Elmo Boxi T-350 Mobile Projector Instruction Manual

 
 
11 
 
 
1 GETTING STARTED 
CHECKING THE PACKAGE CONTENTS                                        
The items below are included with this product. If any item is missing, contact the  
dealer from whom you purchased this product. 
Projector AC adapter Power cord 
 
 
 
 
 
 
 
 
 
 
Remote control IMPORTANT SAFEGUARD 
QUICK START GUIDE WARRANTY CARD 
 
 
*Battery included 
 
 
 
 
 
 
 
 
          

 
 
12 
 
 
PART NAMES AND FUNCTIONS                                                              
Projector  
             TOP/FRONT                BOTTOM /BACK 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Number Name Function Related 
Page 
①  Lens Project an image. →P.21 
②  Focus dial To focus the projected image. →P.33 
③  Speaker Built-in speaker. - 
④  Control panel To control the projector. →P.13 
⑤  Remote sensor To receive IR signal from the remote 
control. →P.20 
⑥  Rear panel Terminal panel to connect other...

 
 
13 
 
 
 
 
 
 
 
 
 
 
 
 
 
Control panel 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Number Mark Name Function Related 
Page 
①   Power indicator The green LED turns on when 
the projector is turned on. →P.15 
②   
Temperature 
indicator 
Red LED light turns on or flashes 
when the projector is 
overheating. 
→P.15,70 
 
 
①  ②  ③  
⑨ ⑩  
④ 
⑥ ⑦ 
⑤ 
⑧ 
 
 
 CAUTION 
■ Do not look into the lens during the projection. The strong light emitted from 
the lens may cause damage to your eyes. Pay attention...

 
 
14 
 
Number Mark Name Function Related 
Page 
③   
Warning 
indicator 
The red LED flashes when there 
is something wrong with the 
projector. 
→P.15,70 
④    Volume button The “Volume control” screen 
appears. →P.37 
⑤   DOWN button The “Keystone correction” 
screen appears. →P.46 
⑥   LEFT button To move the selected item to the 
left. - 
⑦   RIGHT button To move the selected item to the 
right. - 
⑧   Enter button To execute the selected item. - 
⑨   Power button To turn on/off the projector....

 
 
15 
 
 
List of LED indicators  
The 3 LED indicators on the top of the projector indicate the status of the projector by 
lighting up or flashing, in different colors and different flashing speeds. 
 
＜Upper part of the Control panel＞ 
 
 
Power indicator   Temperature indicator   Warning indicator 
 
If the temperature indicator lights up, the projector is at risk of overheating. If the 
warning indicator lights up or flashes, there is something wrong with the projector. 
Refer to “TEMPERATURE &...

 
 
16 
 
 
 
Terminal panel 
 
 
 
 
 
Number Name Function Related 
Page 
①  HDMI  HDMI input terminal. 
To connect an HDMI output device. →P.28 
②  MAINTENANCE This port is for maintenance only. - 
③  AUDIO Head Phone output Terminal. →P.29 
④  DC IN  To connect the supplied AC adapter. →P.27 
⑤   
Anti-theft security slot. 
To connect a security cable. - 
 
 
 
 
⑤  ④  ③  ②  ①  
■ Use the HIGH SPEED HDMI cable with HDMI logo. 
HDMI cable that is not compliant with HDMI standard may not be used. 
■ Do...

 
 
17 
 
 
Remote control 
 
 
 
Number Mark Name Function Related 
Page 
①   Power button To turn on/off the projector. →P.31, 32 
②  MENU Menu button 
To display/hide the menu. 
To return to the previous menu 
without executing the selected 
item while operating the menu. 
→P.42 
③   LEFT button To move the selected item to the 
left. - 
④   RIGHT button To move the selected item to the 
right. - 
⑤   ENTER button To execute the selected item. - 
⑥   
Blank screen  
button 
To display/cancel the blank...

 
 
18 
 
 
Number Mark Name Function Related 
Page 
⑩   
Contrast 
Button 
To adjust the contrast of the 
projector. →P.40 
⑪   ECO button To set the ECO mode. →P.41 
⑫   
＋ Volume＋button To increase the volume of the 
built-in speaker. →P.36 
⑬   
－ Volume－button To decrease the volume of the 
built-in speaker. →P.36 
⑭   MUTE button To temporarily mute the sound. →P.38 
 
 Preparing the remote control 
 
 
1. A  battery  is  pre-installed  in  the  remote  control  at  the  time  of  shipment  (with...

 
 
19 
 
 
 
 
 
 
 
■ Improper use of the battery may lead to electrolyte leakage or bursting 
and may cause fire, injury or corrosion to the remote control. Observe 
the following precautions for safety use of the product. 
・ Do not use any battery other than specified. 
・ If the battery leaks, wipe off the leaked electrolyte with a cloth and 
install a new battery. If the leaked electrolyte contacts your skin, 
immediately wash it away with running water. 
・ When the time to replace the battery...

 
 
20 
 
 
Operating range for the remote control 
Aim the IR transmitter of the remote control at the IR receiver on the back of the 
projector to control the projector. 
Use the remote control within its operating range as described below. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
■ Do not place any objects between the remote control and the IR receiver. 
The remote control transmits IR signals and the projector will not respond 
if there are objects between the remote control and the IR...