Home > Eizo > Monitor > Eizo Coloredge Cg221 Users Manual

Eizo Coloredge Cg221 Users Manual

Here you can view all the pages of manual Eizo Coloredge Cg221 Users Manual. The Eizo manuals for Monitor are available online for free. You can easily download all the documents as PDF.

Page 51

15.The  cannot 
be selected.[ ] is disabled when the screen is 
displayed in the 1920 x 1200.
[ ]  is disabled when Normal is 
selected in the  menu.
[ ] The image size is doubled both in 
horizontally and vertically to (i.e. 1600 x 
1200 enlarged from 800 x 600) provide clear 
focus which does not require this function.
16. The Main menu of 
ScreenManager does not 
operate.[ ]Check that there is nothing left on the face of 
Enter switch. Wipe the control panel, and 
then touch the Enter switch again...

Page 52

19.USB function cannot be 
setup.[ ]Check that the USB cable is correctly 
connected.
[ ] Check that the PC and OS are USB 
compliant. (For verification of USB support, 
consult the manufacturer of each system.)
[ ] Check the PCs BIOS setting for USB. ( For 
details, refer to the manual of the PC.)
20. PC is hung up. / The 
peripherals connected to 
the downstream ports do 
not operate.[ ]Check that the USB cable is correctly 
connected.
[ ] Check the downstream ports by connecting 
the peripherals to...

Page 53

Periodic cleaning is recommended to keep the monitor looking new and to \
prolong its 
operation lifetime.
 
*Never use thinner, benzene, alcohol (ethanol, methanol, or isopropyl al\
cohol), 
abrasive cleaners, or other strong solvents, as these may cause damage t\
o the 
cabinet or LCD panel.
 
Cabinet
To remove stains, wipe the cabinet with a soft, lightly moistened cloth \
using a mild 
detergent. Do not spray wax or cleaner directly into the cabinet. (For \
details, refer to 
the manual of the PC.)...

Page 54

LCD Panel56.4 cm (22.2 inch), TFT color LCD panel with Anti-Glare 
Hard Coating
Viewing Angle: H: 170°, V: 170° (at contrast ratio 1:5)
Dot Pitch 0.249 mm 
Horizontal Scan 
Frequency Analog: 31 - 94 kHz (Automatic)
Digital: 31 - 76 kHz
Vertical Scan 
Frequency Analog: 49 - 86 Hz (Automatic)
(1600 x 1200: 49 - 76 Hz, 1920 x 1200: 49 - 61 Hz)
Digital: 59 Hz - 61Hz, (VGA Text : 69 - 71 Hz)
Resolution  1920 dots x 1200 lines
Dot Clock (Max.)  Analog: 202.5 MHz, Digital: 162 MHz
Display Colors 16 million...

Page 55

Weight 
(without stand)10.4 kg (22.9 lbs.)
Temperature  Operating: 0 °C - 35 °C (32 °F - 95 ° F)
Storage: -20 °C - 60 °C (-4 °F - 140 ° F)
Humidity 30% to 80% R.H. Non-condensing
USB standard USB Specification Revision 2.0
Communication 
speed 480Mbps(high), 12 Mbps (full), 1.5 Mbps (low)
USB ports Upstream port x 1, Downstream port x 2 
Default settings
Analog inputDigital input
Brightness 60%60%
Smoothing 3
Temperature 5,000K
FineContrast Mode Custom
PowerManager VESA DPMSDVI DMPM
Screen Size Full...

Page 56

2 short beeps 
every 15 sec.Monitor is in the advance notice mode of the Off Timer. The 
power will be off within fifteen minutes.
Dimensions
Unit mm (inches)
 
Pin Assignment
DVI-I Connector
 

Page 57

Pin No. Signal Pin 
No. Signal Pin 
No. Signal
1 TMDS Data 2- 11TMDS Data 
1/3 Shield 21
NC
2 TMDS Data 2+ 12NC 22TMDS Clock 
Shield
3 TMDS Data 
2/4 Shield 13
NC 23TMDS Clock+
4 NC* 14+5V Power 24TMDS Clock-
5 NC 15Ground 
(return for 
+5V, Hsync  and Vsync)  C1
Analog Red
6 DDC Clock 
(SCL) 16Hot Plug 
Detect C2
Analog Green
7 DDC Data 
(SDA) 17
TMDS Data0- C3Analog Blue
8 Analog 
Vertical Sync 18
TMDS Data0+ C4Analog Horizontal 
Sync
9 TMDS Data1- 19TMDS 
Data0/5 Shield C5Analog Ground 
(analog R, G,...

Page 58

Clock
With the analog input signal display, the analog signal is converted to \
a digital signal 
by the LCD circuitry. To convert the signal correctly, the LCD monitor n\
eeds to 
produce the same number clock pulse as the dot clock of the graphics sys\
tem. When 
the clock pulse is not correctly set, some vertical bars of distortion a\
re displayed on the 
screen. 
Color Temperature (Temperature)
Color Temperature is a method to measure the white color tone, generally\
 indicated in 
degrees Kelvin....

Page 59

Gain Adjustment
Adjusts each color parameter for red, green and blue. The color of the L\
CD monitor is 
displayed through the color filter of the LCD panel. Red, green and blue\
 are the three 
primary colors. The colors on the monitor are displayed by combining the\
se three 
colors. The color tone can change by adjusting the illumination amount p\
assed through 
each colors filter.
 
Gamma
Generally, the relationship that the light intensity values of a monitor\
 change 
nonlinearly to the input...

Page 60

Resolution
The LCD panel consists of a fixed number of pixel elements which are ill\
uminated to 
form the screen image. The EIZO CG221 display panel consists of 1920 hor\
izontal 
pixels and 1200 vertical pixels. At a resolution of 1920 x 1200, all pix\
els are displayed 
as a full screen.
 
sRGB (Standard RGB)
International Standard for Red, Green, and Blue color space A color sp\
ace was 
defined with the aim of the color matching between applications and hard\
ware devices, 
such as monitors,...
Start reading Eizo Coloredge Cg221 Users Manual

Related Manuals for Eizo Coloredge Cg221 Users Manual

All Eizo manuals