Epson 915 W Manual

Button Function
OKPerforms the same operation as the [Enter] button on
the remote control.
s "Remote Control" p.14
MenuDisplays and closes the Configuration menu.
AutoIf clicked while projecting analog RGB signals from
Computer1 port or Computer2 port, automatically
optimizes the image by adjusting the Tracking, Sync.,
and Position.
SearchSwitches to the image from the input port where video
signals are being input.
s "Automatically Detect Input Signals and Change the
Projected Image (Source...

Item Function
DHCPSelect the Enabled check box to use DHCP. You cannot
enter an IP address if DHCP is enabled.
IP AddressEnter the IP address to assign to the currently connected
projector.
Subnet MaskEnter a subnet mask for the currently connected
projector.
Default GatewayEnter the gateway address for the currently connected
projector.
SendClick this button to confirm the changes made to the
Projector.
C
Admin Password
Select the Enabled check box to require a password to open the Tools window.
The...

Configuration  Menu
This  chapter  explains  how  to  use  the  Configuration  menu  and  its  functions. 

This  section  explains  how  to use  the  Configuration  menu.
Although  steps  are  explained  using  the  remote  control  as  an  example,  you
can  perform  the  same  operations  from  the  control  panel.  Check  the  guide
under  the  menu  for  the  available  buttons  and  their  operations.a
Display  the  Configuration  menu  screen.
b
Select  a  top  menu  item.
ƒ
„
c
Select  a  submenu  item.
ƒ
„
d
Change  settings.
ƒ
ƒ
„
e
Press  the  [Menu]  button  to  finish  making  settings....

Configuration  Menu  Table
Settable  items  vary  depending  on  the  model  being  used  and  the  image
signal  and  source  being  projected.Top  Menu  Name Submenu  Name Items  or  Setting  V alues
Image  menu
s p.77Color  Mode Dynamic,  Presentation,  Theatre,
Photo,  sRGB,  Blackboard,  and
Whiteboard
Brightness -24  to  24
Contrast -24  to  24
Color  Saturation -32  to  32
Tint -32  to  32
Sharpness -5  to  5
Abs.  Color  Temp. 5000K  to  10000K
Color  Adjustment R:  -16  to  16
G:  -16  to  16
B:...

Top  Menu  Name Submenu  Name Items  or  Setting  V alues
Plug-in  Power On  and  Off
USB  Type  B USB  Display  and  Wireless
Mouse
Language 15  or  35  languages
*1
Info  menu
s p.91Lamp  Hours -
Source -
Input  Signal -
Resolution -
Video  Signal -
Refresh  Rate -
Sync  Info -
Status -
Serial  Number -
Event  ID -
Reset  menu
s p.92Reset  All -
Reset  Lamp  Hours -*1 The  number  of  supported  languages  differs  depending  on  the  region  where  the
projector  is  used.
Network  menu
Top Menu Name...

Top Menu Name Submenu Name Items or Setting V alues
Address 1 Setting, Ad-
dress 2 Setting, and Ad-
dress 3 Setting-
Others menu
s p.90SNMP On and Off
Trap IP Address 1 and
Trap IP Address 2-
Priority Gateway Wired LAN and Wireless LAN
AMX Device Discovery On and Off
RoomView On and Off
Image  Menu
Settable  items  vary  depending  on  the  image  signal  and  source  currently
being  projected.  Setting  details  are  saved  for  each  image  signal.
s
 "Automatically  Detect  Input  Signals  and...

Submenu Function
Abs. Color Temp.(This item cannot be selected if Color Mode is set to 
sRGB
g.)
You can adjust the overall tint of the image. You can adjust tints
in 10 stages from 5000 K to 10000 K. The image is tinted blue
when a high value is selected and tinted red when a low value is
selected.
Color Adjust-
ment(This item cannot be selected if Color Mode is set to 
sRGB
g.)
You can adjust the color strength for Red, Green, and Blue
individually.
Auto Iris(This item can be set only if Color Mode is...

Submenu Function
Progressive(This setting can only be adjusted when a component video or
RGB video with an interlaced signal (480i/576i/1080i) is input.
This cannot be set when a digital RGB signal is input.)
Interlace
g (i) signal is converted to 
Progressive
g (p). (IP
conversion)
Off: Ideal for images with a large amount of movement.
Video: Ideal for general video images.
Film/Auto: This is ideal for movie films, computer graphics, and
animation.
Noise Reduction(This cannot be set when a digital R G B...

Settings  Menu
Submenu Function
KeystoneYou can correct keystone distortion.
•When H/V-Keystone is selected:
•Correcting manually
Adjust  V-Keystone and  H-Keystone to  correct
horizontal  and  vertical  keystone  distortion.
•Correcting automatically
Set  Auto  V-Keystone to  On.
(This  item  cannot  be  selected  if  Projection  is  set  to
Front/Ceiling,  Rear,  or  Rear/Ceiling.)
s "Correcting  automatically  (Auto  V-Keystone)"  p.36
•When Quick Corner is selected:
Select  and  correct  the...