Epson Aculaser C1700 User Manual

Each menu item has a list of values for the menu item. A value can be:
❏A phrase or word to describe a setting
❏A numerical value that can be changed
❏An On or Off setting
4. Select the desired value, and then click the associated button with each menu item.
Driver settings may have precedence over changes previously made and may require you to
change the Printer Setting Utility defaults.
Epson AcuLaser C1700 Series     User’s Guide
Printing Basics     61
 

Chapter 6
Using the Operator Panel
Resetting to Factory Defaults
After Initializing the Non-Volatile Memory (NVM) and rebooting the printer, all the menu
parameters or data are reset to their factory default values.
1. Turn off the printer.
2. Open the rear door.
3. While holding down the 
 (Start) button and the  (Cancel Job) button at the same time, turn
on the printer.
4. After the 
 (Start),  (Energy Saver), and  (Error) indicators go out, release the  (Start)
button and 
 (Cancel Job) button.
5....

Off On Blink
—
—
1
2
3
4
5 6 7
Common Light Sequences
The following table shows the most common light status.
1234567Printer Status
Toner Energy
SaverJam Start Error Load
PaperReady/
Data
——————
Ready
——————
Processing
——————
Printing
—
————Canceling a print job
——————
Calibrating
——————
Warming up
——————
Waiting for incoming data
——————
Initializing NVM
Epson AcuLaser C1700 Series     User’s Guide
Using the Operator Panel     63
 

1234567Printer Status
Toner Energy
SaverJam Start Error Load
PaperReady/
Data
——————
On Diagnosis when starting
—
—————In Power Saver Mode
———
——Waiting for manual duplex
printing. *1
*1 Load paper for the second side (odd) pages, and press the  (Start) button. See “Manual Duplex Printing (Windows Print
Driver Only)” on page 46.
Warnings
The following table shows the warning conditions. You can continue printing even though the
warning appears.
1 234567Printer Status
Toner Energy
SaverJam Start Error...

1 234567Printer Status
Toner Energy
SaverJam Start Error Load
PaperReady/
Data
YMCK
——
——————*2The cyan toner is
empty.*4
————— — ——*2The Color Toner
Density (CTD)
sensor is dirty, or
the product is
near the end of its
service life (30%
remains).
*5
*1 When another error occurs,  (Error) indicator lights up and the toner indicators do not light up.
*2 The  (Ready/Data) indicator blinks or lights up green depending on the printer status.
*3 This warning appears only when Epson toner cartridges are used...

1 234567Cause/Remedy
Toner Energy
SaverJam Start Error Load
PaperReady/
Data
YMCK
————— —
—No paper is
loaded.
Load paper and
press the 
(Start) button.
See “Loading Print
Media” on
page 36.
—————
———Paper jam
occurred.
See “Clearing
Jams” on
page 71.
————— — —
——The rear door is
open.
Close the rear
door.
————— —
— The wrong size of
paper is loaded.
See “Loading Print
Media” on
page 36.
————— — —
——An error occurred.
Press and hold the
 (Start) button
to display the
secondary error
light sequences....

1 234567Cause/Remedy
Toner Energy
SaverJam Start Error Load
PaperReady/
Data
YMCK
——————— — The specified
toner cartridge is
not installed or
not installed
correctly.
Re-install the
specified toner
cartridge.
See “Installing a
Toner Cartridge”
on page 110. —
———————
——
——————
———
—————
——————— — The specified
toner cartridge is
empty or invalid.
Replace the
specified toner
cartridge.
See “Replacing
Toner Cartridges”
on page 107. —
———————
——
——————
———
—————
——————— — The density of the
specified toner...

1 234567Cause/Remedy
Toner Energy
SaverJam Start Error Load
PaperReady/
Data
YMCK
———
——— Memory overflow
Press the 
(Cancel Job)
button to clear the
message and
cancel the current
print job.
See “Canceling a
Print Job” on
page 50.
——
————Page Description
Language (PDL)
error
Press the 
(Cancel Job)
button to clear the
message and
cancel the current
print job.
See “Canceling a
Print Job” on
page 50.
—
—————Invalid job
environment
The configuration
of the printer set
on the print driver
does not match
the...

1 234567Cause/Remedy
Toner Energy
SaverJam Start Error Load
PaperReady/
Data
YMCK
—————— Color Toner
Density (CTD)
sensor dustiness
Clean the CTD
sensor.
See “Cleaning the
Color Toner
Density (CTD)
Sensor” on
page 105.
Fatal Errors
Contact the Epson local representative office or an authorised dealer if this error occurs repeatedly.
See Also:
“Contacting Epson Support” on page 119
1234567Cause/Remedy
Toner Energy
SaverJam Start Error Load
PaperReady/
Data
————
— — A fatal error occurred.
Turn off the...

See Also:
“Contacting Epson Support” on page 119
1 234567Cause/Remedy
Toner Energy
SaverJam Start Error Load
PaperReady/
Data
YMCK
———
———— A firmware error
occurred.
Press the 
(Cancel Job)
button to clear
the error.
See “Canceling a
Print Job” on
page 50.
——
————A ROM erasing
error occurred.
Turn off the
printer, and then
on.
—
———— A ROM writing
error occurred.
Turn off the
printer, and then
on.
———— An error occurred
while
downloading the
firmware.
Turn off the
printer, and then
on.
Epson AcuLaser...