Epson AcuLaser C2800DTN User Manual

							AcuLaser C2800 Series Users Guide
Using the Printer Software with Windows91
After the last page is output, the Ready (green) light on the printer turns on.
The current job is canceled.
Note:
You can also cancel the current print job that is sent from your computer, by pressing the +Cancel Job 
button on the printer’s control panel. When canceling the print job, be careful not to cancel print jobs sent by 
other users.
Uninstalling the Printer Software
When you wish to reinstall or upgrade the printer driver, be sure to uninstall the current printer 
software beforehand.
Uninstalling the printer driver
Note:
The illustrations in this section show Windows XP screens. They may be different from the screens for your 
operating system.
1. Quit all applications.
2. For Windows Vista, click Start, then click Control Panel.
For Windows XP, XP x64, Server 2003, or Server 2003 x64, click Start, click Control Panel, then 
click Add or Remove Programs. 
For Windows 2000, click Start, point to Settings, then click Control Panel.
3. For Windows Vista, double-click the Programs and Features icon.
For Windows XP, XP x64, Server 2003, or Server 2003 x64, click the Change or Remove 
Programs icon.
For Windows 2000, double-click the Add/Remove Programs icon.
 
						

							AcuLaser C2800 Series Users Guide
Using the Printer Software with Windows92
4. For Windows Vista, select EPSON Printer Software, then click Uninstall/Change.
For Windows XP, XP x64, 2000, Server 2003, or Server 2003 x64, select EPSON Printer 
Software, then click Change/Remove.
5. Click the Printer Model tab, select your printer’s icon.
6. Click the Utility tab, and confirm that the check box for the printer software you want to 
uninstall is selected.
 
						

							AcuLaser C2800 Series Users Guide
Using the Printer Software with Windows93
Note:
If you wish to uninstall only EPSON Status Monitor, select the EPSON Status Monitor check box.
7. To uninstall, click OK.
Note:
You can uninstall EPSON Network Utility. When the utility is uninstalled, you cannot display the 
printer status from EPSON Status Monitor of other printers.
8. Follow the on-screen instructions.
Sharing the Printer on a Network
Sharing the printer
This section describes how to share the printer on a standard Windows network.
The computers on a network can share a printer that is directly connected to one of them. The 
computer that is directly connected to the printer is the print server, and the other computers are 
the clients which need permission to share the printer with the print server. The clients share the 
printer via the print server.
According to the versions of Windows OS and your access rights on the network, perform the 
appropriate settings of the print server and clients.
Setting the print server
See “Using an additional driver” on page 94.
Setting the clients
See “With Windows Vista, Vista x64, XP, XP x64, or 2000” on page 98.
Note:
❏From Windows Me or 98 clients, you cannot access the printer shared by the Windows Vista or Vista 
x64 print server.
❏From Windows Vista or Vista x64 clients, you cannot access the printer shared by the Windows Me or 
98 print server.
❏When sharing the printer, be sure to set EPSON Status Monitor so that the shared printer can be 
monitored on the print server. See “Notice Settings” on page 86.
 
						

							AcuLaser C2800 Series Users Guide
Using the Printer Software with Windows94
❏The print server and clients should be set on the same network system, and they should be under the same 
network management beforehand.
Using an additional driver
When the print server’s OS is Windows Vista, Vista x64, XP, XP x64, 2000, Server 2003, or Server 
2003 x64, you can install the additional drivers on the server. The additional drivers are for client 
computers that have different OS from the server.
Follow the steps below to set a Windows Vista, Vista x64, XP, XP x64, 2000, Server 2003, or Server 
2003 x64 as a print server, then install the additional drivers.
Note:
You must access Windows XP, XP x64, 2000, Server 2003, or Server 2003 x64 as the Administrators of the 
local machine.
1. For a Windows Vista or Vista x64 print server, click Start, click Control Panel, then 
double-click Printers.
For a Windows XP, XP x64, Server 2003, or Server 2003 x64 print server, click Start, point to 
Printers and Faxes.
For a Windows 2000 print server, click Start, point to Settings, then click Printers.
2. Right-click your printer’s icon, then click Sharing in the menu that appears.
For Windows Vista, click Change sharing options, then click Continue.
For Windows XP, XP x64, Server 2003, or Server 2003 x64, if the following menu appears, click 
either Network Setup Wizard or If you understand the security risks but want to share 
printers without running the wizard, click here.
In either case, follow the on-screen instructions.
 
						

							AcuLaser C2800 Series Users Guide
Using the Printer Software with Windows95
3. For a Windows Vista, Vista x64, XP, XP x64, Server 2003, or Server 2003 x64 print server, select 
Share this printer, then type the name in the Share name box.
Note:
Do not use spaces or hyphens for the Share name, or an error may occur.
For a Windows 2000 print server, select Shared as, then type the name in the Share Name box.
4. Select the additional drivers.
Note:
If the computers of the server and clients use the same OS, you do not have to install the additional 
drivers. Just click OK after step3.
 
						

							AcuLaser C2800 Series Users Guide
Using the Printer Software with Windows96
On the Windows XP, XP x64, 2000, Server 2003, or Server 2003 x64 print server
Click Additional Drivers.
Select Windows being used for clients, then click OK.
 
						

							AcuLaser C2800 Series Users Guide
Using the Printer Software with Windows97
*The additional driver for Windows XP x64 and Server 2003 x64 can be used on Windows XP Service Pack 2, Windows 
2003 Service Pack 1, or later.
Note:
❏You do not have to install the additional drivers noted below, because these drivers are preinstalled. 
Intel Windows 2000 (for Windows 2000)
Intel Windows 2000 or XP (for Windows XP)
x86 Windows 2000, Windows XP and Windows Server 2003 (for Windows Server 2003)
x64 Windows XP and Windows Server 2003 (for Windows XP x64 or Windows Sever 2003 x64 
edition)
x86 Type 3 - User Mode (for Windows Vista, XP, 2000, Server 2003 clients)
x64 Type 3 - User Mode (for Windows Vista x64, XP x64 or Server 2003 x64 clients)
❏Do not select additional drivers other than the drivers listed in the above table. The other additional 
drivers are not available.
Server Name Client OS Driver
Windows 2000 Windows XP or 2000 clients Intel Windows 2000
Windows XP
*Windows XP or 2000 clients Intel Windows 2000 or XP
Windows XP x64 clients x64 Windows XP
Windows XP x64, Server 
2003, or Server 2003 x64
*Windows XP or 2000 clients x86 Windows 2000, Windows XP 
and Windows Server 2003
Windows XP x64 clients x64 Windows XP and Windows 
Server 2003
Windows Vista, Vista x64 Windows Vista, XP, 2000, Server 2003 
clientsx86 Type 3 - User Mode
Windows Vista x64, XP x64 or Server 2003 
x64 clientsx64 Type 3 - User Mode
 
						

							AcuLaser C2800 Series Users Guide
Using the Printer Software with Windows98
Setting up clients
This section describes how to install the printer driver by accessing the shared printer on a 
network.
Note:
❏To share the printer on a Windows network, you need to set the print server. For details, see “Using an 
additional driver” on page 94.
❏This section describes how to access the shared printer on a standard network system using the server 
(Microsoft workgroup). If you cannot access the shared printer due to the network system, ask the 
administrator of the network for assistance.
❏This section describes how to install the printer driver by accessing the shared printer from the Printers 
folder. You can also access the shared printer from Network, Network Neighborhood, or My Network on 
the Windows desktop.
❏You cannot use the additional driver on the server system OS.
❏When you want to use EPSON Status Monitor at a client, you have to install EPSON Status Monitor 
from the CD-ROM with administrator privileges in each client.
❏For Windows Vista, if you want to monitor a shared printer with several users on a client computer, 
select the Allow monitoring of the shared printers check box in EPSON Status Monitor.
With Windows Vista, Vista x64, XP, XP x64, or 2000
Follow the steps below to set Windows Vista, Vista x64, XP, XP x64, or 2000 clients.
You can install the printer driver for the shared printer, if you have Power Users or more powerful 
access rights even if you are not the Administrator.
For Windows Vista or Vista x64, even if you are not an administrator or power user, you can install 
the printer driver by clicking Continue when the prompt to continue the installation appears.
Note:
The illustrations in this section show Windows XP screens. They may be different from the screens for your 
operating system.
1. For Windows 2000 clients, click Start, point to Settings, and click Printers.
For Windows XP or XP x64 clients, click Start, point to Printers and Faxes.
For Windows Vista or Vista x64 clients, click Start, click Control Panel, then double-click 
Printers.
 
						

							AcuLaser C2800 Series Users Guide
Using the Printer Software with Windows99
2. For Windows 2000, double-click the Add Printer icon, then click Next.
For Windows XP or XP x64 click Add a printer in the Printer Tasks menu.
For Windows Vista or Vista x64, click Add a printer in the menu bar.
3. For Windows 2000, select Network printer, then click Next.
For Windows XP or XP x64, select A network printer, or a printer attached to another 
computer, then click Next.
For Windows Vista or Vista x64, click Add a network, wireless or Bluetooth printer. If the 
shared printer is found automatically, proceed to step 5. If not, click stop and click The printer 
that I want isn’t listed, then go to step 4.
4. For Windows 2000, type the name of the shared printer, then click Next.
Note:
❏You can also type “\\(the name of the computer that is locally connected to the shared 
printer)\(the shared printer’s name)” in network path or queue name.
❏You do not necessarily need to type the name of the shared printer.
 
						

							AcuLaser C2800 Series Users Guide
Using the Printer Software with Windows100
For Windows XP or XP x64, select Browse for a printer.
For Windows Vista or Vista x64, click Select a shared printer by name in the dialog box that 
appears, then click Next.
5. For Windows XP, XP x64, 2000, Server 2003, Server 2003 x64, click the icon of the computer or 
server that is connected to the shared printer, and the name of the shared printer, then click 
Next.
Note for Windows Vista users:
When the dialog box to enter user name and password appears, enter the information about the print 
server, then click the name of the shared printer. When the Add Printer dialog box appears, click Next.
Note:
❏The name of the shared printer may be changed by the computer or server that is connected to the 
shared printer. To make sure of the name of the shared printer, ask the administrator of the network.