
g. Display 
Settings 
button:Displays the Display Settings dialog box to select items to be displayed.
a. Printer drop-down list: Select your printer from the drop-down list.
 
						

							About the Printer Software for Macintosh139
Uninstalling the Printer Software
For Mac OS X users
1. Quit all applications on the computer.
2. Insert the EPSON printer software CD-ROM in your Macintosh.
3. Double-click the Mac OS X folder.
4. Double-click the Printer Driver folder.
5. Double-click your printer’s icon.
Note:
If the Authorization dialog box appears, enter the Password or phrase, then click OK.
6. When the software license agreement screen appears, read the statement, click Continue, then 
click Agree.
7. Select Uninstall from the menu at the upper left, then click Uninstall.
8. Follow the on-screen instructions.
b. Monitor the printing status 
check box:When this check box is selected, EPSON Status Monitor 
monitors the printer status during a print job is processed.
c Pop-up Notice: Sets the notification to be displayed.
d. Monitor Settings button: Opens the Monitor Settings dialog box to set the 
monitoring interval.
e. OK button: Saves the settings and exit the dialog box.
f. Cancel button: Exits the dialog box without saving the settings.
g. Save button: Saves new changes and closes the dialog box.
 
						

							About the Printer Software for Macintosh140
Sharing the Printer on a Network
Sharing the Printer
This section describes how to share the printer on an AppleTalk network.
The computers on the network can share the printer that is directly connected to one of them. The 
computer that is directly connected to the printer is the print server, and the other computers are 
the clients which need permission to share the printer with the print server. The clients share the 
printer via the print server.
For Mac OS X users
Use the Printer Sharing setting, which is a standard feature of Mac OS X 10.2 or later.
See your operating system’s documentation for details.