Eizo Flexscan Sx2762w Users Manual

11Chapter1Introduction
 ●Functions
The following table shows all the Adjustment menu’s adjustment and setting menus.
Main menuSetting Reference
ColorBrightness“2-3.  Adjusting  Color”  (page  15)
Contrast
Temperature
Gamma
Advanced
S

ettingsHue
Saturation
ContrastEnhancer
OutlineEnhancer
Gain
6Colors
ColorReset “ 3-10.  Return  To  Default  Setting”  (page  28)
Screen
ScreenSize “ 2- 4.  Selecting  Screen  Size”  (page  21)
Overdrive“2-5.  Configuring  Moving  Image ...

12Chapter1Introduction
ToolsInputSelection“ To  set  input  signal  selection  “Input  Selection”” 
(p

age  39)
InputSkip“ 3-9.  To  Disable  Input  Signal  “Input  Skip””  (page 
2

8)
ModePreset“ 3-1.  Enabling/Disabling  Mode  Selection  “Mode 
Pr

eset””  (page  23)
SignalInfo“ 6- 4.  Displaying  monitor  information”  (page  41)
MonitorInfo
AllReset“ 3-10.  Return  To  Default  Setting”  (page  28)
*

T

he

adjustment/settings  available  on  “Color”...

13Chapter2Adjusting Screens
Chapter 2 Adjusting Screens
2-1. Compatible Resolutions
The monitor supports the following resolutions.
 ●Digital Input (DVI-D: Single Link)
Resolution Applicable Signals Vertical Scan 
Frequency Dot Clock
640×480
V GA60  Hz
162  MHz
(Max.)
720
 ×  400 VGA
 TEXT70
 Hz
800
 ×  600 VESA 60
 Hz
1024
 ×  768 VESA 60
 Hz
1280
 ×  960 VESA 60
 Hz
1280
 ×  1024 VESA 60
 Hz
1600
 ×  1200 VESA 60
 Hz
1920
 ×  1080
*11080p@50 50  Hz
1920

×

1080 CEA-861...

14Chapter2Adjusting Screens
2-2. Setting the Resolution
When you connect the monitor to the PC and find that the resolution is improper, or when you want to change 
the resolution, follow the procedure below.
 ●Windows 7
1. Right-click the mouse anywhere on the desktop except for icons.
2.
 
F
 rom the displayed menu, click “Screen resolution”.
3.
 
O
 n the “Screen Resolution” dialog box, select the monitor.
4.
 
C
 lick “Resolution” to select the desired resolution.
5.
 
C
 lick the “OK” button.
6....

15Chapter2Adjusting Screens
2-3. Adjusting Color
 ●To select the display mode (FineConstrast mode)
This function allows easy selection of a desired mode according to monitor application.
Display Modes
Mode Purpose
1-User1Select  one  of  these  user  modes  to  define  a  desired  set  of  parameter  settings.
2-User2
3-User3
4-Paper Produces
 a  printed  paper  effect  by  decreasing  contrast  and  color  temperature.
5 -Text Suitable
 for  displaying  texts  for  word ...

16Chapter2Adjusting Screens
 ●To perform advanced adjustments
“Color” of the Adjustment menu allows you to configure and save a separate set of color settings for each 
mode.
Attention
• The monitor will take about 30 minutes before its internal electric components stabilize. Wait 30 minutes or more 
after turning the monitor power on before starting adjustment.
•
 
T
 he same image may be seen in different colors on multiple monitors due to their monitor-specific characteristics. 
Make fine color...

17Chapter2Adjusting Screens
 ●To adjust brightness “Brightness”
The screen brightness is adjusted by changing the brightness of the backlight (light source from the LCD 
back panel).
Adjustable range
0 to 100%
Procedure
1.
 
P
 ress 
 or .
The Brightness menu appears.
2. Use  or  for adjustment.
3.
 
P

ress 
 to exit.
Note
• When your feel the image is bright even if the brightness is set to 0%, adjust the contrast.
•  
A
 lternatively, you can use “Brightness” under “Color” in the Adjustment menu to...

18Chapter2Adjusting Screens
 ●To adjust color temperature “Temperature”
The color temperature can be adjusted.
The color temperature is normally used to express the hue of “White” and/or “Black” by a numerical value. 
The value is expressed in degrees “K” (Kelvin).
The screen becomes reddish at a low color temperature, and bluish at a high color temperature, like the flame 
temperature. The gain preset values are set for each color temperature setting value.
Adjustable range
Native, 4000K-10000K...

19Chapter2Adjusting Screens
 ●To adjust color saturation “Saturation”
This function allows you to adjust color saturation.
Adjustable range
-100 to 100
Procedure
1.
 
C
 hoose “Color” from the Adjustment menu, and press 
.
2.
 
C

hoose “Advanced Settings” from “Color”, and press 
.
3.
 
C

hoose “Saturation”, and press 
.
4.
 
U

se 
 or  for adjustment.
5.
 
P

ress 
 to exit.
Attention
• Using this function may make some color gradations unavailable for display.
Note
• The minimum value (-100)...

20Chapter2Adjusting Screens
 ●To adjust gain “Gain”
The brightness of each color component red, green, and blue is called “Gain”. You can change the hue of 
“white” by adjusting gain.
Adjustable range
0 to 100%
Procedure
1.
 
C
 hoose “Color” from the Adjustment menu, and press 
.
2.
 
C

hoose “Advanced Settings” from “Color”, and press 
.
3.
 
C

hoose “Gain”, and press 
.
4.
 
C

hoose the color to adjust from “Red”, “Green”, and “Blue”, and then press 
.
5.
 
U

se 
 or  for adjustment.
6.
 
P...