Epson 915 W Manual

Submenu Function
User ButtonYou can select and assign an item from the Configuration menu
with the remote control's [User] button. Pressing the [User]
button directly displays the assigned menu item selection/
adjustment screen, allowing you to make one-touch changes to
settings/adjustments. You can assign one of the following items
to the [User] button.
Power Consumption, Info, Progressive,Test Pattern,
Resolution, Mic Input Level, and Pattern Display
PatternPattern Display: Display a pattern....

Submenu Function
DisplayYou  can  make  settings  related  to  the  projector's  display.
Messages: When set to Off,  the  following  items  will  not  be
displayed.
Item  names  when  the  Source,  Color  Mode,  or  Aspect  Ratio
is  changed,  messages  when  no  signal  is  being  input,  and
warnings  such  as  High  Temp  Warning.
Display  Background
*1:  You  can  set  the  screen  background
to  Black, Blue, or Logo when  no  image  signal  is  available.
Startup  Screen
*1: Set to On to...

Submenu Function
Plug-in  PowerWhen  set  to  On you  can  use  a  microphone  with  Plug-in
Power  support.
USB  Type  BSet  to  USB  Display when  the  projector  and  a  computer  are
connected  by  a  USB  cable  and  computer  images  are
projected.
s "Projecting  with  USB  Display"  p.32 
Set  to  Wireless  Mouse when  the  mouse  pointer  is  to  be
operated  by  the  Remote  Control.
s "Using  the  Remote  Control  to  Operate  the  Mouse
Pointer  (Wireless  Mouse)"  p.54...

Submenu Function
Network  Config-
urationThe  following  menus  are  available  for  setting  Network
items.
Basic, Wireless  LAN, Security, Wired  LAN, Mail, Others,
Reset,  and  Complete
*Displays  available  region  information  for  the  Wireless  LAN  unit  being  used.
For  more  details,  contact  your  local  dealer  or  the  nearest  address  provided  in
the  Epson  Projector  Contact  List.
s Epson  Projector  Contact  Lista
By  using  a  Web  browser  of  a  computer  connected  to  the...

Basic  menu
Submenu Function
Projector NameDisplays the projector name used to identify the projector when
connected to a network.
When editing, you can enter up to 16 single-byte alphanumeric
characters.
PJLink PasswordSet a password to use when you access the projector using
compatible PJLink software.
You can enter up to 32 single-byte alphanumeric characters.
Web Control
PasswordSet a password to use when making settings and controlling the
projector using Web Control. Enter up to eight single-byte...

Submenu Function
Connection
ModeSet the connection mode when using EasyMP Network
Projection to connect the projector and computer.
This is set to Quick by default.
See the following manual for details on connection mode.
s EasyMP Network Projection Operation Guide
Channel(This can only be set if Connection Mode is set to Quick.)
Select the frequency band used by the wireless LAN from 1ch,
6ch, or 11ch.
This is set to 11ch by default.
Wireless LAN
Sys.Set the Wireless LAN system to either 802.11b/g or...

Security  menu
Submenu Function
SecuritySelect the security type from the items that are displayed.
When setting up Security, follow the instructions from the
administrator of the network system you are about to access.
WEP EncryptionYou can set the encryption for WEP encryption.
128Bit: Uses 128 (104) bit encoding.
64Bit: Uses 64 (40) bit encoding.
FormatYou can set the input method for the WEP encryption key to
ASCII or HEX.
Key IDSelects the WEP encryption ID key.
Submenu Function
Encryption Key...

•WPA
This  is  an  encryption  standard  that  improves  security  which  is  a  weak
point  of  WEP.  Although  there  are  multiple  kinds  of  WPA  encryption
methods,  this  projector  uses  TKIP  and  AES.
WPA  also  includes  user  authentication  functions.  WPA  authentication
provides  two  methods:  using  an  authentication  server,  or  authenticating
between  a  computer  and  an  access  point  without  using  a  server.  This
projector  supports  the  latter  method,  without  a  server.a...

Submenu Function
IP Address Dis-
playTo prevent the IP address from being displayed on Network Info
in the Network Menu and on the LAN Standby screen, set this to
Off.
Mail  menu
When  this  is  set,  you  receive  an  email  notification  if  a  problem  or  warning
occurs  in  the  projector.s
 "Using  the  Mail  Notification  Function  to  Report  Problems"  p.66Submenu Function
Mail NotificationSet to On to send an email to the preset addresses when a problem
or warning occurs with a...

Others  menu
Submenu Function
SNMPSet to On to monitor the projector using SNMP.
To monitor the projector, you need to install the SNMP manager
program on your computer. SNMP should be managed by a
network administrator.
The default value is Off.
Trap IP Address
1/Trap IP Ad-
dress 2You can register up to two IP addresses for the SNMP trap
notification destination. You can enter a number from 0 to 255 in
each field of the address. However, the following IP addresses
cannot be used. 127.x.x.x, 224.0.0.0...