Eizo Coloredge Cg221 Users Manual

Thank you very much for choosing an EIZO Color Monitor.
 
l     The exclusive use calibration software calibrates the monitor characteri\
stics 
and generate colorprofile.
 
l     Dual inputs compliant 
l     DVI Digital input (TMDS) compliant. 
l     ADC (Apple Display Connector) inputs compliant. 
l     [Horizontal scanning frequency] 
Analog: 31 - 94 kHz
Digital: 31 - 76 kHz
[Vertical scanning frequency]
Analog: 49 - 86 Hz Vertical (1600 x 1200: 49 - 76 Hz, 1920 x 1200: 49 -\
 61 
Hz)
Digital: 59 -...

*LCD Monitor  *Calibration software 
ColorNavigator (in the CD-ROM)
* Power Cord 
* Analog Signal Cable (FD-C16)  *Setup Guide
* Digital Signal Cable (FD-C39)  *ColorNavigator Quick Reference 
* EIZO USB Cable (MD-C93) *LIMITED WARRANTY
* EIZO LCD Utility Disk  *Adjustment Certificate
* Users Manual (in the CD-ROM)  *Cleaning kit ScreenCleaner
* Hood
 
* Please retain the packing materials for future transference.
 
Front
 
 

(1)ScreenManager®
(2)Mode Switch
(3) Auto Adjustment Switch
(4) Enter Switch
(5) Directing Switch (Left, Down, Up, Right)
(6) Input Signal Selection Switch
(7) Power Switch
(8) Indicator lamp
*1
Name The monitor status when each lamp on 
Left Side Custom
Custom mode of 
FineContrast Mode
sRGB sRGB mode of 
FineContrast Mode
EMU EMU mode of 
FineContrast Mode
CAL CAL mode of 
FineContrast Mode
Cal. Alert Notify that the monitor needs to be recalibrated in CAL 
mode or EMU mode.
Right Side Adj. Lock
The...

 
(9)USB Port (2 Downstream)
(10) USB Port (1 Upstream)
(11) Height Adjustable Stand (Detachable)
*2
(12)Security Lock Slot*3
(13)DVI-I Input Connector (SIGNAL 1, SIGNAL2)
(14) Power Connector
*2 The LCD monitor can be used with an optional arm stand by removing the 
stand. (See 
2-6. How to remove the Tilt Stand).
*3 Allows for connection of a security cable. This lock supports Kensington\
s 
MicroSaver security system.
For further information, please consult:
Kensington Technology Group
2855 Campus...

Before connecting your monitor to the PC, change the display screen sett\
ings 
(
resolution and frequency) in accordance with the charts below.
 
*When your computer and display support VESA DDC, the suitable resolution\
 
and the refresh rate are set by just plugging your display into the comp\
uter 
without any manual settings. 
 
Analog Input 
Resolution FrequencyDot Clock Remarks
640 x 480 60 Hz
202.5 MHz(Max.) VGA
640 x 480 67 Hz Apple Macintosh
640 x 480 ~ 85 Hz VESA
720 x 400 70 Hz VGA TEXT
800...

Digital Input
The monitor supports the following resolutions only. 
ResolutionFrequencyDot Clock Remarks
640 x 480 60 Hz
162 MHz(Max.) VGA
720 x 400 70 Hz VGA TEXT
800 x 600 60 Hz VESA 
1024 x 768 60 Hz VESA 
1280 x 960 60 Hz VESA 
1280 x 1024 60 Hz VESA 
1600 x 1200 60 Hz VESA
1680 x 1050 60 Hz VESA CVT
1680 x 1050 60 Hz VESA CVT RB (Reduced Blanking)
1920 x 1200 60 Hz VESA CVT RB (Reduced Blanking)
 
*Be sure that the power switches of both the PC and the monitor are OFF.
 
1.Open the cable cover and...

 
Analog Input
Signal CableConnector  PC
Signal Cable (FD-C16 
enclosed)
Video Output 
Connector / D-Sub 
mini 15 pin
Input Connector 
(monitor) / DVI Standard graphics card 
Power Macintosh G3 
(Blue & White) 
Power Mac G4 (VGA)
Signal Cable (FD-C16 
enclosed) +Adapter*
Video Output 
Connector / D-Sub 15 
pin
Input Connector 
(monitor) / DVI Macintosh 
 *Macintosh Adapter (Optional) 
 
Digital Input
Signal Cable Connector  PC
Signal Cable (FD-C39 
enclosed)
Video Output 
Connector / DVI
Input Connector...

3.Close the cable cover and lead the power cord and signal cable into the cable holder at rear of the monitor.
* The cables are recommended to lead with slight sag for the smooth motion\
 of the 
stand.
* Its recommended to put away the signal cables into the left cable holde\
r, and the 
USB cable and power cord into the right cable holder.
 
4.Plug the other end of the power cord into a power outlet.
WARNING
Use the enclosed power cord and connect to the standard 
power outlet of your country.
Be sure...

5.Turn on the monitors main power and then switch on the PCs power.
The indicator lamp, ON, will light up.
If an image does not appear, refer to the 
6. TROUBLESHOOTING for advice.
Whenever finished, turn off the PC and the monitor.
* When turning on the monitor, the kid of the input signal (Signal1 or 2/\
Analog or 
Digital) is displayed for a few seconds on the right top corner of the \
screen.
* Adjust brightness of the screen depending on the brightness of your envi\
ronment.
* Be sure to take...

Signal CableConnector  PC
Signal Cable (FD-C39 
enclosed) +ADC-DVI 
display adapter 
(commercially available)
 
Video Output 
Connector / ADC
Input Connector 
(monitor) / DVI Power Mac G4 / G5(ADC)
*
ADC-DVI display adapter is required if the monitor connects to Power Mac\
 G4 / 
G5. The adapter is commercially available.
 
2.Plug the power cord into the power connector on the rear of the  monitor. 
 
3.Close the cable cover and lead the power cord and signal cable  into the cable holder at rear of the...