Eizo Coloredge Cg222w Users Manual

3. Screen Adjustment and Settings
11

. Screen Adjustment and Settings
-1. Basic Operation and Functions
Adjustment	menu	allows	you	to	adjust	screen	performance	though	the	main	menu	and	select	a	
FineContrast	mode	easily.
Note
•	The	Adjustment	menu	and	the	FineContrast	menu	cannot	be	displayed	at	the	same	time.
1	 Entering	the	Adjustment	menu
Press		once	to	display	the	main	menu	of	the	Adjustment	menu.	
2	 Making	Adjustments	and	Settings
1.	Select	the	desired	sub	menu	icon	using		and	press	....

1
3. Screen Adjustment and Settings

Functions
The	following	table	shows	all	the	Adjustment	menu's	adjustment	and	setting	menus.	"*"	indicates	
adjustments	of	analog	input	only	and	"
** "	indicates	digital	input	only.
Main menuSub menuReference
ScreenClock*3-2. Screen Adjustment
Phase*
Position*
Resolution*
Range Adjustment*
Smoothing
Signal Filter*
Color (Custom)*1Brightness3-3. Color Adjustment
Temperature
Gamma
Saturation
Hue
Gain
6 Colors
Reset
PowerManagerDVI DMPM**3-4....

3. Screen Adjustment and Settings
1

-. Screen Adjustment
Note
•	Allow	the	LCD	monitor	to	stabilize	for	at	least	30	minutes	before	making	image	adjustments.
The monitor displays the digital input image correctly based on its pre-setting data.
Analog Input
The	monitor	screen	adjustment	is	used	to	suppress	flickering	of	the	screen	or	adjust	screen	position	and	
screen	size	correctly	according	to	the	PC	to	be	used.
	
To	use	the	monitor	comfortably,	adjust	the	screen	when	the	monitor	is	set...

1
3. Screen Adjustment and Settings

3	 Perform	the	auto	size	adjustment	again	with	the	analog	screen	adjustment	pattern	
displayed.
1.	Display	Pattern	1	in	full	screen	on	the	monitor	using	the	“Screen	Adjustment	Utility”	or	the	screen	adjustment	pattern	files.
2.	Press	.	
A	message	“Your	setting	will	be	lost,	if	you	press	again	now”	appears	for	five	seconds.
3.	 Press		again	while	the	message	is	displayed.	
The	Auto	Adjustment	function	begins	(showing	a	running	status	icon)	to	adjust	flickering,...

3. Screen Adjustment and Settings
1

(3)	The	screen	position	is	incorrect.	
	Use	the		adjustment.	
The	correct	displayed	position	of	the	monitor	is	decided	because	the	number	and	the	position	of	
the	pixels	are	fixed.	The		adjustment	moves	the	image	to	the	correct	position.	
Select		and	adjust	the	position	by	using	
,	,		and	.	If	vertical	bars	of	distortion	
appear	after	finishing	the		adjustment,	return	to		adjustment	and	repeat	the	
previously	explained	adjustment	procedure.	("Clock"	=>...

1
3. Screen Adjustment and Settings

-. Color Adjustment
Simple adjustment [FineContrast mode]
This	function	allows	you	to	select	the	best	display	mode	for	monitor	brightness,	etc.
To select FineContrast mode
Directly	pressing		allows	you	to	select	the	best	suited	mode	for	screen	display	from	4	FineContrast	
modes;	Custom,	sRGB,	EMU	and	CAL.	Color	settings	each	mode	can	be	adjusted	by	using	the		
menu	of	the	Adjustment	menu.
	
Press	
	to	exit	the	menu.
 ->Custom -> sRGB -> EMU -> CAL...

3. Screen Adjustment and Settings
1

Advanced Adjustments [Adjustment menu]
Color	settings	of	each	FineContrast	mode	can	be	adjusted	and	saved	by	using	the		menu	of	the	
Adjustment	menu.
In the analog input, perform the "Range Adjustment" before making the color adjustments. During color 
adjustments, the FineContrast mode cannot be changed. Select the mode in advance by
using  
Adjustment Items
The	adjustable	items	and	displayed	icons	on	the		menu	depend	on	the	selected	FineContrast...

1
3. Screen Adjustment and Settings

Adjustment Contents
MenuFunction DescriptionsAdjustable range
BrightnessTo set the brightness of the screen0~100%
Tips
• The values shown in the “%” are available only as reference.
TemperatureTo set the color temperature4000K~10000K 
in 500 K increments (including 9300 K)
Tips
•
 The values shown in the Kelvin are available only as a reference tool.
•
 While color temperature is adjusted,  is adjusted automatically according to the 
color temperature.
•...

3. Screen Adjustment and Settings
1

-. Power-save Setup
The		menu	in	the	Adjustment	menu	enables	to	set	the	power-save	setup.
Note
•	Do	your	part	to	conserve	energy,	turn	off	the	monitor	when	you	are	finished	using	it.	Disconnecting	
the	monitor	from	the	power	supply	is	recommended	to	save	energy	completely.
• 	Even	if	the	monitor	is	in	a	power	saving	mode,	USB	compliant	devices	function	when	they	are	
connected	to	the	monitor's	USB	(both	the	upstream	and	the	downstream	ports)....

0
3. Screen Adjustment and Settings

-. Off Timer
The	off	timer	function	causes	the	monitor	to	automatically	enter	a	power	off	state	after	a	predetermined	
amount	of	time	has	lapsed.	This	function	was	created	to	reduce	Afterimage	characteristics	that	are	
particular	to	LCD	monitors	when	the	monitor	screen	is	left	on	for	a	long	period	without	use.
[Procedure]
1.	Select		in	the	Adjustment	menu		menu.
2.	Select	"Enable	and	touch	the	Right	and	Left	directing	switches	to	adjust	the...