Eizo Flexscan Sx2762w Users Manual

21Chapter2Adjusting Screens
2- 4. Selecting Screen Size
 ●To change screen size “Screen Size”
The image with the resolution other than the recommended resolution is displayed in full screen 
automatically. You can change the screen size by using the “Screen Size” function from “Screen”.
Setting Function
FullDisplays  an  image  in  full  screen.  Images  are  distorted  in  some  cases  because  the 
v

ertical  rate  is  not  equal  to  the  horizontal  rate.
Enlarged Displays
...

22Chapter2Adjusting Screens
2-6. Enabling/Disabling Auto Sharpness “Auto 
Sharpness”
By enabling Auto Sharpness outlines will be adjusted according to the displayed image which can improve its 
feel and texture.
Procedure
1.
 
C
 hoose “Screen” from the Adjustment menu, and press 
.
2.
 
C

hoose “Auto Sharpness” from “Screen”, and press 
.
3.
 
Se

lect “On” or “Off ” with 
 or .
4.
 
P

ress 
 to exit.
Note
• The extent of adjustment depends on the setting value of “Outline Enhancer”.
  

23Chapter3SettingMonitor
Chapter 3 Setting Monitor
3-1. Enabling/Disabling Mode Selection “Mode Preset”
Allows you to select the specified modes only.
Use this function when all the display modes are not available or when keeping the display mode unchanged.
Procedure
1.
 
C
 hoose “Tools” from the Adjustment menu, and press 
.
2.
 
C

hoose “Mode Preset” from “Tools”, and press 
.
3.
 
U

se 
 or  to select the mode to change, and press .
4.
 
Se

lect “On” or “Off ” with 
 or .
5.
 
P

ress 
 to...

24Chapter3SettingMonitor
3-3. Setting Orientation “Orientation”
This function allows you to change the orientation of the Adjustment menu when using the monitor screen in 
vertical display position.Procedure
1.
 
C
 hoose “Menu Settings” from the Adjustment menu, and press 
.
2.
 
C

hoose “Orientation” from “Menu Settings”, and press 
.
3.
 
Se

lect “Landscape” or “Portrait” with 
 or .
4.
 
P

ress 
 to exit.
5.
 
W

hen selecting “Portrait”, turn the monitor screen 90° in clockwise direction....

25Chapter3SettingMonitor
3-6. Locking Buttons “Key Lock”
This function allows you to lock the adjusted/set status to prevent changing them.Procedure
1.
 
P
 ress 
 to turn off the monitor.
2.
 
H

olding 
 down, press  for at least two seconds to turn on the monitor.
The “Optional Settings” menu appears.
3. Choose “Key Lock” from “Optional Settings”, and press .
4.
 
C

hoose “Off ”, “Menu”, or “All” with 
 or , and press .
Settings Buttons that can be locked
Off
(Default
 setting) None
 (All ...

26Chapter3SettingMonitor
3-8. Setting the Input Signals “Signal Selection”
Signals can be selected based on your operating environment.
Attention
• The graphics board supporting signal display is required.
• 
R
 efer to the User’s Manual of the graphics board.
 ●To connect DVI (Single Link)
Procedure
1.
 
P
 ress 
 to turn off the monitor.
2.
 
H

olding 
 down, press  for at least two seconds to turn on the monitor.
The “Optional Settings” menu appears.
3. Choose “Signal Selection” from “Optional...

27Chapter3SettingMonitor
 ●To connect DVI (Simple display of HDMI signal from digital camera)
An HDMI signal from a digital camera can be simply displayed by means of connecting this product and the 
digital camera using a DVI-HDMI converter cable.
Attention
• For displaying the PC signal, “Single Link” or “Dual Link” should be set.
Procedure
1. 
P
 ress 
 to turn off the monitor.
2.
 
H

olding 
 down, press  for at least two seconds to turn on the monitor.
The “Optional Settings” menu appears.
3....

28Chapter3SettingMonitor
3-9. To Disable Input Signal “Input Skip”
This function allows skipping of the set input signals when the input signals are switched.
When not all the input signals are displayed or when keeping the input signals unchanged, set “Input Skip” to 
“On” for the signals to be disabled.Procedure
1.
 
C
 hoose “Tools” from the Adjustment menu, and press 
.
2.
 
C

hoose “Input Skip” from “Tools”, and press 
.
3.
 
C

hoose the input signal to set with 
 or , and press .
4.
 
Se

lect...

29Chapter4PowerSavingFunctions
Chapter 4 Power Saving Functions
4-1. Setting Power Saving “Power Save”
This function allows you to set the monitor into the power saving mode according to the PC status. When the 
monitor has shifted to the power saving mode, the images on the screen are not displayed.
Attention
• Turning off the main power switch or unplugging the power cord completely shuts off power supply to the monitor.
•
 
D
 evices connected to the USB upstream port and USB downstream port work...

30Chapter4PowerSavingFunctions
4-2. Setting the power saving mode when a person leaves the monitor “EcoView Sense”
The sensor on the front side of the monitor detects the movement of a person by setting a value from “Level-1” 
to “Level-4” of the EcoView Sense function. When a person moves away from the monitor, it shifts to the 
power saving mode automatically and does not display the images on the screen to reduce the power 
consumption. When a person comes near the monitor again, it comes back...