Eizo Flexscan Sx2762w Users Manual

31Chapter4PowerSavingFunctions
4-3. Enabling/Disabling Automatic Brightness Adjustment “Auto EcoView”
The sensor on the front side of the monitor detects the environmental brightness to adjust the screen brightness 
automatically and comfortably by using the Auto EcoView function.
Attention
• Be careful not to block the sensor on the lower side of the monitor when using the Auto EcoView function.
Procedure
1.
 
C
 hoose “PowerManager” from the Adjustment menu, and press 
.
2.
 
C

hoose “Auto...

32Chapter4PowerSavingFunctions
4-6. Displaying the power saving ratio “EcoView Index”
This indicator shows the power saving ratio, power reduction and CO2 reduction as a result of the brightness of 
the monitor.
Procedure
1.
 
C

hoose “PowerManager” from the Adjustment menu, and press 
.
2.
 
C

hoose “EcoView Index” from “PowerManager”, and press 
.
The “EcoView Index” appears.
(Example)
Note...

33Chapter5Troubleshooting
Chapter 5 T roubleshooting
If a problem still remains after applying the suggested remedies, contact your local dealer.
5-1. No picture
Problem Possible cause and remedy
1. No picture
• 
P
 ower  indicator  does  not  light.•
C heck  whether  the  power  cord  is  connected  properly.
• 
T
 urn  off  the  main  power,  and  then  turn  it  on  again  a 
f

ew  minutes  later.
•

T
 urn  the  main  power  switch  on.
•

Pr
 ess 
.
•

P...

34Chapter5Troubleshooting
Problem Possible cause and remedy
•Themessageshowst hatt hei nputs ignali so ut 
o

f  the  specified  frequency  range.  (Such  signal 
f

requency  is  displayed  in  magenta.)  
Example:
fD:Dot  clock
fH: 
H
 orizontal  scan  frequency
f V:

V
 ertical  scan  frequency •

C
 heck  whether  the  PC  is  configured  to  meet  the 
r

esolution  and  vertical  scan  frequency  requirements 
o

f  the  monitor  (see  “2-1. ...

35Chapter5Troubleshooting
5-2. Imaging problems
Problem Possible cause and remedy
1. The screen is too bright or too dark. • U se  “Brightness”  or  “Contrast”  in  the  Adjustment 
m

enu  to  adjust  it.  (The  LCD  monitor  backlight  has  a 
l

imited  life  span.  When  the  screen  becomes  dark  or 
b

egins  to  flicker,  contact  your  local  dealer.)
•

T
 urn  on  the  “Auto  EcoView”  function  in  the  Adjustment 
m

enu.  The  monitor  detects...

36Chapter5Troubleshooting
5-3. Other problems
Problem Possible cause and remedy
1. The adjustment menu does not appear. • C heck  whether  the  operation  lock  function  works  (see 
“

3- 6.  Locking  Buttons  “Key  Lock””  (page  25)).
2.
 
N
 o mode menu is displayed. •

C
 heck  whether  the  operation  lock  function  works  (see 
“

3- 6.  Locking  Buttons  “Key  Lock””  (page  25)).
(When using EcoView Sense)  The images remain to be displayed when 
you move away...

37Chapter6Reference
Chapter 6 Reference
6-1. How to Attach the Optional Arm
An optional arm (or an optional stand) can be attached by removing the stand section. Please refer to our web 
site for the corresponding optional arm (or optional stand). http://www.eizo.com
Attention
• When attaching an arm or stand, follow the instructions of their User’s Manual.
•
 
W
 hen using another manufacturer’s arm or stand, confirm the following in advance and select one conforming to the 
VESA standard.
- Clearance...

38Chapter6Reference
6-2. Connecting Multiple PCs
The product has multiple connections to PCs and allows you to switch to one of the connections for display.
Connection examples
DVIconnector
S
ignal

cable
(supplied

DD200 -DL)
Signal  cable
(option  PP200)
DVI-Dconnector
D
igital
(DVI) Digital
(DisplayPort)
To
 PC  1 To
 PC  2DisplayPortconnector
DisplayPort
 connectorMiniDisplayPort
c onnector
Signal
 cable
(Commercially
 available 
p

roduct)
Digital
(Mini
 DisplayPort)
To
...

39Chapter6Reference
 ●To switch among input signals
The input signal switches each time  is pressed.
When the signal is switched, the active input port name appears at the top right corner of the screen.
Note
• You can skip a specific input signal. For more information, see “3-9. To Disable Input Signal “Input Skip”” (page 28).
 ●To set input signal selection “Input Selection”
SettingFunction
AutoThe  monitor  recognizes  the  connector  through  which  PC  signals  are  input.
When  a  PC...

40Chapter6Reference
6-3. Making Use of USB (Universal Serial Bus)
This monitor has a hub compatible with USB. Connected to a PC compatible with USB or another USB hub, 
this monitor functions as a USB hub allowing connection to peripheral USB devices.
 ●Required System Environment
1. A PC equipped with a USB port or another USB hub connected to a USB compatible PC
2. 
W
 indows 2000/XP/Vista/7 or Mac OS 9.2.2 and Mac OS X 10.2 or later
3.
 
E
 IZO USB cable (MD-C93)
Attention
• This monitor may not...