Eiki Projector Lc Xb31 User Manual

31
Computer InputComputer Input
Press  the  MENU  button  to  display  the  On-Screen Menu.    Press  the  Point 7  8  buttons  to  move  the red framed pointer to the Image Adjust Menu icon.
P r e s s  t h e  P o i n t e d  b u t t o n s  t o  m o v e  t h e  r e d framed  pointer  to  the  item  that  you  want  to  adjust, and  then  press  the  SELECT  button.    The  level of  each  item  is  displayed.    Adjust  each  level  by pressing the Point 7 8 buttons.
Image Level Adjustment
1
2
Move the...

Computer Input
3
Store
Exit the Image Adjust Menu.
Quit
To  store  the  adjusted  data,  select  Store  and  press  the SELECT  button.    Select  a  level  from  Image  1  to  4  with the Point ed buttons and press the SELECT button.  A confirmation box appears and then select [Yes].Stored  data  can  be  called  up  by  selecting  "Image"  in the Image Level Selection on page 30.
This  projector  has  the  picture  screen  resize  function,  which  enables  you  to  customize  the  image...

33

Custom
Adjust the screen scale and position manually with this function.Press the SELECT button at Custom and the "Custom" is displayed on the screen for a few seconds and then the Aspect dialog box appears.
 Scale H/V ..................  Adjust the Horizontal/Vertical screen scale.  H&V ...........................  When set to "On", the aspect ratio is fixed. The "Scale V" appears dimmed and becomes unavailable. Adjust the "Scale H", then the screen scale is...

34

Computer Input
When  the  Digital  zoom  +  is  selected,  the  On-Screen Menu  disappears  and  the  message  "D.  zoom  +"  is  displayed.    Press  the  SELECT  button  to  expand  the image  size.    And  press  the  Point ed  7  8  buttons  to pan  the  image.    The  Panning  function  can  work  only when the image is larger than the screen size.
A  projected  image  can  be  also  expanded  by  pressing the D.ZOOM e button on the remote control.
Digital zoom +
When  Digital  zoom  –...

35

Video Input
Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control.Before using these buttons, correct input source should be  selected  through  menu  operation  as  described below.
Input Source Selection (Video, S-Video)
Direct Operation
Video
INPUT button
✳ See Note at the bottom of this page.
✳
Remote Control 
Top ControlINPUT button
VIDEO button
Computer 1
Computer 2
Press  the  MENU  button  to  display  the  On-Screen Menu. Press the Point 7 8...

36

Video Input
Computer 1
COMPUTER button
INPUT button
✳ See Note at the bottom of this page.
✳
Remote Control 
Top ControlINPUT button
COMPUTER button
Computer 2
Video
Computer 1
✳Computer 2
Choose  Computer  1  by  pressing  the  INPUT  button  on the  top  control  or  press  the  COMPUTER  button  on  the remote control.Before using these buttons, correct input source should be  selected  through  Menu  operation  as  described below.
Input Source Selection (Component, RGB Scart 21-pin)
Direct...

37

Video Input
Press  the  MENU  button  to  display  the  On-Screen Menu.    Press  the  Point 7  8  buttons  to  move  the red framed pointer to the AV System Menu icon.
Video System Selection
Press  the  Point ed buttons  to move  the  red  arrow pointer  to  the  system  that  you  want  to  select  and then press the SELECT button.
1
2
If  the  projector  cannot  reproduce  proper  video  image, it  is  necessary  to  select  a  specific  broadcast  signal f o r m a t  a m o n g  PA L ,  S E C A M...

38

Video Input
S e l e c t  a n  i m a g e  l e v e l  a m o n g  D y n a m i c ,  S t a n d a r d , 
Cinema, Blackboard (Green), Image 1, Image , Image 
3,  and  Image  4  by  pressing  the  IMAGE  button  on  the remote control.
Normal picture level preset on this projector.
Picture level adjusted for the picture with fine tone.
Standard
Cinema
Image 1 ~ 4
Image Level Selection 
Direct Operation
Blackboard (Green)
Picture  level  suitable  for  the  image  projected  on  a blackboard.  This is...

39

Video Input
Press  the  MENU  button  to  display  the  On-Screen Menu.    Press  the  Point 7  8  buttons  to  move  the red framed pointer to the Image Adjust Menu icon.
P r e s s  t h e  P o i n t e d  b u t t o n s  t o  m o v e  t h e  r e d framed  pointer  to  the  item  that  you  want  to  adjust, and  then  press  the  SELECT  button.    The  level of  each  item  is  displayed.    Adjust  each  level  by pressing the Point 7 8 buttons.
Image Level Adjustment
1
2
Image Adjust Menu
Press...

40

Video Input
To  reset  the  adjusted  data,  select  Reset  and  press the  SELECT  button.    The  confirmation  box  appears and  then  select  [Yes].    All  adjustments  returns  to  their previous figures.
Reset
Press the Point 7 8 buttons to obtain better balance of contrast. (From 0 to 15.)
Gamma
Press  the  Point 7  button  to  soften  the  image  and  the Point 8 button to sharpen the image. (From 0 to 15.)
Sharpness
To  store  the  adjusted  data,  select  Store  and  press  the SELECT...