Eizo Coloredge Cg222w Users Manual

3. Screen Adjustment and Settings
1

-. Power Indicator Setting
Light	off	the	power	indicator.	This	function	is	available	for	the	multiple	panels	settings.
[Procedure]
1.	Select		in	the	Adjustment	menu		menu.
2.	Select	"Disable".
-. Automatic brightness adjustment
The	sensor	on	the	front	side	of	the	monitor	detects	the	environmental	brightness	to	adjust	the	screen	
brightness	automatically	and	comfortably.
[Procedure]
1.	Select		in	the	Adjustment	menu		menu.
2.	Select...


3. Screen Adjustment and Settings

-. Displaying Lower Resolutions
The	lower	resolutions	are	enlarged	to	full	screen	automatically.	Using	the		function	in	the	
	menu	enables	to	change	the	screen	size.
1	 Enlarge	the	screen	size	when	displaying	a	low	resolution.
		Select	the	.	
Select	the		in	the		menu	and	select	the	screen	size	by	using	
	and	.
ModeFunction
FullDisplays the picture on the screen in full, irrespective of the picture's resolution. 
Since the verticalresolution and...

3. Screen Adjustment and Settings


3	 Set	the	brightness	of	the	black	area	surrounding	the	displayed	image.
	Set	the	.
In	the	"Enlarge"	mode	or	"Full	Screen"	mode,	the	outer	area	(border)	is	usually	black.	Select	
	in	the		menu	and	adjust	by	using	
.
-10. Setting the orientation of the Adjustment menu
The	orientation	of	the	Adjustment	menu	can	be	changed.
[Procedure]
1.	Select		in	the	Adjustment	menu		menu.
2.	Select		in	the		menu.
3.	Use	
	to	select	between...


4. Troubleshooting

.Troubleshooting
If	a	problem	still	remains	after	applying	the	suggested	remedies,	contact	your	local	dealer.
•	No-picture	problems	:	See	No.1	-	No.2
•	Imaging	problems	:	See	No.3	-	No.14
•	Other	problems	:	See	No.15	-	No.18
•	USB	problems	:	See	No.19	
ProblemsPossible cause and remedy
1.  No picture
•
 Power indicator does not light.
•
 Check whether the power cord is connected correctly. If 
the problem persists, turn off the monitor, and then turn 
it on again a...

4. Troubleshooting


ProblemsPossible cause and remedy
5. Vertical bars appear on the screen or a part of the image 
is flickering.
•
 Adjust using  (page 14).
6.  The characters and images have several vertical bars on 
their right side.
•
 Adjust the characters and images using the  
.
7.  Whole screen is flickering or blurring.
•
 Adjust using  (page 14).
8.  Characters are blurred.
•
 Adjust using  (page 22).
9.  Upper part of the screen is distorted as shown below. 
•
 This is caused when...


4. Troubleshooting

ProblemsPossible cause and remedy
18.	does not function.•  (Auto Adjustment function) does not function when 
digital signal is input. 
• Check for Adjustment Lock function (page 20).
•
 This function does not work correctly with some graphics 
boards.
19.The monitor connected with the USB cable is not 
detected. / USB devices connected to the monitor does 
not work.
•
 Check that the USB cable is correctly connected.
•
 Check the downstream ports by connecting the...

5. Reference


. Reference
-1. Attaching an arm
The	LCD	monitor	can	be	used	with	an	arm	by	removing	the	tilt	stand	and	attaching	the	arm	stand	to	the	
LCD	monitor.
Note
•	If	you	will	use	the	arm	or	stand	of	other	manufacturers,	confirm	the	followings	to	the	manufacturers	
before	selecting.
- 	Hole	spacing	on	the	arm	mounting	
100	mm	x	100	mm	(VESA	compliant)	
- 	Supportable	Weight:	Total	weight	of	the	monitor	(without	stand)	and	attaching	equipment	such	
as	a	cable
- 	TÜV/GS	approved...


5. Reference

-. Specifications
LCD Panel56 cm (22.0 inch), TFT color LCD panel  Surface treatment : Hard Coating Surface hardness : 3H Response Time : 16ms
Viewing AngleHorizontal : 178°, Vertical : 178°(CR: 10 or more)
Dot Pitch0.282mm
Horizontal Scan 
Frequency
Analog24~82 kHz (Automatic)
Digital31~65 kHz
Vertical Scan 
Frequency
Analog47.5~86Hz (Automatic)   (1280x1024 : 47.5 ~ 76Hz)                                         (1680x1050 : 47.5 ~ 61Hz)
Digital47.5 ~ 61 Hz (VGA TEXT:...

5. Reference


Default settings
Brightness33%
Smoothing3
Temperature5000K
FineContrast ModeCustom
PowerManager Analog input : VESA DPMS 
Digital input:DVI DMPM
Screen SizeFull
Input Priority1
Off TimerDisable
Menu SettingsMenu SizeNormal
Menu Off Timer45 sec
BrightRegulatorDisable
BeepOn
LanguageEnglish
Beeper settings
Short beepAdjustment menu item selsected. Adjustment menu parameter adjusted to minimum or maximum limit. 
 pressed 
When locked or unlocked with 
Long beep pressed Adjustment...

0
5. Reference

Dimensions
333(13.1)298.1(11.7)
475.8(18.7)507(20.0)
35°35°
203.5(8.0)100(3.9)203.5(8.0)
222.5
100
116.5
43.974(2.91)
106(4.2)
TILT 40°253.5(10.0)
190(7.5)
230(9.1)398.5(15.7)
521439～
20.5)
(17.3～
10119～4.0)
(0.75～
(1.73)
4*(/-4*(/-
SWIVEL
513(20.2)229(9)340(13.4)
445(17.5)
339(13.3)
3(0.12)
355(14)
16(0.63)
172.5(6.8)
45.6(1.8)
151(5.9)
uinit: mm (inch)