Eizo Coloredge Cg221 Users Manual

Gain 
6 Colors 
Reset 
PowerManagerDVI DMPM **4-4. Power-save Setup 
VESA DPMS *
Others Screen Size
 4-2.Displaying a low resolutions
Border Intensity
 
Input Priority Select the priority input signal.
Off Timer
 Set the monitors off timer to on or 
off.
Beep
 Set the monitors beeper to on or 
off.
Menu 
Settings Menu Size
 Change the size of the menu.
Menu 
Position
 Adjust the menu position.
Menu Off 
Timer
 Set the menu displaying time.
Translucent
 Set the transparency of the 
background.
Indicator...

This function allows you to select the best suited mode for screen displ\
ay.
 
To select the Mode
Touching the Mode switch allows you to select the best suited mode for s\
creen display 
from 4 FineContrast modes; Custom, sRGB, EMU and CAL. 
 
 
Exit
Touch the Enter switch to exit the menu. 
 
FineContrast Mode
Selectable FineContrast modes are as follows.
Custom To adjust the color settings according to your preference.
sRGB To display the screen images based on those original colors (ex. over 
the...

Color Adjustment of the Mode Settings
,  and  settings can be adjusted on the \
FineContrast menu. Select the desired function icon with the Up/Down Dir\
ecting 
switches and adjust with the Left/Right Directing switches. (Setting(s\
) of 
,  and/or  is defined as standard defaul\
t in some 
modes.)
 
Detailed Adjustments
The detailed color settings of each mode can be adjusted by using the  menu 
of the ScreenManager.
 
* EMUmode and CAL mode can be adjusted only by Calibration Software...

switch while touching the Auto Adjustment switch.
[To unlock]
Turn off the monitors power by touching the power switch. And then touc\
h the power 
switch while touching the Auto Adjustment switch once again. 
 
Off Timer
The off timer function causes the monitor to automatically enter a power\
 off state after 
a predetermined amount of time has lapsed. This function was created to \
reduce 
afterimage characteristics that are particular to LCD monitors when the \
monitor screen 
is left on for a long...

Indicator setting
The brightness of indicator lamps can be changed and turned off, when th\
e screen is 
displayed (Operation mode). 
[Procedure](1) Select  in the ScreenManager  menu.
(2) If you desire to turn off the lamps, select Off.
The following lamp are turned off.
l     Custom / sRGB / EMU / CAL 
l     Adj. Lock 
l     Signal1 / Signal2 
l     ON 
If you desire to change the brightness of the lamps, select High , Me\
dium or 
Low. (Default setting is Medium)
EIZO Logo Appearing Function
When...

The monitor displays the digital input image correctly based on its pre-\
setting 
data.
Analog Input
Screen adjustments for the LCD monitor should be used in suppressing scr\
een 
flickering and also for adjusting the screen to its proper position. The\
re is only one 
correct position for each display mode. It is also recommended to use th\
e 
ScreenManager function when first installing the display or whenever cha\
nging the 
system. For convenience, an easy set-up program installed on the utility\...

2.Run the Screen Adjustment Program.
Having read the Readme.txt file, run the Screen Adjustment Program i\
n the 
enclosed EIZO LCD Utility Disk. Step by step, adjustment is provided by \
the wizard 
guide. (If using the Windows, the program can be directly run from the \
menu screen of 
the CD-ROM.)
*If the users operating system has no utility disk (e.g. OS/2), we rec\
ommend 
setting the desktop pattern to that as shown in the diagram on the follo\
wing.
 
3.Adjust by using  menu in the...

(2)Horizontal bars appear on the screen.
=>
Use the  adjustment.
Select the  and eliminate the horizontal flickering, blurring or \
bars by 
using the Right and Left switches.
 
* Horizontal bars may not completely disappear from the screen depending o\
n the 
PC.
 
(3) The screen position is incorrect.
=>
Use the  adjustment.
The correct displayed position of the monitor is decided because the num\
ber and 
the position of the pixels are fixed. The  adjustment moves th\
e image 
to the correct...

(4)Screen image is smaller or larger than the actual screen images.
=>
Use the  adjustment.
Adjustment is needed when the input signal resolution and the resolution\
 now 
being displayed are different. 
Select  and confirm if the resolution now being displayed is\
 the 
same as the input resolution. If it is not, adjust the vertical resoluti\
on using the 
Up and Down switches and adjust the horizontal resolution using the Righ\
t and 
Left switches.
 
4.Adjust the output signal range (Dynamic Range)...

1.Enlarge the screen size when displaying a low resolution.=>
Select the .
Select the  in the others menu and select the screen size b\
y using the Up 
and Down buttons.
Menu Function
Full Displays the picture on the screen in full, irrespective of the 
pictures resolution. Since the vertical resolution and the 
horizontal resolution are enlarged at different rates, some 
image may appear distorted.
Enlarged Displays the picture on the screen in full, irrespective of the 
pictures resolution. Since the...