Elmo Boxi T-350 Mobile Projector Instruction Manual

 
 
61 
 
Detail settings menu 
Projection mode setting menu 
 
Selecting the projection mode 
 
1. Display the “Detail settings” menu. 
2. Select the icon  with the  
buttons on the remote control or on the 
control panel. 
Press the  button to execute the selection. 
 
The “Projection mode setting” menu will be displayed. 
 
3. Select “Front” or “Rear” with the   buttons on the remote control 
or on the control panel. 
 
Icon Mode Description  
 Front 
To be used when the 
projector is placed in front...

 
 
62 
 
Detail settings menu 
 
Selecting the installation mode 
1.  Display the “Detail settings” menu. 
2.  Select the icon  with the  
buttons on the remote control or on the 
control panel. 
Press the  button to execute the selection. 
 
The “Installation mode setting” menu will be 
displayed. 
 
3. Select “Desktop” or “Ceiling” with the   buttons on the remote 
control or on the control panel. 
Icon Mode Description  
 
 Desktop 
To be used when the 
projector is installed 
in the desktop mount...

 
 
63 
 
Detail settings menu 
 
Setting the CEC mode 
1.  Display the “Detail settings” menu. 
 
2.  Select the icon  with the   
buttons on the remote control or on the 
control panel. 
 
Press the  button to execute the selection. 
 
The “CEC mode setting” menu will be 
displayed. 
 
3.   Select “ON” or “OFF” with the   
buttons on the remote control or on  
the control panel. 
 
Setting Description  
ON To activate the CEC mode.  
OFF To cancel the CEC mode. Default 
 
 Press the  button to execute...

 
 
64 
 
 
Returning to the factory settings 
1.  Display the “Detail settings” menu. 
2.  Select the icon  with the  
buttons on the remote control or on the 
control panel. 
Press the  button to execute the selection. 
 
The “Factory settings” menu will be displayed. 
 
3. Select “Yes” or “No” with the   buttons on the remote control or 
on the control panel. 
 
Icon Description 
 
 
Return to the factory settings. 
 
Do not return to the factory settings. 
 
Press the  button to execute the...

 
 
65 
 
 
4 MAINTENANCE 
This section describes the simple maintenance procedures you should follow to clean 
the lens, the cabinet and the remote control. 
 
CLEANING THE LENS, THE CABINET AND THE 
REMOTE CONTROL 
Cleaning the lens 
1. Before starting the cleaning, turn off the projector, disconnect the power cord and 
then allow the cabinet to cool. 
2. Wipe the lens with commercial lens-cleaning paper. 
 
 
 
 
 
 
Cleaning the cabinet and the remote control 
 
 
1. Before starting the cleaning,...

 
 
66 
 
squeeze the cloth very well, and then wipe the cabinet. After cleaning, gently 
wipe the cabinet with a dry cloth. 
 
 
Wipe the dirt off the remote control with a dry soft cloth. 
 
 
 
CLEANING THE INSIDE OF THE PROJECTOR 
Continued use with dust inside may result in fire, electric shock, malfunction or 
deteriorated image. For the safe use of the projector, have it cleaned and inspected 
by your dealer at least once a year. Ask you dealer for the maintenance fee. 
 
 
 
 
 
 
 
 
■ Do not...

 
 
67 
 
 
5 TROUBLESHOOTING 
INDICATOR ICONS 
During use of the projector, the following icons may appear at the bottom right of the 
screen to warn you or indicate errors. When the icon appears, follow the instructions 
described in the table below. 
If the same icon still appears after following the above instructions, contact your 
dealer. 
 
Example of the warning indication 
 
 
Icon Description Solution 
Temperature 
warning 
 
The internal temperature has 
been increased. 
 
This icon will be...

 
 
68 
 
 
 
Icon Description Solution 
LED 
brightness 
degradation 
 
The brightness of the LED is 
decreased. 
It is the time to replace the 
LED lamp. If you continue to 
use the projector without 
replacing the lamp, the 
brightness will decrease 
continuously. 
 
This icon will be displayed 
once after the projector is 
turned on. 
Contact your dealer for repair. 
 
 
 
 
 
■ Using the projector in places where the temperature is high or where 
there is a lot of dust or smoke, or using it...

 
 
69 
 
 
Example of the error indication 
 
 
Icon Description Solution 
Temperature 
error 
 
The internal temperature has 
been increased. 
The projector will be turned off 
in 5 seconds. 
Turn off the projector immediately 
and allow the projector to cool 
down for at least 30 minutes. 
Make sure of the following and turn 
on the projector: 
- The ventilator is not blocked by 
objects or in any way obstructed. 
- The ventilator is not covered with 
dust. 
- The peripheral temperature is not...

 
 
70 
 
TEMPERATURE & WARNING INDICATOR DISPLAY 
 The warning indicators indicate the status of the internal temperature and the internal 
fan, by flashing or by lighting. 
 
 
＜Upper part of the Control panel＞ 
 
 
Power indicator   Temperature indicator   Warning indicator 
 
 
 
Temperature indicator (Red) Solution 
 
On 
An abnormal 
temperature inside the 
projector is detected. 
Turn off the projector immediately 
and allow the projector to cool 
down for at least 30 minutes. 
Make sure of the...