Eiki Projector Lc Xb31 User Manual

Basic OperationBasic Operation
1
Menu Bar
PC System Menu
Used to select computer 
system. (p.6)
Setting Menu
Used to set the projector's operating configurations.
(p.4-51)
Image Select Menu
Used to select an image level among Dynamic, Standard, Real, Blackboard (Green), and Image 1 ~ 4. (p.30)
For computer source
Guide Window
Show the selected Menu of the On-Screen Menu.
Screen Menu
Used to adjust size of image. [Normal / True / Wide / Full screen / Digital zoom +/–] 
(p.3, 34)...

Basic OperationBasic Operation

Rotate the Zoom Ring to zoom in and out.
Rotate  the  Focus Ring  to  adjust  the  projected  picture 
focus.
Zoom and Focus Adjustment
Zoom Ring(Rear)Focus Ring(Front)
If  a  projected  picture  has  keystone  distortion,  correct the image with Keystone adjustment.
Press  the  KEYSTONE  button  on  the  top  control  or  on the remote control.  The keystone dialog box appears. Correct  keystone  distortion  by  pressing  the  Point ed buttons.    Keystone...

Basic Operation
23
Press the VOLUME+/– buttons on the top control or on the  remote  control  to  adjust  the  volume.    The  volume dialog box appears on the screen for a few seconds.
Press the MUTE button on the remote control to cut off the  sound.    To  restore  the  sound  to  its  previous  level, press  the  MUTE  button  again  or  press  the  VOLUME +/– buttons.Mute function is also effective for AUDIO OUT jack.
Volume
Mute
Direct Operation
Sound Adjustment
1
2
Press  the  MENU  button  to...

Computer Input Basic Operation
4
black out ➜ the captured image ➜ normal ➜ • • • • •
Press  the  NO  SHOW  button  on  the  remote  control  to black  out  the  image.    To  restore  to  normal,  press  the NO  SHOW  button  again  or  press  any  other  button.  When  a  projected  image  is  captured  and  set  as  "User" in  the  Logo  selection  (p.43),  the  screen  changes  each time you press the NO SHOW button as follows.
NO SHOW button
Press  the  AUTO  PC  button  on  the  remote...

Computer Input Basic Operation
5
Choose either Computer 1 or Computer  by pressing the  INPUT  button  on  the  top  control  or  press  the COMPUTER  button  on  the  remote  control.    Before using  these  buttons,  correct  input  source  should  be selected through Menu operation as described below.
Input Source Selection
Direct Operation
Computer 1
COMPUTER button
INPUT button
✳ See Note at the bottom of this page.
✳
Remote Control
Top ControlINPUT button
COMPUTER button
Computer 2...

Computer InputComputer Input
26
Computer System Selection
This  projector  automatically  tunes  to  various  types  of  computers  based  on  VGA,  SVGA,  XGA, SXGA,  WXGA,  or  UXGA  with  its  Multi-scan  system  and  Auto  PC  Adjustment.    If  Computer  is selected  as  a  signal  source,  this  projector  automatically  detects  the  signal  format  and  tunes  to project  a  proper  image  without  any  additional  setting.  (Signal  formats  provided  in  this  projector  is shown on page 62)...

Computer InputComputer Input
7
Auto  PC  Adjustment  function  is  provided  to  automatically  adjust  Fine  sync,  Total  dots,  Horizontal, and Vertical to conform to your computer. Auto PC Adjustment function can be operated as follows.
Auto PC Adjustment
The  Auto  PC  adjustment  function  can  be  operated directly by pressing the AUTO PC button on the remote control unit.
Direct OperationRemote Control 
AUTO PC button
Press  the  MENU  button  to  display  the  On-Screen Menu.    Press  the...

Computer InputComputer Input
8
Press  the  MENU  button  to  display  the  On-Screen Menu.    Press  the  Point 7  8  buttons  to  move  the red framed pointer to the PC Adjust Menu icon.
P r e s s  t h e  P o i n t e d  b u t t o n s  t o  m o v e  t h e  r e d framed    pointer  to  the  item  that  you  want  to  adjust a n d  t h e n  p r e s s  t h e  S E L E C T  b u t t o n  t o  d i s p l a y the  adjustment  dialog  box.    Press  the  Point 7  8 buttons to adjust the value.
Manual PC...

Computer Input
Adjust  the  horizontal  area  displayed  by  this  projector.  Press  the  Point 7  8  buttons  to  decrease/increase  the value.
Display area H
Adjust  the  vertical  area  displayed  by  this  projector.  Press  the  Point 7  8  buttons  to  decrease/increase  the value.
Display area V
Reset
Store
Exit the PC Adjust Menu.
Quit
To  store  adjusted  data,  move  the  red  framed  pointer to  the  Store  item  and  then  press  the  SELECT  button.  Move  the  red  arrow  pointer  to  any...

30
Computer InputComputer Input
Select an image level among Dynamic, Standard, Real, 
Blackboard  (Green),  Image  1,  Image ,  Image  3,  and 
Image  4  by  pressing  the  IMAGE  button  on  the  remote control.
Normal picture level preset on this projector.
Picture level with improved halftone for graphics.
Standard
Real
Image 1 ~ 4
Image Level Selection 
Direct Operation
Blackboard (Green)
Picture  level  suitable  for  the  image  projected  on  a blackboard.    This  mode  assists  to  enhance...