Eizo Coloredge Cg221 Users Manual

* is disabled when the screen is displayed in the following 
resolutions.
 
l     1920 x 1200 
l     The image size is doubled both in horizontally and vertically to (i.e. \
1600 
x 1200 enlarged from 800 x 600) provide clear focus which does not 
require this function.
 
3.Set the brightness of the black area surrounding the displayed  image.
=>
Set the .
In the Enlarge mode or Full Screen mode, the outer area (border) i\
s usually black.
Select  in the  menu and adjust by using the R\
ight and Left...

*: Settable/Adjustable
Icons Functions FineContrast Modes
Custom sRGBEMUCAL
Brightness** ** --
Temperature** *---
Gamma** *-
--
Saturation *---
Hue *---
Gain *-
--
6 colors *---
Reset *---
**These settings can be also adjusted on the FineContrast menu. 
*Allow the LCD monitor to stabilize for at least 30 minutes before making\
 image 
adjustments. (Allow the monitor to warm Up for at least 30 minutes befo\
re 
making adjustments.)
* Performing the  of the  menu returns the color settings of\
 the...

*The values shown in the Kelvin are available only as a 
reference tool. 
*Adjusting the  turns the  adjustment 
OFF.
*Setting the temperature under 4,000 K or over 10,000 K 
invalidates the color temperature setting. (The color 
temperatures setting turns OFF.)
GammaTo set the gamma value1.8 ~ 2.6 (in 0.2 increments)
*If setting the gamma value, the using the monitor in the 
digital signal input is recommended.
If using the monitor in the analog input signal, set the gamma 
value from 1.8 to 2.2....

The  menu in the ScreenManager enables to set the power-sa\
ve setup.
 
*Do your part to conserve energy, turn off the monitor when you are finis\
hed 
using it. Disconnecting the monitor from the power supply is recommended\
 to 
save energy completely.
* Even if the monitor is in a power saving mode, USB compliant devices fun\
ction 
when they are connected to the monitors USB (both the Upstream and the\
 
Downstream ports). Therefore, power consumption of the monitor will cha\
nge 
according to the...

Digital Input
This monitor complies with the DVI DMPM.
[Procedure] (1) Set the PCs power saving settings.
(2) Select DVI DMPM from the  menu.
[Power saving system]
PC Monitor Indicator lamp
ON Power Save
Operation OperationLightOff
Power saving STAND-BY
SUSPEND  OFF Power saving
OffLight
[Power Resumption Procedure]
Operate the mouse or keyboard to return to a normal screen .
 

This monitor provides a hub which supports the USB standard. When connec\
ting to a 
USB compliant PC or another hub, the monitor functions as a hub which th\
e USB 
compliant peripherals can be easily connected.
 
Required System Environment
*PC equipped with USB ports or another USB hub connected to the USB 
compliant PC
* Windows 98/2000/XP//Mac OS 8.5.1 or later
* EIZO USB Cable (MD-C93, enclosed)
*The USB hub function may not work properly depending on the PC, OS or 
peripherals. Please consult the...

 
3.After setting up, the monitors USB hub is available for connecting  USB compliant peripherals to the downstream ports of the monitor.
Connecting Examples
 
 
 
 

If a problem persists even after applying the suggested remedies, contac\
t an EIZO 
dealer. 
l     No picture problems : See No.1 ~ No.2 
l     Imaging problems : See No.3 ~ No.14 
l     Other problems : See No.15 ~ No.18 
l     USB problems : See No.19 ~ No.20 
ProblemsPoints to check with possible solutions
1.No picture
Status of Indicator lamp ON 
is off. [ ]
Check that there is nothing left on the face of 
Power switch. Wipe the control panel, and 
then touch the Power switch again with dry...

The signal frequency is out of 
range. Error signal frequency will 
be displayed in red. (Example)[ ]Use the graphics boards utility software to 
change the frequency setting. (Refer to the 
manual of the graphics board.)
3. Display position is 
incorrect.[ ]Adjust the image position using the 
<
Position>.
[ ] If the problem persists, use the graphics 
boards utility software to change the display 
position if available.
4. Screen image is smaller 
or larger than the actual 
screen images.[ ]Adjust the...

7.Horizontal bars of 
distortion appear.[ ]Decrease the horizontal bars using the 
<
Phase>. 
8. Letters and lines appear 
blurred.[ ]Adjust the blurred lines using .
9. Distortion appears like the 
figure below.[ ]This happens when both composite (X-OR) 
input signal and separate vertical 
synchronizing signal are input. Please select 
one of the two.
10. The screen is too bright 
or too dark.[ ]Adjust the  (The backlight of 
the LCD monitor has a fixed life span. When 
the screen becomes dark or...