Epson AcuLaser C9100 User Manual
Have a look at the manual Epson AcuLaser C9100 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Maintenance and Transportation241 7 7 7 7 7 7 7 7 7 7 7 7 Waste Toner Collector Handling precautions Always observe the following handling precautions when replacing the consumable products. Do not reuse toner found in the waste toner collector. w Warning: ❏Do not dispose of the used consumable products in fire, as it may explode and cause injury. Dispose of it according to local regulations. ❏Keep the consumable products out of the reach of children. Replacing the waste toner collector Follow the steps below to replace the waste toner collector. 1. Open cover A.
242Maintenance and Transportation 2. Hold the waste toner collector and draw it out as shown below. When drawing out the waste toner collector, firmly pull it since it has a drag resistance. Take care not to pull it too strongly as it could cause you to fall down. Note: When placing the waste toner collector that is removed, stand it on a flat surface as shown below to prevent the toner content from spilling out.
Maintenance and Transportation243 7 7 7 7 7 7 7 7 7 7 7 7 3. Install a new waste toner collector to the printer as shown below. Note: If the waste toner collector is not installed correctly, cover A may not be closed or an error massage will be displayed on the LCD panel. Make sure the waste toner collector is correctly installed in the frame of the printer.
244Maintenance and Transportation 4. Close cover A. w Warning: Take care not to get your finger caught in the metal part inside cover A when closing it.
245 Cleaning the Printer The printer needs only minimal cleaning. If the printer’s outer case is dirty or dusty, turn off the printer and clean it with a soft, clean cloth moistened with a mild detergent. c Caution: Never use alcohol or paint thinner to clean the printer cover. These chemicals can damage the components and the case. Be careful not to get water onto the printer mechanism or any electrical components. Cleaning the pickup roller If the paper jam occurs frequently, wipe the pickup roller with a clean dampened cloth. Follow the steps below to clean the pickup roller.
246 1. Pull out the standard lower cassette until it stops. 2. Thoroughly wipe the rubber parts of the pickup roller in the standard lower cassette with a dry cloth. * pickup roller *
247 Transporting the Printer For long distances If you need to transport your printer for long distances, carefully repack it using the original box and packing materials. Follow the steps below to repack your printer. 1. Turn off the printer. 2. Unplug the power cord from the electrical outlet. 3. Remove all installed options. For information on removing options, see the section under Installing Options. 4. Attach the protective materials to the printer, then repack the printer in its original box. After replacing or setting up your printer at the new location, you need to check the color registration and adjust the color alignment if necessary. For details, see “Checking color registration” on page 251. For short distances Always pay attention to the following handling precautions when you need to move the printer for short distances. If you are moving the printer on its own, two people should lift and carry the printer. Follow the steps below to move the printer for short distances.