Eiki Projector Lc Xb31 User Manual
Have a look at the manual Eiki Projector Lc Xb31 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 422 Eiki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 32
Computer Input
3
Store
Exit the Image Adjust Menu.
Quit
To store the adjusted data, select Store and press the SELECT button. Select a level from Image 1 to 4 with the Point ed buttons and press the SELECT button. A confirmation box appears and then select [Yes].Stored data can be called up by selecting "Image" in the Image Level Selection on page 30.
This projector has the picture screen resize function, which enables you to customize the image...](http://img.usermanuals.tech/thumb/1702/89357/w64_eiki-lc-xb31-manual_d-31.png "Page 32
Computer Input
3
Store
Exit the Image Adjust Menu.
Quit
To store the adjusted data, select Store and press the SELECT button. Select a level from Image 1 to 4 with the Point ed buttons and press the SELECT button. A confirmation box appears and then select [Yes].Stored data can be called up by selecting \"Image\" in the Image Level Selection on page 30.
This projector has the picture screen resize function, which enables you to customize the image...")
31
Computer InputComputer Input
Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red framed pointer to the Image Adjust Menu icon.
P r e s s t h e P o i n t e d b u t t o n s t o m o v e t h e r e d framed pointer to the item that you want to adjust, and then press the SELECT button. The level of each item is displayed. Adjust each level by pressing the Point 7 8 buttons.
Image Level Adjustment
1
2
Move the red framed pointer to the item to be selected and then press the SELECT button.
Image Adjust Menu
Image Adjust Menu icon
Press the Point 7 button to decrease the contrast and the Point 8 button to increase contrast. (From 0 to 63.)
Press the Point 7 button to adjust the image darker and the Point 8 button to adjust the image brighter. (From 0 to 63.)
Contrast
Brightness
Press the Point 7 button to lighten the red tone and the Point 8 button to deepen the red tone. (From 0 to 63.)
White balance (Red)
Press the Point 7 button to lighten the green tone and the Point 8 button to deepen the green tone. (From 0 to 63.)
White balance (Green)
Press the Point 7 button to lighten the blue tone and the Point 8 button to deepen the blue tone. (From 0 to 63.)
White balance (Blue)
Press the Point 7 button or the Point 8 button for Color temp. level that you want to select. (XLow, Low, Mid, or High) Color temp .
To reset the adjusted data, select Reset and press the SELECT button. The confirmation box appears and then select [Yes]. All adjustments returns to their previous figures.
Reset
Press the Point 7 8 buttons to obtain better balance of contrast. (From 0 to 15.)
Gamma
Press the Point 7 button to soften the image and the Point 8 button to sharpen the image. (From 0 to 15.)
Sharpness
Press the Point 7 8 buttons to adjust the value.
Selected Image level
✔ Note:
A f t e r a d j u s t i n g a n y o f t h e W h i t e
balance Red, Green, or Blue, the Color temp changes to "Adj.".
Computer Input 3 Store Exit the Image Adjust Menu. Quit To store the adjusted data, select Store and press the SELECT button. Select a level from Image 1 to 4 with the Point ed buttons and press the SELECT button. A confirmation box appears and then select [Yes].Stored data can be called up by selecting "Image" in the Image Level Selection on page 30. This projector has the picture screen resize function, which enables you to customize the image size. Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red framed pointer to the Screen Menu icon. Press the Point ed buttons and move the red framed pointer to the function that you want to select and then press the SELECT button. 2 Screen Size Adjustment Provide the image to fit the screen size. Normal True Provide the image in its original size. When the original image size is larger than the screen size (104 x 768 ), this projector enters panning mode automatically. Pan the image with Point ed 7 8 buttons. When adjusted, the arrows turns red. When reached to the correction limit, the arrows disappears. 1 Wide Provide the image to fit wide video aspect ratio (16:9) by expanding the image width uniformly. This function can be used for providing a squeezed video signal at 16:9. Full screen Provide the full screen image. Move the red framed pointer to any of Image 1 to 4 where you want to set and then press the SELECT button. The confirmation box appears, then select [Yes].Store itemPress the SELECT button at this item to store the adjusted data. Move the red framed pointer to the function and press the SELECT button. Screen Menu Screen Menu icon ✔ Note: • T h i s S c r e e n M e n u c a n n o t b e operated when 7 0p(HDTV), 1035i (HDTV), or 1080i (HDTV) is selected in the PC System Menu (p.6). • T h e p r o j e c t o r c a n n o t d i s p l a y a n y resolution higher than 1600x1 00. If your computer’s screen resolution is higher than it, reset the resolution to the lower before connecting to the projector. • The image data in other than XGA ( 1 0 4 x 7 6 8 ) i s m o d i f i e d t o f i t t h e screen size in initial mode. • True, Full screen, and Digital zoom +/– cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p.6). Computer Input
33 Custom Adjust the screen scale and position manually with this function.Press the SELECT button at Custom and the "Custom" is displayed on the screen for a few seconds and then the Aspect dialog box appears. Scale H/V .................. Adjust the Horizontal/Vertical screen scale. H&V ........................... When set to "On", the aspect ratio is fixed. The "Scale V" appears dimmed and becomes unavailable. Adjust the "Scale H", then the screen scale is automatically modified based on the aspect ratio. Position H/V............... Adjust the Horizontal/Vertical screen position. Common ................... Save the adjusted scale to all the inputs. Press the SELECT button at Common to display a confirmation box. To save the scale, press the SELECT button at “Yes.” When Custom is selected, the saved scale is used. Reset ......................... Reset the all adjusted values. Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at "Yes". Press the SELECT button at Common or Reset, to display a confirmation box. Computer Input ✔ Note:• W h e n n o s i g n a l i s d e t e c t e d , "Normal" is set automatically and the Aspect dialog box disappears. • T h e a d j u s t a b l e r a n g e f o r S c a l e H / V a n d P o s i t i o n H / V i s l i m i t e d depending on the input signal.
34 Computer Input When the Digital zoom + is selected, the On-Screen Menu disappears and the message "D. zoom +" is displayed. Press the SELECT button to expand the image size. And press the Point ed 7 8 buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D.ZOOM e button on the remote control. Digital zoom + When Digital zoom – is selected, the On-Screen Menu disappears and the message "D. zoom –" is displayed. Press the SELECT button to compress image size. A projected image can be also compressed by pressing the D.ZOOM d button on the remote control. To exit the Digital zoom +/– mode, press any button except the D.ZOOM ed buttons, SELECT, and Point buttons. To return to the previous screen size, select a screen size from the Screen Size Adjustment or select an input source from the Input Source Selection (p.25) again, or adjust the screen size with the D.ZOOM ed buttons. Digital zoom – For Zooming in and out the imagesRemote Control D.ZOOM + button POINT buttons SELECT button D.ZOOM - button ✔ Note: • T h e p a n n i n g f u n c t i o n m a y n o t operate properly if the stored Mode i n t h e P C A d j u s t M e n u i s u s e d . (p.29) • T h e m i n i m u m c o m p r e s s i o n r a t i o c a n b e l i m i t e d d e p e n d i n g o n t h e input signal or when the Keystone function is working. • True, Full screen, and Digital zoom +/– cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p.26). • Digital zoom +/- cannot be selected when Full screen or True is selected.
35 Video Input Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control.Before using these buttons, correct input source should be selected through menu operation as described below. Input Source Selection (Video, S-Video) Direct Operation Video INPUT button ✳ See Note at the bottom of this page. ✳ Remote Control Top ControlINPUT button VIDEO button Computer 1 Computer 2 Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red framed pointer to the Input Menu icon. Press the Point ed buttons to move the red arrow pointer to Video and then press the SELECT button to display the Source Select Menu. 1 2 Move the pointer to the source that you want to select and then press the SELECT button.3 Menu Operation AutoW h e n s e l e c t i n g A u t o , t h e p r o j e c t o r automatically detects the incoming video s i g n a l , a n d a d j u s t s i t s e l f t o o p t i m i z e i t s p e r f o r m a n c e . T h e p r o j e c t o r s e l e c t s a connection in the following order: 1. S-Video . Video When video input signal is connected to the VIDEO jack, select Video. When video input signal is connected to the S-VIDEO jack, select S-Video. Video S-Video ✔ Note: • When the Input Search function is set On1 or On, the input signal will be searched automatically (p.46) • W h e n M o n i t o r o u t i s s e l e c t e d i n t h e Te r m i n a l function (p.47), Computer is not displayed. Move the pointer to Video and press the SELECT button. Move the pointer to the source that you want to select and press the SELECT button. Source Select Menu (VIDEO) Input Menu Input Menu icon Video
36 Video Input Computer 1 COMPUTER button INPUT button ✳ See Note at the bottom of this page. ✳ Remote Control Top ControlINPUT button COMPUTER button Computer 2 Video Computer 1 ✳Computer 2 Choose Computer 1 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.Before using these buttons, correct input source should be selected through Menu operation as described below. Input Source Selection (Component, RGB Scart 21-pin) Direct Operation Press the Point ed buttons to move the red arrow pointer to Computer 1 and then press the SELECT button. A f t e r t h e S o u r c e S e l e c t M e n u a p p e a r e d f o r Computer 1, move the pointer to Component or RGB (Scart) and then press the SELECT button. 1 2 3 Menu Operation Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red framed pointer to the Input Menu icon. When the input source is coming from v i d e o e q u i p m e n t c o n n e c t e d t o t h e C O M P U T E R I N 1 / C O M P O N E N T I N terminal with a Component-VGA Cable (not supplied), select Component. When the input source is coming from v i d e o e q u i p m e n t c o n n e c t e d t o t h e C O M P U T E R I N 1 / C O M P O N E N T I N terminal with a Scart-VGA Cable(not supplied), select RGB (Scart). Component RGB (Scart) Input Menu Move the pointer (red arrow) to Computer 1 and press the SELECT button. Input Menu icon Move the pointer to Component or RGB(Scart) and press the SELECT button. Source Select Menu Computer1 ✔ Note: • When the Input Search function is set On1 or On, the input signal will be searched automatically (p.46) • C o m p u t e r i s n o t d i s p l a y e d w h e n t h e COMPUTER IN /MONITOR OUT terminal is set as Monitor out. (p.47) Video Input
37
Video Input
Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red framed pointer to the AV System Menu icon.
Video System Selection
Press the Point ed buttons to move the red arrow pointer to the system that you want to select and then press the SELECT button.
1
2
If the projector cannot reproduce proper video image, it is necessary to select a specific broadcast signal f o r m a t a m o n g PA L , S E C A M , N T S C , N T S C 4 . 4 3 , PAL-M, and PAL-N. PAL/SECAM/NTSC/NTSC4 .43/PAL-M/PAL-N
The projector automatically detects incoming video signal, and adjusts itself to optimize its performance.
If the projector cannot reproduce proper video image, it is necessary to select a specific component video
signal format among 480i, 575i, 480p, 575p, 70p,
1035i, and 1080i.
COMPONENT VIDEO SIGNAL FORMAT
Video or S-Video
Component
The projector automatically detects incoming video system, and adjusts itself to optimize its performance.When Video System is PAL-M or PAL-N, select system manually.
Auto
Auto
AV System Menu (Video or S-Video)
AV System Menu (Component)
Move the pointer to a system and press the SELECT button. AV System Menu icon
Selected system is
displayed.
AV System Menu icon
Selected system is
displayed.
Move the pointer to a system and press the SELECT button.
✔ Note:
The AV System Menu cannot be selected when
selecting RGB (Scart).
38 Video Input S e l e c t a n i m a g e l e v e l a m o n g D y n a m i c , S t a n d a r d , Cinema, Blackboard (Green), Image 1, Image , Image 3, and Image 4 by pressing the IMAGE button on the remote control. Normal picture level preset on this projector. Picture level adjusted for the picture with fine tone. Standard Cinema Image 1 ~ 4 Image Level Selection Direct Operation Blackboard (Green) Picture level suitable for the image projected on a blackboard. This is mainly effective on a green colored board, not truly effective on a black colored board. Picture level suitable for viewing picture in a bright room. Dynamic User preset image in the Image Adjust Menu (p.39, 40). Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red framed pointer to the Image Select Menu icon. P r e s s t h e P o i n t e d b u t t o n s t o m o v e t h e r e d framed pointer to the level that you want to set and then press the SELECT button. Menu Operation 1 2 Normal picture level preset on this projector. Standard Picture level adjusted for the picture with fine tone. Cinema Picture level suitable for the image projected on a blackboard. See above for further description. Blackboard (Green) User preset image in the Image Adjust Menu (p.39, 40). Image 1~4 Picture level suitable for viewing picture in a bright room. Dynamic IMAGE button Image 4 Blackboard (Green) Remote Control IMAGE button Dynamic Standard Cinema Image 1 Image 2 Image 3 The level being selected. Image Select Menu Image Select Menu icon Move the red framed pointer to the level and press the SELECT button. Video Input
39 Video Input Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red framed pointer to the Image Adjust Menu icon. P r e s s t h e P o i n t e d b u t t o n s t o m o v e t h e r e d framed pointer to the item that you want to adjust, and then press the SELECT button. The level of each item is displayed. Adjust each level by pressing the Point 7 8 buttons. Image Level Adjustment 1 2 Image Adjust Menu Press the Point 7 button to decrease the contrast and the Point 8 button to increase contrast. (From 0 to 63.) Press the Point 7 button to adjust the image darker and the Point 8 button to adjust the image brighter. (From 0 to 63.) Contrast Brightness Press the Point 7 button to lighten the red tone and the Point 8 button to deepen the red tone. (From 0 to 63.) White balance (Red) Press the Point 7 button to lighten the green tone and the Point 8 button to deepen the green tone. (From 0 to 63.) White balance (Green) Press the Point 7 button to lighten the blue tone and the Point 8 button to deepen the blue tone. (From 0 to 63.) White balance (Blue) Press the Point 7 button or the Point 8 button for Color temp. level that you want to select. (XLow, Low, Mid, or High) Color temp . Press the Point 7 button to lighten the color and the Point 8 button to deepen the color. (From 0 to 63.) Press the Point 7 8 buttons to obtain a proper color. (From 0 to 63.) Color Tint ✔ Note: • T h e Ti n t c a n n o t b e s e l e c t e d w h e n t h e v i d e o system is PAL, SECAM, PAL-M, or PAL-N. • Afte r a d j u sti n g a n y o f th e Wh i te b a l a n ce R e d , Green, or Blue, the Color temp. changes to "Adj.". Press the Point 7 8 buttons to adjust the value. Press the SELECT button at this item to display other items. Press the SELECT button at this item to display previous items. Move the red framed pointer to the item to be selected and then press the SELECT button. Image Adjust Menu icon
40
Video Input
To reset the adjusted data, select Reset and press the SELECT button. The confirmation box appears and then select [Yes]. All adjustments returns to their previous figures.
Reset
Press the Point 7 8 buttons to obtain better balance of contrast. (From 0 to 15.)
Gamma
Press the Point 7 button to soften the image and the Point 8 button to sharpen the image. (From 0 to 15.)
Sharpness
To store the adjusted data, select Store and press the SELECT button. Select a level from Image 1 to 4 with the Point ed buttons and press the SELECT button. A confirmation box appears and then select [Yes].Stored data can be called up by selecting "Image" in the Image Level Selection on page 38.
Store
Exit the Image Adjust Menu.
Quit
✔ Note:
N o i s e r e d u c t i o n a n d P r o g r e s s i v e c a n n o t b e
selected when 480p, 575p, 70p, 1035i, or 1080i
is selected. (p.37)
I n t e r l a c e d v i d e o s i g n a l c a n b e d i s p l a y e d i n a progressive picture. Select one of the following.
Off . . . . disabled.
L1. . . . . Select "L1" for an active picture.
L. . . . . Select "L" for a still picture.
Film . . . Select "Film" for watching a film. With this function, the projector reproduces pictures faithful to the original film quality.
Progressive
Noise reduction
Noise interference on the screen can be reduced. Select one of the following to get smoother images.
Off . . . . disabled.
L1. . . . . lower reduction
L. . . . . higher reduction
Image Level MenuMove the red framed pointer to an image item to be set and then press the SELECT button.
Store item
The confirmation box appears and then select [Yes].
Video Input