Electrolux Ewn 148640 W User Manual

							 Delayed start ( End Time ) : this op-
tion allows to delay the starting of the wash-
ing program by 30 min - 60 min - 90 min, 2
hours and then by 1 hour till 20 hours. The
delay you have selected is indicated on the
display. The end time will increase in order
to show you the selected delay.
You must select this option after you have
set the programme and before you press
the button 7 .
If you wish to add laundry in the machine
during the delay time you will press the but-
ton 7 to put the machine in pause.
Add the laundry, close the door and press
the button 7 again.
You can cancel the delay time at any mo-
ment, before you press the button 7 .
Selecting the delayed start
•
by pressing Up 
 or Down  button
you can move through the options menu
till you locate the delayed start
• press the button 6 to activate this option
(the visualized time starts blinking)
•
by pressing Up 
 or Down  button
you can increase or decrease the delay
time
• press button 6 to confirm your delay
• press the buttons 3 or 4 to return the dis-
play to the default status
• press the button 7 to start the pro-
gramme. The programme will start after
the selected delay has expired
Cancelling the delayed start
• press the button 7 to pause the appliance
•
press Up 
 or Down  button to move
through the options menu till you locate
the delayed start
• press 6 button to activate this option (the
visualized time starts to flash)
•
by pressing Down 
 button you can de-
crease the delayed start to the current
time.
• press the button 6 to confirm your choice
•
press the button 3 or 4 to return the dis-
play to the default status
•
press the button 7 to start the pro-
gramme immediately.
The delayed start  cannot be selected with
Drain 
 programme.
 Favourite programme ( Favourite ) :
programme settings that are frequently
used can be saved (e.g. cotton, 60°C,1200 rpm, with Prewash and Extra Rinse).
There are 2 memory spaces available for
this purpose in the last 2 positions of the pro-
gramme selector dial ( 1 ). The saved pro-
gramme can be selected in the same way
as any other wash programme by means of
the selector dial.
Saving favourite programme:
• select the desired programme and re-
quired options
•press the buttons 5 to activate the op-
tions menu
•
press the Up 
 or Down  button to lo-
cate the position for memorizing favourite
programme ( Save Favourite ) option and
press the button 6
•
press the Up 
 or Down  button to se-
lect one of the favourite position (1-2) to
memorize your customized programme
•press the button 6 to save the selected
programme. The display says that the pro-
gramme has been saved in highlighted
mode.
•
by pressing the button 3 or 4 the display
returns the default status.
To change the memorized programme set-
ting repeat the procedure from the begin-
ning.
Note
If the memory space is already used by a
programme previously selected, the display
says that the favourite position is already
used. Press the button 6 to over write it or
buttons 
 or  to cancel, then press the
button  6 to memorize the new programme.
The favourite programmes cannot be
erased, but you can over write them by se-
lecting a different programme.
 Washing guide ( Wash Guide ) : this
appliance is provided with a washing guide
menu that allows you to select the most suit-
able temperature, spin speed and options
to wash your laundry.
In the washing guide menu you can also lo-
cate a stain guide ( Stain Guide ), that con-
tains important information on how to re-
move the most rappresentative stains, and
a «Demo Mode» ideal for shop floor demon-
strations (not suitable for the customer).
Select the washing guide:
•press the buttons 5 to activate the op-
tions menu
electrolux  11
 
						

							•
press the Up  or Down  button to lo-
cate the washing guide
•
press the button 6  to enter into the wash-
ing guide
•
by pressing the Up 
 or Down  but-
ton you can move through the different
guides ( Temperature Guide , Spin Speed
Guide , Demo Mode ...)
• press the button 6 to enter into the selec-
ted guide and by pressing the Up 
 or
Down 
 you can read all the explana-
tions of the selected one
• to consult another guide you must return
to the washing guide menu selecting the
«Back» 
 symbol and repeat the proce-
dure starting from the 4th point
• by pressing the button 3 or 4 the display
returns to the default status.
Select the «Time Manager» option
(buttons 8)
Time Manager01:50
18:05
Press this button twice to activate the time
manger option.
This function allows you to modify the wash-
ing time, automatically proposed by the ap-
pliance. By pressing the «Time Manager»
buttons « +/- » repeatedly, the duration of
the washing cycle can be increased or de-
creased.
The Time Manager option cannot be selec-
ted with Economy programme.
The soil level icon 
 appears on the dis-
play and it changes according to soil de-
gree you have chosen.
Soil LevelIconType of fabric
IntensiveFor heavy soiled
items
NormalFor normal soiled
items
DailyFor daily soiled
items
LightFor slightly soiled
items
QuickFor very slightly
soiled items
Soil LevelIconType of fabric
Super Quick 1)For items used or
worn for a short
time
Refresh 1)For refreshing
items only
(Super) Re-
fresh 1)For refreshing a
very few items only
1) We recommend you to reduce the load sizes (see
«Washing Programmes» table).
Press the button 7 to start the
programme
To start the selected programme, press the
button 7 ; the green pilot light stops blinking.
On the display will appear the icon, and al-
ternatively the name and the running phase
of the selected programme to indicate that
the appliance starts operating and the door
is locked.
To interrupt a programme which is running,
press the button 7 : the green pilot light
starts blinking and the icon of the selected
programme appears on the display, the dis-
play says to press the button 7 to continue
for some seconds and then that the appli-
ance is pause setting. To restart the pro-
gramme from the point at which it was inter-
rupted, press the button 7 again .
If you have chosen a delayed start, the ap-
pliance will begin the countdown.
Altering an option or a running
programme
It is possible to change only the options vi-
zualised on the display by pressing the but-
tons 5 ( Up or Down ) before the pro-
gramme carries them out. Before you make
any change, you must pause the appliance
by pressing the button 7 .
Changing a running programme is possible
only by resetting it . Turn the programme
selector dial to O and then to the new pro-
gramme position, press the button 6 to can-
cel the previous washing programme. Start
the new programme by pressing the button
7 again. The washing water in the tub will
not emptied out.
Interrupting a programme
Press the button 7 to interrupt a pro-
gramme which is running, the correspond-
ing light starts blinking. Press the button
again to restart the programme.
12  electrolux
 
						

							Cancelling a programme
Turn the selector dial to O and then in the
new selected programme. Press the button
6 to cancel the programme which is run-
ning. Now press the button 7 to start the
new programme.
Opening the door after the programme
has started
Press the button 7 to set the machine to
pause. The corresponding message will ap-
pear on the display.
If the door cannot be opened, this means
that the appliance is already heating, that
the water level is above the bottom edge of
the door.
In this case the door can not be opened.
If you cannot open the door but you need
to open it you have to switch the machine
off by turning the selector dial to O . After
some minutes the door can be opened
( pay attention to the water level and
temperature! ).
At the end of the programme
The machine stops automatically.
If the  Rinse Hold  or  Night Cycle  op-
tions have been selected, the pilot light ofbutton 7 goes off, the icon of the selected
programme and the message « Finished »
appears on the display and the door re-
mains locked to indicate that the water
must be emptied out before opening the
door.
To empty out the water :
• select the draining or spinning programme
• reduce the spin speed if needed, by
means of the relevant button
•
press button 7
• at the end of the programme, the display
shows the 
 (Door) icon and alternately
says that the door is unlocked and that
the door is finished. The door can be
opened.
Turn the programme selector dial to O to
switch the appliance off. Remove the laun-
dry from the drum and carefully check that
the drum is empty.
If you do not intend to carry out another
wash, close the water tap. Leave the door
open to prevent the formation of mildew
and unpleasant smells.
Stand by : once the programme has finish-
ed after a few minutes the energy saving sys-
tem will be enabled. The brightness of thedisplay is reduced. By pressing any button
the appliance will come out of the energy
saving status.
HELPFUL HINTS AND TIPS
Sorting out the laundry
Follow the wash code symbols on each gar-
ment label and the manufacturer’s washing
instructions. Sort the laundry as follows:
whites, coloureds, synthetics, delicates,
woollens.
Before loading the laundry
Never wash whites and coloureds together.
Whites may lose their «whiteness» in the
wash.
New coloured items may run in the first
wash; they should therefore be washed sep-
arately the first time.
Button up pillowcases, close zip fasteners,
hooks and poppers. Tie any belts or long
tapes.
Remove persistent stains before washing.Rub particularly soiled areas with a special
detergent or detergent paste.
Treat curtains with special care. Remove
hooks or tie them up in a bag or net.
Removing stains
Stubborn stains may not be removed by
just water and detergent. It is therefore ad-
visable to treat them prior to washing.
Blood: treat fresh stains with cold water.
For dried stains, soak overnight in water
with a special detergent then rub in the
soap and water.
Oil based paint: moisten with benzine
stain remover, lay the garment on a soft
cloth and dab the stain; treat several times.
Dried grease stains: moisten with turpen-
tine, lay the garment on a soft surface and
electrolux  13
 
						

							dab the stain with the fingertips and a cot-
ton cloth.
Rust: oxalic acid dissolved in hot water or a
rust removing product used cold. Be careful
with rust stains which are not recent since
the cellulose structure will already have
been damaged and the fabric tends to hole.
Mould stains: treat with bleach, rinse well
(whites and fast coloureds only).
Grass: soap lightly and treat with bleach
(whites and fast coloureds only).
Ball point pen and glue: moisten with ace-
tone
2), lay the garment on a soft cloth and
dab the stain.
Lipstick: moisten with acetone as above,
then treat stains with methylated spirits.
Treat any residual marks with bleach.
Red wine: soak in water and detergent,
rinse and treat with acetic or citric acid,
then rinse. Treat any residual marks with
bleach.
Ink: depending on the type of ink, moisten
the fabric first with acetone
2) , then with ace-
tic acid; treat any residual marks on white
fabrics with bleach and then rinse thorough-
ly.
Tar stains: first treat with stain remover, me-
thylated spirits or benzine, then rub with de-
tergent paste.
Detergents and additives
Good washing results also depend on the
choice of detergent and use of the correct
quantities to avoid waste and protect the en-
vironment.
Although biodegradable, detergents contain
substances which, in large quantities, can
upset the delicate balance of nature.
The choice of detergent will depend on the
type of fabric (delicates, woollens, cottons,
etc.), the colour, washing temperature and
degree of soiling.
All commonly available washing machine de-
tergents may be used in this appliance:
• powder detergents for all types of fabric• powder detergents for delicate fabrics
(60°C max) and woollens
• liquid detergents, preferably for low tem-
perature wash programmes (60°C max)
for all types of fabric, or special for wool-
lens only.
The detergent and any additives must be
placed in the appropriate compartments of
the dispenser drawer before starting the
wash programme.
If using liquid detergents, a programme
without prewash must be selected.
Your appliance incorporates a recirculation
system which allows an optimal use of the
concentrated detergent.
Follow the product manufacturer’s recom-
mendations on quantities to use and do
not exceed the «MAX» mark in the de-
tergent dispenser drawer .
Quantity of detergent to be used
The type and quantity of detergent will de-
pend on the type of fabric, load size, de-
gree of soiling and hardness of the water
used.
Follow the product manufacturers’ instruc-
tions on quantities to use.
Use less detergent if:
• you are washing a small load
• the laundry is lightly soiled
• large amounts of foam form during wash-
ing.
Degrees of water hardness
Water hardness is classified in so-called “de-
grees” of hardness. Information on hard-
ness of the water in your area can be ob-
tained from the relevant water supply com-
pany, or from your local authority. If the wa-
ter hardness degree is medium or high we
suggest you to add a water softener follow-
ing always the manufacturer’s instructions.
When the degree of hardness is soft, read-
just the quantity of the detergent.
2) do not use acetone on artificial silk
14  electrolux
 
						

							WASHING PROGRAMMES
Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
OptionsDetergent
Compartment
COTTONS
90 °- Cold
Main wash - Rinses
Maximum spin speed 1400 rpm
Max. load 8 kg - Reduced load 4 kg
1)
For white and coloured cotton (normally soiled
items).
SPIN REDUCTION
NO SPIN
RINSE HOLD
NIGHT CYCLE
PREWASH
2)
EASY IRON
EXTRA RINSE
TIME MANAGER
SYNTHETICS
60° - Cold
Main wash - Rinses
Maximum spin speed 900 rpm
Max. load 4 kg - Reduced load 2 kg
1)
Synthetic or mixed fabrics: underwear, coloured gar-
ments, non-shrink shirts, blouses.
SPIN REDUCTION
NO SPIN
RINSE HOLD
NIGHT CYCLE
PREWASH 
2)
EASY IRON
EXTRA RINSE
TIME MANAGER
DELICATES
40° - Cold
Main wash - Rinses
Maximum spin speed 900 rpm
Max. load 4 kg - Reduced load 2 kg
1)
Delicate fabrics: acrylics, viscose, polyester.
SPIN REDUCTION
NO SPIN
RINSE HOLD
NIGHT CYCLE
PREWASH
2)
EXTRA RINSE
TIME MANAGER
WOOL / HANDWASH
40° - Cold
Main wash - Rinses
Maximum spin speed 1000 rpm
Max. load 2 kg
Washing programme for machine washable wool as
well as for hand washable woollens and delicate fab-
rics with «hand washing» care symbol. Note : A single
or bulky item may cause imbalance. If the appliance
doesn’t perform the final spin phase, add more items,
redistribute the load manually and then select the spin-
ning programme.
SPIN REDUCTION
NO SPIN
RINSE HOLD
NIGHT CYCLE
LINGERIE
40° - Cold
Main wash - Rinses
Maximum spin speed 1000 rpm
Max. load 1 kg
This programme is suitable for very delicate items
such a lingerie, bras and underwear. The maximum
spin speed is automatically reduced.SPIN REDUCTION
NO SPIN
RINSE HOLD
NIGHT CYCLE
electrolux  15
 
						

							Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
OptionsDetergent
Compartment
SILK
30° - Cold
Main wash - Rinses
Maximum spin speed 900 rpm
Max. load 1 kg
Delicate washing programme suitable for silk and
mixed synthetic items.SPIN REDUCTION
NO SPIN
RINSE HOLD
NIGHT CYCLE
RINSE
Rinse - Long spin
Maximum spin speed 1400 rpm
Max. load 8 kg
With this programme it is possible to rinse and spin cot-
ton garments which have been washed by hand. To in-
tensify the rinsing action, select the option EXTRA
RINSE. The appliance will add some additional rinses.SPIN REDUCTION
NO SPIN
RINSE HOLD
NIGHT CYCLE
EASY IRON
EXTRA RINSE
DRAIN
Draining of water
Max. load 8 kg
For emptying out the water of the last rinse in pro-
grammes with the option selected, which ends with
water left in the tub.  
SPIN
Drain and long spin
Maximum spin speed 1400 rpm
Max. load 8 kg
Separate spin for hand washed garments and after pro-
grammes with the Rinse Hold and Night Cycle option
selected. You can choose the spin speed by pressing
the relevant button to adapt it to the fabrics to be spun.SPIN REDUCTION 
COTTONS ECONOMY
90° - 40°
Main wash - Rinses
Maximum spin speed 1400 rpm
Max. load 8 kg
White and fast coloured cotton
This programme can be selected for slightly or normal-
ly soiled cotton items. The temperature will decrease
and the washing time will be extended. This allows to
obtain a good washing efficiency so saving energy.SPIN REDUCTION
NO SPIN
RINSE HOLD
NIGHT CYCLE
PREWASH
2)
EASY IRON
EXTRA RINSE
14 MIN.
30°
Main wash - Rinses
Maximum spin speed 900 rpm
Max. load 2 kg
Ideal for laundry which needs freshening up only .SPIN REDUCTION
NO SPIN
RINSE HOLD
16  electrolux
 
						

							Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
OptionsDetergent
Compartment
BLANKET
40° - 30°
Main wash - Rinses
Maximum spin speed 900 rpm
Max. load 2,5 kg
For a single washable synthetic blanket or duvet.SPIN REDUCTION 
 /OFF
For cancelling the programme which is running or to
switch the machine off .  
1) If you select the Quick or Super Quick option by pressing button 8 , we recommend that you reduce the maximum
load as indicated. Full loading is possible however with somewhat reduced cleaning results. If you select the
Refresh or Super Refresh option, we recommend that you reduce the load even more.
2) If using liquid detergents, a programme without PREWASH must be selected.
CARE AND CLEANING
Warning! You must disconnect the
appliance from the electricity supply,
before you can carry out any cleaning
or maintenance work.
Descaling
The water we use normally contains lime. It
is a good idea to periodically use a water
softening powder in the machine. Do this
separately from any laundry washing, and
according to the softening powder manufac-
turers instructions. This will help to prevent
the formation of lime deposits.
After each wash
Leave the door open for a while. This helps
to prevent mould and stagnant smells form-
ing inside the appliance. Keeping the door
open after a wash will also help to preserve
the door seal.
Maintenance wash
With the use of low temperature washes it
is possible to get a build up of residues in-
side the drum.
We recommend that a maintenance wash
be performed on a regular basis.
To run a maintenance wash:
• The drum should be empty of laundry.
• Select the hottest cotton wash pro-
gramme.• Use a normal measure of detergent,
must be a powder with biological proper-
ties.
External cleaning
Clean the exterior cabinet of the appliance
with soap and water only, and then dry thor-
oughly.
Important! Do not use methylated spirits,
solvents or similar products to clean the
cabinet.
Cleaning the dispenser drawer
The detergent dispenser drawer should be
cleaned regularly.
The washing powder and additive dispens-
er drawer should be cleaned regularly.
Remove the drawer by pressing the catch
downwards and by pulling it out.
electrolux  17
 
						

							Flush it out under a tap, to remove any
traces of accumulated powder.
To aid cleaning, the top part of the additive
compartment should be removed. Clean all
parts with water.
Clean the chamber of dispenser drawer
with a brush.
Washing drum
Rust deposits in the drum may occur due
to rusting foreign bodies in the washing or
tap water containing iron.
Important! Do not clean the drum with
acidic descaling agents, scouring agents
containing chlorine or iron or steel wool.
1. Remove any rust deposits on the drum
with a cleaning agent for stainless steel.
2. Run a washing cycle without any wash-
ing to clean off any cleaning agent resi-
dues.
Programme: Short Cotton Programme
at maximum temperature and add ap-
prox. 1/4 measuring cup of detergent.
Door seal
Check from time to time the door seal and
eliminate eventual possible objects that
could be trapped in the fold.
18  electrolux
 
						

							Drain pump
The pump should be inspected regularly
and particularly if:
• the appliance does not empty and/or spin;
• the appliance makes an unusual noise dur-
ing draining due to objects such as safety
pins, coins etc. blocking the pump;
• a problem with water draining is detected
(see chapter “What to do if...” for more de-
tails).
Warning! Before opening the pump
door, switch the appliance off and
remove the mains plug from the socket.
Proceed as follows:
1. Unplug the appliance.
2. If necessary wait until the water has
cooled down.
3. Open the pump door levering on the
groove with a coin (or with the suitable
tool, that you can find in the bag con-
taining the instruction booklet, depend-
ing on the model).
1
2
4. Place a bowl with a small edge close to
the pump to collect any spillage.
5. Pull out the emergency emptying cap
from the filter cover, using pliers.
6. When no more water comes out, un-
screw the pump cover by turning it anti-
clockwise, using pliers, and remove the
filter. Always keep a rag nearby to dry
up any water spillages when removing
the cover.
Clean the filter under a tap, to remove
any traces of fluff.
12
7. Remove foreign bodies and fluff from
the pump seat and from the pump im-
peller.
electrolux  19
 
						

							8. Check carefully whether the pump im-
peller rotates (it rotates jerkily). If it
doesn’t rotate, please contact your
Service Centre.
9. Replace the filter into the pump by in-
serting it correctly into the special
guides. Screw the pump cover firmly by
turning it clockwise.
10. Replace the emergency emptying cap
into the filter cover and fix it firmly.
11. Close the pump door.
20  electrolux