Eizo Coloredge Cg222w Users Manual

Important
Please read PRECAUTIONS, this User’s  
Manual and Setup Manual (separate 
volume) carefully to familiarize yourself 
with safe and effective usage. 
Please retain this manual for future 
reference.
About TCO'03 ............................................................35
FCC Declaration of Conformity  ..................................36
Hinweise zur Auswahl des richtigen 
Schwenkarms für Ihren Monitor / 
Hinweis zur Ergonomie  ..............................................37
Notice for...


SAFETY SYMBOLS

As  an  ENERGY  STAR®  Partner,  EIZO  NANAO  CORPORATION  has  determined  that  this  product 
meets the ENERGY STAR guidelines for energy efficiency.
Product  specifications  may  vary  depending  on  the  region.  Confirm  the  specifications  in  the  manual  written 
in the language of the region of purchase.
Copyright© 2008 EIZO NANAO CORPORATION All rights reserved. No part of this manual may be 
reproduced, stored in a retrieval system, or transmitted, in any form or by...

Notice for this Monitor


Notice for this monitor
• Aside from creating documents, viewing multimedia content, and other general purposes, this product is 
also suited to applications such as graphics creation and digital photo processing, where accurate color 
reproduction is a priority. 
•  This product has been adjusted specifically for use in the region to which it was originally shipped. If the 
product is used outside the region, it may not operate as specified in the specifications.
•  This...


Notice for this Monitor
Cleaning
NOTE
•	Never	use	thinner,	benzene,	alcohol,	abrasive	cleaners,	or	other	strong	solvents,	as	these	may	cause	
damage	to	the	cabinet	or	LCD	panel.
[LCD Panel]
• 	The	LCD	surface	can	be	cleaned	with	a	soft	cloth,	such	as	cotton	or	lens	paper.
•	If	necessary,	stubborn	stains	can	be	removed	by	using	the	provided	ScreenCleaner,	or	moistening	
part	of	a	cloth	with	water	to	enhance	its	cleaning	power.	
[Cabinet]
• 	To	remove	stains,	wipe	the	cabinet	with	a	soft,	lightly...

1. Introduction

1. Introduction
Thank	you	very	much	for	choosing	an	EIZO	Color	Monitor.
1-1. Features
•	22"	wide	format	LCD
•	Wide	color	gamut	of	92%	of	Adobe	RGB
•	Applicable	to	HDCP
•	Dual	inputs	compliant	(DVI-I	x	2)
•	DVI	Digital	input	(TMDS	)	compliant
•	[Horizontal	scanning	frequency]	
Analog:	24	-	82	kHz
	
Digital:	31	-	65	kHz
	
[Vertical	scanning	frequency]
	
Analog:	47.5	-	86Hz	(1280	x	1024:	47.5	-	76Hz	/	1680	x	1050:	47.5	-	61Hz)
	
Digital:	47.5	-	61Hz	(VGA	text:	69	-	71Hz)...


1. Introduction

1-. Buttons and Indicators
1456783
1.	Sensor	(BrightRegulator)	
2.	Adjustment	Lock	button
	
3.	Input	Signal	Selection	button
	
4.	Mode	button
	
5.	Auto	Adjustment	button
	
6.	Enter	button
	
7.	Control	buttons	(Left,	Down,	Up,	Right)
	
8.	Power	button
	
9.	Power	indicator
Indicator statusOperation status
BlueThe screen is displayed
Flashing blue (2 times for each)When the timer is set for ColorNavigator, notifies that a recalibration is 
required (for CAL mode or EMU mode)...

1. Introduction


1-. Utility Disk
An	"EIZO	LCD	Utility	Disk"	(CD-ROM)	is	supplied	with	the	monitor.	The	following	table	shows	the	
disk	contents	and	the	overview	of	the	application	software	programs.
Disk contents and software overview
The	disk	includes	software	programs	for	adjustment	and	User’s	Manual.	Refer	to	"Readme.txt"	or	the	
"read	me"	file	on	the	disk	for	software	startup	procedures	or	file	access	procedures.
ItemOverviewFor WindowsFor Macintosh
A “Readme.txt”...


2. Installation

. Installation
-1. Connecting Two PCs to the Monitor
Two	PCs	can	be	connected	to	the	monitor	through	the	DVI-I	connector	on	the	back	of	the	monitor.
Connection examples
PC 1PC 
(Ex.1)DigitalDVI
Signal Cable 
(FD-C39 enclosed)
Signal Cable 
(FD-C16 enclosed)D-Sub 
mini 15 
pin
Analog
(Ex.2)Analog
D-Sub 
mini 15 
pin
Signal Cable 
(FD-C16 enclosed)
Signal Cable
(FD-C16 optional)D-Sub 
mini 15 
pin
Analog
Selecting input signal
Switch	the	input	signal	with	.	Input...

2. Installation


Priority settingPerformance
1If signals from both inputs are present, the monitor gives preference to 
Signal 1 in the following cases.
• When the power of the monitor is turned ON.
• When the signal input to Signal 1 is changed even if active input was 
Signal 2.
2If signals from both inputs are present, the monitor gives preference to 
Signal 2 in the following cases.
• When the power of the monitor is turned ON.
• When the signal input to Signal 2 is changed even if active...

10
2. Installation

-. Making Use of USB (Universal Serial Bus)
This	monitor	provides	a	hub	which	supports	the	USB	standard.	When	connecting	to	a	USB	compliant	PC	
or	another	hub,	the	monitor	functions	as	a	hub	to	which	the	USB	compliant	peripherals	can	be	easily	
connected.
Required system environment
•	PC	equipped	with	USB	ports	or	another	USB	hub	connected	to	the	USB	compliant	PC
•	Windows	2000/XP/Vista	//	Mac	OS	9.2.2/Mac	OS	X	10.2	or	later
•	USB	Cable	(MD-C93,	enclosed)
Note
•	The	USB	hub...