Epson AcuLaser C9100 User Manual
Have a look at the manual Epson AcuLaser C9100 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Installing Options191 6 6 6 6 6 6 6 6 6 6 6 6 Chapter 6 Installing Options Optional Paper Cassette Unit For the paper types and sizes that you can use with the optional paper cassette unit, see “Optional paper cassette unit” on page 33. Handling precautions Always pay attention to the following handling precautions before installing the option: ❏The 500-sheet Paper Cassette Unit A3 weighs approximately 12 kg (26.4 lb). The 1500-sheet Paper Cassette Unit A3 weighs approximately 31 kg (68.2 lb); always lift it with two people. ❏The printer weighs about 55 kg (121 lb). One person should never attempt to lift or carry it alone. Three or more people should carry the printer. *
192Installing Options* heavier on this side w Warning: If you lift the printer incorrectly, you could drop it and cause injury. Installing the optional paper cassette unit Follow the steps below to install the optional 1500-sheet Paper Cassette Unit A3. Note: The procedure for installing the 500-sheet Paper Casette Unit is the same as that for the 1500-sheet Paper Casette Unit A3 unless otherwise specified.
Installing Options193 6 6 6 6 6 6 6 6 6 6 6 6 1. Turn the printer off and unplug the power cord. 2. Make sure that the connector cable for the optional paper cassette unit is outside the unit.
194Installing Options 3. Place the printer onto the optional paper cassette unit. Lift the printer from the positions shown below, and align each of the printer’s corners with those of the unit, then lower the printer until it rests securely on the unit. * heavier on this side *
Installing Options195 6 6 6 6 6 6 6 6 6 6 6 6 4. Lock the two casters at the front of the unit. For 500-sheet Paper Cassette Unit A3, secure the printer to the unit with the fittings provided. w Warning: Be sure to lock both casters before installing the unit on the printer. Otherwise, the unit may move and cause an accident. 5. Pull out the top paper cassette from the unit, and then secure the printer to the unit with the two screws provided. 6. Reinstall the removed cassette to the printer. 1500-sheet Paper Cassette Unit A3 500-sheet Paper Cassette Unit A3
196Installing Options 7. Plug the unit’s connector into the printer. 8. Attach the connector cover to the unit. For 500-sheet Paper Cassette Unit A3, proceed to step 10. 9. Attach the cord hook to the unit with the two screws provided.
Installing Options197 6 6 6 6 6 6 6 6 6 6 6 6 10. Plug the power cord into the printer by winding it around the hook as shown below, then turn the printer on. To confirm that the option is installed correctly, print a Status Sheet. See “Printing a Status Sheet” on page 276. Note for Windows users: If you are using Windows, and EPSON Status Monitor 3 is not installed, you have to make settings manually in the printer driver. See “Making Optional Settings” on page 83. Note for Macintosh users: When you have attached or removed printer options, you need to delete the printer using Print Setup Utility (for Mac OS X 10.3), Print Center (for Mac OS X 10.2 or below), or Chooser (for Mac OS 9), and then re-register the printer. Removing the optional paper cassette unit Follow the steps below to remove the optional paper cassette unit. 1. Turn the printer off and unplug the power cord. 2. Perform the installation procedure in reverse.
198Installing Options Duplex Unit For the paper types and sizes that you can use with the Duplex Unit, see “Paper Sources” on page 31 or “Printing on Special Media” on page 45. For specifications, see “Duplex Unit” on page 333. Installing the Duplex Unit Follow the steps below to install the optional Duplex Unit. 1. Turn the printer off and unplug the power cord.
Installing Options199 6 6 6 6 6 6 6 6 6 6 6 6 2. Open the MP tray, and remove the protective cover (gray tape) on the left of the printer as shown below. 3. Insert the left and right projections of the Duplex Unit into the openings of the printer. Then press down the Duplex Unit. Note: If the line of the Duplex Unit matches that of the printer as shown below, the Duplex Unit is correctly installed.
200Installing Options 4. Open cover D of the Duplex Unit. Then lift the green lever and secure the Duplex Unit with the two screws provided. 5. Lower the lever to its original position, and close cover D of the Duplex Unit. 6. Remove the small plastic cover on the left of the printer by pressing the cover stopper and pulling it.